Revision as of 19:55, 13 April 2017

Yuma yangcli Manual

YANG-Based Unified Modular Automation Tools

NETCONF Over SSH Client

Version 2.10

Preface

Legal Statements

Additional Resources

This document assumes you have successfully set up the software as described in the printed document:

Yuma Installation Guide

WEB Sites

Netconf Central
- http://www.netconfcentral.org/
- Yuma Home Page
  - Free information on NETCONF and YANG, tutorials, on-line YANG module

validation and documentation database

Yuma SourceFource OpenSource Project
- [http://sourceforge.net/projects/yuma/

http://sourceforge.net/projects/yuma/]

- - Download Yuma source and binaries; project forums and help
Yang Central
- http://www.yang-central.org
- Free information and tutorials on YANG, free YANG tools for download
NETCONF Working Group Wiki Page
- [http://trac.tools.ietf.org/wg/netconf/trac/wiki

http://trac.tools.ietf.org/wg/netconf/trac/wiki]

- Free information on NETCONF standardization activities and NETCONF

implementations

NETCONF WG Status Page
- http://tools.ietf.org/wg/netconf/
- IETF Internet draft status for NETCONF documents
libsmi Home Page
- [http://www.ibr.cs.tu-bs.de/projects/libsmi/

http://www.ibr.cs.tu-bs.de/projects/libsmi/]

- Free tools such as smidump, to convert SMIv2 to YANG
YumaWorks
- http://www.yumaworks.com
- Offers support, training, and consulting for Yuma.
- Offers YumaPro, a professional version of Yuma that includes

concurrency, external database support, sub-agent support, multiple northbound interfaces, and more. API compatible with Yuma. Availability: September, 2012. Licensed.

Transpacket
- http://www.transpacket.com
- Offers Linux based embedded operating system distribution which uses

Yuma for configuration and monitoring.

- Offers support, training, and consulting for YANG and netconf.

Mailing Lists

NETCONF Working Group
- http://www.ietf.org/html.charters/netconf-charter.html
- Technical issues related to the NETCONF protocol are discussed on the

NETCONF WG mailing list. Refer to the instructions on the WEB page for joining the mailing list.

NETMOD Working Group
- [http://www.ietf.org/html.charters/netmod-charter.html

http://www.ietf.org/html.charters/netmod-charter.html]

- Technical issues related to the YANG language and YANG data types are

discussed on the NETMOD WG mailing list. Refer to the instructions on the WEB page for joining the mailing list.

Conventions Used in this Document

The following formatting conventions are used throughout this document:

Documentation Conventions

Convention	Description
style="border-top:none;border-bottom:0.05pt solid 000000;border-left:0.05pt solid 000000;border-right:none;padding:0.0382in;"\| --foo	style="border-top:none;border-bottom:0.05pt solid 000000;border-left:0.05pt solid #000000;border-right:0.05pt solid 000000;padding:0.0382in;"\| CLI parameter foo
style="border-top:none;border-bottom:0.05pt solid 000000;border-left:0.05pt solid 000000;border-right:none;padding:0.0382in;"\| <foo>	style="border-top:none;border-bottom:0.05pt solid 000000;border-left:0.05pt solid #000000;border-right:0.05pt solid 000000;padding:0.0382in;"\| XML parameter foo
style="border-top:none;border-bottom:0.05pt solid 000000;border-left:0.05pt solid 000000;border-right:none;padding:0.0382in;"\| foo	style="border-top:none;border-bottom:0.05pt solid 000000;border-left:0.05pt solid #000000;border-right:0.05pt solid 000000;padding:0.0382in;"\| yangcli command or parameter
style="border-top:none;border-bottom:0.05pt solid 000000;border-left:0.05pt solid 000000;border-right:none;padding:0.0382in;"\| $FOO	style="border-top:none;border-bottom:0.05pt solid 000000;border-left:0.05pt solid #000000;border-right:0.05pt solid 000000;padding:0.0382in;"\| Environment variable FOO
style="border-top:none;border-bottom:0.05pt solid 000000;border-left:0.05pt solid 000000;border-right:none;padding:0.0382in;"\| $$foo	style="border-top:none;border-bottom:0.05pt solid 000000;border-left:0.05pt solid #000000;border-right:0.05pt solid 000000;padding:0.0382in;"\| yangcli global variable foo
style="border-top:none;border-bottom:0.05pt solid 000000;border-left:0.05pt solid 000000;border-right:none;padding:0.0382in;"\| some text	style="border-top:none;border-bottom:0.05pt solid 000000;border-left:0.05pt solid #000000;border-right:0.05pt solid 000000;padding:0.0382in;"\| Example command or PDU
style="border-top:none;border-bottom:0.05pt solid 000000;border-left:0.05pt solid 000000;border-right:none;padding:0.0382in;"\| some text	style="border-top:none;border-bottom:0.05pt solid 000000;border-left:0.05pt solid #000000;border-right:0.05pt solid 000000;padding:0.0382in;"\| Plain text

yangcli User Guide

Program Components

[[Image:]]

Introduction

The yangcli program is a NETCONF over SSH client application. It is driven directly by YANG modules, and provides a simple but powerful application interface for any YANG file. There is no configuration required at all to use any YANG file, although there are some YANG extensions that will be utilized if present.

Features

The yangcli client has the following features:

Automatic support for all NETCONF protocol operations, including several 'short-hand' commands for the most common operations, like <edit-config> and <get-config>.
Automated database locking, unlocking and error cleanup, using the

high-level get-locks and release-locks commands.

Automatic, standards-based, server schema synchronization, using the YANG module capability URI information in the <hello> PDU, and the <get-schema> operation:
- For each session, the exact view of the server schema definition tree

is created, based on the module capability:

- - module namespace
  - module name
  - module revision date
  - enabled features
  - names of any modules that contain deviations for this module
- The help text and parameter validation for each session will be

tailored to the capabilities advertised by the server.

- Parses each potential matching YANG file to make sure the module

name, revision date, and namespace URI value are all exactly the same as the values in the module capability URI.

Understands all NETCONF protocol capabilities, and complex hard-wired

logic simplifies protocol usage, and allows high-level commands to pick appropriate defaults for many RPC operation parameters.

Load any YANG module at boot-time or run-time and start using it

immediately.

Full concurrent support for multiple revisions of the same module.
Supports NETCONF notifications, including :interleave capability.
Full XPath 1.0 and subtree filtering support.
Automatic support for all YANG language mechanisms, including

extensions.

Any YANG <rpc> operation is automatically

available as a yangcli command.

Uses YANG files directly as input, so no pre-processing or

configuration needed to use a new module.

Can be called from unix scripts in 'batch-mode' to automatically

establish a NETCONF session, issue a command or invoke a yangcli script, close the session, and return the results.

Extensive interactive shell environment, including user variables,

file variables, smart parameter set completion, and a simple scripting environment for automatic operation.

Automatic, context-sensitive (tab key) command-line completion.
Full support for XPath, instance-identifier, leafref, and identityref

parameters.

Automatic, context-sensitive help system, based completely on YANG

files and using the exact modules supported by the current NETCONF session, if connected.

Full, customizable command line editing, using emacs by default,

but vi or a custom set of keystroke bindings are also supported.

Command line history and command recall.
Store and recall command line history files for later use.
Automatic NETCONF session management, including support for all YANG extensions to the <capability> element.
Automatic recognition and support for all NETCONF 'capability' related

operations.

Automatic support for all YANG additions to the NETCONF protocol, such

as the insert operation

Unlimited nested scripts with up to 10 parameters each can automate

testing and other management tasks

User configurable command aliases that can be saved and restored.

Starting yangcli

The current working directory in use when yangcli is invoked is important. It is most convenient to run yangcli from a work directory, rather than the installation directory or within the module library.

The yangcli program can be invoked several ways:

To get the current version and exit:

        yangcli --version

To get program help and exit:

        yangcli --help
        yangcli --help --brief
        yangcli --help --full

To start an interactive session with the default parameters:

        yangcli

To start an interactive session with a new log file:

        yangcli --logfile=mylogfile

To start an interactive session and append to an existing log

file:

        yangcli --logfile=mylogfile
--log-append

To get parameters from a configuration file:

        yangcli --config=~/yangcli.conf

To begin to connect to a server upon startup, provide the

--server parameter. The connect command will be started upon startup and the user will be prompted to enter the rest of the mandatory parameters to the connect command.

        yangcli server=myserver.example.com

To connect to a server and automatically connect without any

interactive interruption, enter the --server, --user, and --password parameters. A session startup will be attempted right away, using these parameters. Any optional parameters for the connect command (--port or --timeout) may be entered as well. All parameters can be entered from a config file, and/or the command line.

        yangcli --server=myserver.example.com \
            --user=andy --password=yangrocks

To automatically connect to a server, run a script in non-interactive

mode, and then remain connected to the server, add the --run-script parameter to the connection parameters. The --runpath parameter can also be entered, if needed.

        yangcli --server=myserver.example.com \
            --user=andy --password=yangrocks \
            --run-script=mytestscript

To automatically connect to a server, run a script in non-interactive

mode, and then exit the program, add the --batch-mode and --run-script parameters to the connection parameters. The --runpath parameter can also be entered, if needed.

        yangcli --server=myserver.example.com \
            --user=andy --password=yangrocks \
            --run-script=mytestscript --batch-mode

To automatically connect to a server, and run a single command instead

of a script, and then exit, use the --run-command parameter instead of the --run-script parameter. The --batch-mode parameter can be left out to remain in the current session (in interactive mode) after the command is invoked.

        yangcli --server=myserver.example.com \
            --user=andy --password=yangrocks \
            --batch-mode --run-command=”sget /system”

Stopping yangcli

To terminate the yangcli program, use the quit command.

The control-C character sequence will also cause the program to be terminated.

Statements

The yangcli script interpreter accepts several types of statements:

yangcli Statements

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| type	style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| description	example
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| command	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| invoke a local command and/or send an <rpc> to the server	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| sget /system
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| variable assignment	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| set a user variable to some value	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| $system = sget /system
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| file assignment	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| set the contents of a file to some value	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| @save.txt = $system
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| variable deletion	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| delete a user variable or clear a system variable	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| $system =

A command can be as simple like 'get' or complex, like 'edit-config'.

A variable assignment sets the specified user or system variable to the right hand side of the expression. An expression has many forms, including the result from a local command or a remote NETCONF operation.

If a string that matches a command is used as the assignment value, then it must be entered in quotes (single or double). For example, the $$default-operation system configuration variable accepts enumeration values which also match RPC commands:

yangcli> $$default-operation = 'merge'

A file assignment is essentially the same as a variable assignment, except the right hand side of the expression is saved in the specified file, instead of a user variable.

To delete a user variable, leave the right hand side of the expression empty (or just whitespace).

Note: More statement types will be available in the next release.

Commands

The yangcli program has several built-in commands, defined in yangcli.yang, yuma-netconf.yang, and notifications.yang.

The YANG rpc statement is used to define the syntax and behavior of each command.

There are 2 types of yangcli commands:

local: the command is executed within the yangcli application,

and can be invoked at any time.

remote: the command is executed on the remote server, and is

only available when a NETCONF session is active. Any YANG rpc statement that yangcli does not recognize as a local command is treated as a remote command available on the server.

Local Commands

The following table shows the standard NETCONF protocol operations that are directly available for use, depending on the capabilities of the server.

Standard NETCONF Commands

The following yangcli commands are available for simplified access to standard NETCONF operations

Custom NETCONF Commands

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| command	description
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| create	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| Invoke an <edit-config> create operation
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| delete	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| Invoke an <edit-config> delete operation
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| get-locks	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| Lock all the databases with the <lock> operation
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| insert	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| Invoke an <edit-config> YANG insert operation
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| merge	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| Invoke an <edit-config> merge operation
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| release-locks	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| Unlock all the locked databases with the <unlock> operation
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| remove	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| Invoke an <edit-config> remove operation
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| replace	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| Invoke an <edit-config> replace operation
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| save	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| Save the current edits on the server in NV-storage
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| sget	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| Invoke a <get> operation with a subtree filter
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| sget-config	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| Invoke a <get-config> operation with a subtree filter
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| xget	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| Invoke a <get> operation with an XPath filter
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| xget-config	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| Invoke a <get-config> operation with an XPath filter

The following table shows the extended NETCONF protocol operations that are available on the netconfd server only.

Extended netconfd Commands

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| command	description
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| get-my-session	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| Retrieve session customization parameters
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| load	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| Load a module into the server.
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| no-op	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| No operation.
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| restart	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| Restart the server.
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| set-log-level	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| Set the server logging verbosity level.
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| set-my-session	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| Set session customization parameters.
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| shutdown	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| Shutdown the server.

Variables

The yangcli program utilizes several types of user-accessible variables. These variables can be listed with the 'show vars' command and other commands as well.

A variable reference consists of 1 or 2 dollar signs ('$'), followed immediately by a valid identifier string (e.g., $$global-log or $local-log).

Variables can be 1 or more characters in length, and follow the YANG rules for identifier names. The first character must be a letter, 'A' to 'Z', or 'a' to 'z'. The 2^nd to last characters can be a letter 'A' to 'Z', or 'a' to 'z', number ('0' to '9'), an underscore ('_'), a dash ('-'), or a period ('.') character.

There are 4 categories of parameters supported:

Read-only system variables
Read-write system variables
Read-write global user variables (saved in $HOME/.yuma directory)
Read-write local user variables

It is an error if a variable is referenced (in the right-hand-side of a statement) that does not exist.

The first 3 types are global variables, which means that they are available to all run-levels of all scripts. The last type, called a local variable, is only visible to the current run-level of the current script (or interactive shell). Refer to the following section for more details on run levels.

Variable Syntax

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| syntax	style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| description	example
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| $$<variable-name>	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Left hand side: set the global variable to some value	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| $$saved_get = get
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| $$<variable-name>	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Right hand side: access the value of a global variable	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| fill --target=\ $$mytarget
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| $<variable-name>	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Left hand side: set the local variable to some value	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| $myloglevel = \ $$log-level
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| $<variable-name>	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Right hand side: access the value of any variable with this name (try local, then global)	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| $myuser = $user

The following table shows the unix environment variables that are available as read-only global variables in yangcli. These variables are set once when the program is started, and cannot be used in the the left hand side of an assignment statement.

Read-only system variables

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| variable	description
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| $$HOME	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| the HOME environment variable
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| $$HOSTNAME	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| the HOST or HOSTNAME environment variable
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| $$LANG	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| the LANG environment variable
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| $$PWD	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| the PWD environment variable, when yangcli was invoked
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| $$SHELL	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| the SHELL environment variable
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| $$USER	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| the USER environment variable
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| $$YUMA_DATAPATH	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| the YUMA_DATAPATH environment variable
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| $$YUMA_HOME	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| the YUMA_HOME environment variable
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| $$YUMA_MODPATH	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| the YUMA_MODPATH environment variable
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| $$YUMA_RUNPATH	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| the YUMA_RUNPATH environment variable

The following table shows the CLI configuration parameters that can be read or changed (but not deleted). If a particular parameter was not set during program invocation, then the associated variable will contain the empty string.

Read-write system variables

Read-write global user variables

If a unrecognized global variable (e.g., $$foo) is used in the left-hand side of an assignment statement, then a global user variable will be created with that name. If the global user variable already exists, then its value will be overwritten.

The uservars command can be used to load or store these variables so they are loaded at boot-time. By default, the XML file used to store these variables is $HOME/.yuma/yangcli_uservars.xml.

Read-write local user variables

If a local variable (e.g., $foo) is used in the left-hand side of an assignment statement, then a local user variable will be created with that name. If the local user variable already exists, then its value will be overwritten. If the variable is created within a script (i.e., run-level greater than zero), then it will be deleted when the script exits.

Files

File contents can be used in yangcli statements, similar to user variables.

A file reference consist of the 'at-sign' character ('@') followed immediately by a valid file specification.

    @foo.yang = get-schema --identifier=foo --version=””

--format=”YANG”

    mgrload --module=foo

If the file extension is “.yang”, “.log”, “.txt”, or “.text”, then the value (or command output) will be saved, and yangcli will strip off the outermost XML (if needed) to save the requested file as a pure text file. Otherwise, the file will be saved in XML format. The display mode set by the user can affect XML output. If the display mode i s'xml-nons' then XML without namespace (xmlns) attributes will be generated instead of normal XML.

Note: The --display-mode configuration parameter, and $$display-mode system variable, only affect the output and display of data in the yangcli program. NETCONF protocol messages are always sent in 'xml' mode.

Files may also be used as parameter replacements, within a command.

    $saved_get = get [mailto:--filter%3D@filter.xml

--filter=@filter.xml] --with-defaults=explicit

It is an error if the file referenced does not exist or cannot be read.

Scripts

Any command can be entered at the interactive shell, or stored in a script file, and invoked with the 'run' command. Scripts are simply text files, and the extension used does not matter.

There are no formal templates for scripts, like there are for RPC operations, at this time. Instead, positional parameters can be passed to any script.

The parameters named --P1 to --P9 allow up to 9 parameters to be passed to any script. Within each script, the numbered parameters '$1' to '$9' are available, and contain the value that was passed as the corresponding ---Pn” parameter when calling the script.

If a line contains only optional whitespace, followed by the pound sign character '#', then the line is treated as a comment. These lines will be skipped.

If an error occurs during a command within a script, or an <rpc-error> is received from the server during a NETCONF session, then the running script will be canceled, and if this was a nested script, then all parent scripts will also be canceled.

Script Example:

    run connect --P1=andy --P2==localhost --P3=yangrocks

    // connect script
    # start a NETCONF session
    $user = $1
    $server = $2
    $password = $3

    connect --user=$user --server=$server --password=$password

Run Levels

The run command can appear in a script.

When yangcli starts up, either in interactive mode or in batch mode, the script interpreter is at run level zero. Each time a run command is invoked, either at the command line or within a script currently being invoked, a new run level with the next higher value is assigned. Local variables are only visible within the current run level.

A maximum of 512 run levels are supported in yangcli.

Scripts can be called recursively, but a stop condition needs to be used to break the recursion (e.g., call the script from within a conditional code block.

Conditional Command Blocks

The 'if', 'elif', 'else', and 'end' commands are used to create an 'if command sequence'.

Any other commands that appear between these commands are part of a conditional command block.

These blocks can be nested. The current conditional state is inherited, so an if command sequence within a false conditional block will not be executed. A block can contain zero or more command lines,

These command work exactly like an 'if' expression within a program language such as Python. Note that indentation is not significant, but it may be used to make scripts more readable.

The 'if' command starts a new if-command sequence. It is followed by a conditional command block. This block ends when an 'elif', 'else', or 'end' command within the same if command block is encountered.

At most, only one conditional code block within the if command sequence will be executed. Once a conditional command block has been exectuted, any remaining blocks will be skipped.

All user and system variables that are available to the current script run level can be used within the XPath expressions for determining the conditional block state (true or false).

Conditional Command Loop Blocks

The 'while' and 'end' commands are used to create an 'while loop sequence'.

Any other commands that appear between these commands are part of a conditional command loop block.

These blocks can be nested. The current conditional state is inherited, so a while loop sequence within a false conditional block will not be executed. A block can contain zero or more command lines,

The loop condition can be a constant expression. The maxloops parameter will prevent infinite looping, and can be utilized to use the while loop sequence as a simple 'for' loop, iterating a specific number of times.

All user and system variables that are available to the current script run level can be used within the XPath expressions for determining the conditional block state (continue or terminate loop).

Sample Script

The following script does not do any useful work.

It is provided to demonstrate some simple constructs.

$x = 0
while '$x < 2'
  # this is a comment
  log-info 'start 1'
  $x = eval '$x + 1'
  $y = 0
  while '$y < 4'
    log-info 'start 2'
    $y = eval '$y + 1'
    if "module-loaded('test')"
      log-info 'module test loaded'
    elif '$x > 1'
      log-info 'x>1'
    elif "feature-enabled('test3', 'feature1')"
      log-info 'feature1'
    else
      log-info 'else'
    end
    log-info 'end 2'

  end
  log-info 'end 1'
end
if "feature-enabled('test5', 'feature-foo')"
  log-info 'feature-foo'
  run add-foo-parms
end

Configuration Parameter List

The following configuration parameters are used by yangcli. Refer to the CLI Reference for more details.

yangcli CLI Parameters

Invoking Commands

Commands can be entered with parameters:

in one continuous line

merge target=/toaster/toastControl --value=”down”

in several lines (using line continuation)

merge target=/toaster/toastControl \
 --value=”down”

interactively prompted for each parameter

merge
  (will be prompted for target and value)

a combination of the above

merge target=/toaster/toastControl
  (will be prompted for value)

When a command is entered, and the yangcli script interpreter is running in interactive mode (--batch-mode not active), then the user will be prompted for any missing mandatory parameters.

If the --optional parameter is present (or the $$optional system variable is set to 'true'), then the user will be prompted for any optional parameters that are missing.

A command has the basic form:

<name (QName)> <parameter (any YANG type)>*

The command name is a qualified name matching the name used in the YANG rpc statement. This is followed by zero or more parameters (in any order).

A command parameter has the same syntax as a CLI configuration parameter.

The command name syntax is described below.

An un-escaped end-of-line character ('enter key') terminates command line input.

Command Prompt

The yangcli command prompt changes, depending on the context.

Idle Mode:

If the script interpreter is idle and there is no NETCONF session active, then the prompt is simply the program name:

    yangcli>

If the script interpreter is idle and there is a NETCONF session active, then the prompt is the program name, followed by ' <user>@<server>', depending on the parameters used in the connect command:

    yangcli andy@myserver>

Continuation Mode:

If a backslash, end-of-line sequence ended the previous line, the prompt will simply be the word 'more' indented 3 spaces:

    yangcli andy@myserver> get \
       more>

The 'more>' prompt will continue if the new line also ends in with an escaped end-of-line. When a new line is finally terminated, all the fragments are spliced together and delivered as one command line.

Note: context-sensitive command completion is not available in this mode.

Choice mode:

If a partial command has been entered in interactive mode, and the script interpreter needs to prompt for a YANG 'choice' parameter, then a list of numbered cases will be presented, and the prompt will be the same as it was before (depending on whether a NETCONF session is active or not), except a colon character (':'), followed by the command name, will be added at the end. As long as parameters for the same command are being entered (i.e., prompted for child nodes within a selected case, the command name will be appended to the prompt.

yangcli andy@myserver> sget

Enter a number of the selected case statement:

  1: case varref: 
       leaf varref 
  2: case from-cli: 
       leaf target 
       leaf optional 
       anyxml value

Enter choice number [1 - 2]: 
yangcli andy@myserver:sget>

Parameter mode:

If a partial command has been entered in interactive mode, and the script interpreter needs to prompt for a leaf or leaf-list, then the parameter name will appear in angle brackets ('<' and '>').

Filling mandatory case /sget/input/from/from-cli: 
Enter string value for leaf <target> 
yangcli andy@myserver:sget>

If the 'ncx:password' extension is part of the YANG definition for the leaf or leaf-list, then the characters entered at the prompt in this mode will not be echoed, and they will not be saved in the command history buffer. Any default value will not be printed either. Instead, 4 asterisks '****' will be printed, even though the correct value will be used in the command.

If a default value is available, it will appear in square brackets ('[' and ']'). In this case, entering 'return' will not be interpreted as an empty string, but rather the default value that was presented.

yangcli> connect

Enter string value for leaf <user> [andy] 
yangcli:connect>

Enter string value for leaf <server> [myserver] 
yangcli:connect>

Enter string value for leaf <password> [****] 
yangcli:connect> 
Enter uint16 value for leaf <port> [830]

yangcli:connect> 
Enter uint32 value for leaf <timeout> [30]

yangcli:connect>

Note: After a NETCONF session is terminated for any reason, the connection parameters will be remembered , and presented as defaults the next time the connect command is entered.

False Conditional Block Mode

If a conditional command (if, elif, else, or while command) is active, but the conditional expression is false, then any commands defined within that conditional block will not be executed. If this occurs in interactive mode instead of a script, the string '[F]' will be added to the command prompt. Note that the 'help' and 'log-info' commands do not get executed in the following example:

yangcli> if 0

yangcli[F]> help

yangcli[F]> log-info 'this will not get printed'

yangcli[F]> end

yangcli>

Command Name

The command name can be entered with or without an XML prefix:

yangcli andy@myserver> nc:get
yangcli andy@myserver> get

If there is a prefix (e.g., 'nc:get'), then it needs to be one of the XML prefixes in use at the time. Use the 'show modules' command to see the modules and prefixes in use. The YANG prefix will usually be the same as the XML prefix, but not always.

XML prefixes are required to be unique, so if any 2 YANG modules pick the same prefix, then 1 of them has to be changed for XML encoding purposes.

If the --default-module configuration parameter (or $$default-module system variable) is set, it will be used to resolve a command name without any prefix, if it is not a NETCONF or yangcli command.

An error message will be printed if the command entered cannot be found in any YANG module, or if there are multiple commands that match the same string.

ncx:default-parm Extension

Each command may define a default parameter, by placing an 'ncx:default-parm' extension in the rpc input section in the YANG rpc statement. This extension allows less typing in yangcli to accomplish the same thing.

If the script interpreter encounters a string in the command line that is not a recognized parameter for that command, and there is a default parameter defined, then the string will be used as a value for the default parameter.

For example, the 'show' parameter is the default parameter for the 'history' command, so both of these commands will be interpreted to mean the same thing:

    history --show=10
    history 10

Note: the default parameter does not allow the wrong form of a parameter type to be entered, to accept the default for that parameter. For example, the 'show' parameter above has a default value of '25':

    # this is the same as history show=25
    history

    # this is an error, not the same as the above
    history show

The following table shows the default parameters that are available at this time.

Default Parameters

Parameter Mode Escape Commands

There are 4 escape sequence commands that can be used while entering parameters.

They all begin with the question mark character ('?'), and end with the 'Enter' key.

Control key sequences are not used because that would interfere with command line editing keys.

Parameter mode escape sequences

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| escape sequence	description
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| ?	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| Print some help text
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| ??	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| Get all available help text
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| ?s	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| Skip this parameter
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| ?c	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| Cancel this command

Note: If the current parameter is considered hidden (ncx:hidden extension used in the YANG definition), then no help will be available for the parameter, even though it is accessible. This also apples to the help command. Any command or parameter designated as ncx:hidden will be treated as an unknown identifier, and no help will be given.

Note: Skipping mandatory nodes with the '?s' command is affected by the --bad-data configuration parameter and $$bad-data system variable. An error, warning, or confirmation check may occur. Refer to the CLI Reference for more details.

Note: If there are any YANG defined values (e.g., enumeration, bits, default-stmt) available for the current parameter, then pressing the tab key will list the full or partial completions available.

Using XPath Expressions

There are some command parameters, such as the --target parameter for the create command, that accept XPath absolute path expressions.

If prefixes are present, then they must match the set of XML prefixes in use at the time. Use the show modules command to see the current set of prefixes.

If prefixes are not used, then the first available matching XML namespace will be used instead.

If the starting forward slash character ('/') is missing, then it will be added.

    # these are all the same value
    yangcli:fill> system
    yangcli:fill> /system
    yangcli:fill> /sys:system

It is important to remember 2 simple rules to avoid common errors in XPath expressions:

String constants must be quoted with single quote

characters.The expression [name=fred] is not the same as [foo='fred'].The former compares the 'name' node value to the 'fred' node value.The latter compares the 'name' node value to the string 'fred'.

The double quote character ('”') is not allowed in XPath

--select parameter expressions because the expression will be sent to the server inside a double-quoted string.

If an incomplete XPath absolute path expression is entered, and the script interpreter is in interactive mode, then the user will be prompted to fill in any missing mandatory nodes or key leafs.

    # complete form of ifMtu leaf
    yangcli:fill>
/interfaces/interface[name='eth0']/ifMtu
    # incomplete form of ifMtu leaf

    yangcli:fill> /interfaces/interface/ifMtu

    Filling key leaf <name>:
    Enter string value:

The --select parameter for the xget and xget-config commands accepts full XPath expressions. The expression must yield a node-set result in order to be used as a filter in NETCONF get and get-config operations.

One of the simplest XPath filters to use is the descendant-or-self filter ('//<expr>').

For example, this command will retrieve all instances of the 'ifMtu' leaf:

    xget //ifMtu

When interface (or any list) entries are returned by netconfd, they will contain the the entire path back to the root of the YANG module, not just the specified node. Also, any key leafs within a list are added. This is only done if the XPath expression is missing any predicates for key leafs.

This is different than XPath 1.0 as used in XSLT. Since NETCONF get and get-config operations return complete XML instance documents, not node-sets, the ancestor nodes and naming nodes need to be added.

    # reply shown with --display-mode=plain
    data {
       interfaces {
             interface eth0 {
            name eth0
            ifMtu 1500
          }
             interface eth1 {
            name eth1
            ifMtu 1518
          }
       }
    }

Special Parameter Handling

Some special handling of YANG data structures is done by the script interpreter.

Containers

Some parameters, such as the --source and --target parameters in many commands, are actually represented as a container with a single child -- a choice of several leaf nodes. In this situation, just the name of the desired leaf node can be entered (when in idle mode), as the 'contents' of the container parameter.

    sget-config /system source=candidate

Choices and Cases

If a parameter name exact-match is not found, and a partial match is attempted, then choice and case node names will be ignored, and not cause a match.

Since these nodes never appear in the XML PDUs they are treated as transparent nodes (wrt/ parameter searches) unless they are specified with their full name.

Parameters that are a choice of several nodes, similar to above, except without a parent container node, (e.g., --help-mode) can be omitted. The accessible child nodes within the case nodes can be entered directly (e.g., sget --target parameter).

# this is not allowed because 'help-mode' is not
complete
yangcli> help --command=help --help-mo=brief

# this is allowed because 'help-mode' is complete,
# even though help-mode is a choice and 'brief' is
# an empty leaf
yangcli> help help help-mode=brief

# choice and case names are transparent when
# searching for parameter names, so the
# following command is the same as above
yangcli> help help brief

Lists and Leaf-Lists

When filling a data structure and a descendant node is entered, which is a YANG list or leaf-list, then multiple entries can be entered. After the node is filled in, there will be a prompt (Y/N, default no) to add more list or leaf-list entries.

Binary Data Type

The YANG binary data type is supported. Parameters of this type should be entered in plain text and they will be converted to binary format.

Command Completion

The 'tab' key is used for context-sensitive command completion:

If no command has been started, a list of available commands is

printed

If a partial command is entered, a list of commands which match the

characters entered so far is printed

If a command is entered, but no parameters, then a list of available

parameters is printed

If a command is entered, and the cursor is within a command name, then

a list of parameters which match the characters entered so far is printed

If a command is entered, and the cursor is after a command name, but

not within a value string, then a list of available parameters is printed

If a command is entered, and the cursor is within a command value,

then a list of possible values which match the characters entered so far is printed. Note that not all data types support value completion at this time.

If no values are available, but a default value is known, that value

will be printed

If a session is active, and whitespace followed by the forward slash

'/' character is entered, a list of top-level data node names is printed. Once a top-level name and a trailing slash '/' character is entered, pressing the tab key again will print the names of the child nodes of the current data node. Only schema-node strings are supported at this time. Auto-completion will not work if predicates are present in the absolute path expression.

Command list example: no NETCONF session is active:

    yangcli> <hit tab key>
    cd       fill     history  mgrload  quit     run      
    connect  help     list     pwd      recall   show

Command list example: NETCONF session is active

    yangcli andy@myserver.example.com> <hit tab key>
    cd                   get-schema           recall 
    close-session        help                 replace 
    commit               history              restart 
    connect              insert               run 
    copy-config          kill-session         save 
    create               list                 sget 
    create-subscription  load                 sget-config 
    delete               load-config          show 
    delete-config        lock                 shutdown 
    discard-changes      merge                unlock 
    edit-config          mgrload              validate 
    fill                 no-op                xget 
    get                  pwd                  xget-config 
    get-config           quit

Command Line Editing

The command line parser is based on libtecla, a freely available library.

The home page is located here:

[http://www.astro.caltech.edu/~mcs/tecla/ http://www.astro.caltech.edu/~mcs/tecla/]

The complete user guide for configuring libtecla is located here:

[http://www.astro.caltech.edu/~mcs/tecla/tecla.html http://www.astro.caltech.edu/~mcs/tecla/tecla.html]

If the file $HOME/.teclarc exists, then libtecla will use it to configure the key bindings.

By default, libtecla uses emacs key bindings. There is no need for any further libtecla configuration if emacs mode is desired.

In order to use the vi editor key bindings, the $HOME/.teclarc file must exist, and it must contain the following line:

        edit-mode vi

Custom key bindings are also available. Refer to the libtecla documentation for more details on command line editing key customization.

The control key sequence (^F == control key and f key at the same time). The letter is not case-sensitive, so ^F and ^f are the same command.

The alt key sequence (M-f == alt key and f key at the same time). The letter is not case-sensitive, so M-F and M-f are the same command.

The following table shows the the most common default key bindings:

Common editing key bindings

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| command	description
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| ^F	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| cursor right
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| ^B	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| cursor-left
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| ^A	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| beginning of line
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| ^E	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| end of line
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| ^U	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| delete line
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| M-f	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| forward-word
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| M-b	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| backward word
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| ^P	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| up history
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| ^N	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| down history

Command History

Each command line is saved in the command history buffer, unless a password is being entered in parameter mode.

By default, the previous history line (if any) will be shown if the ^P key is pressed.

By default, the next history line (if any) will be shown if the ^N key is pressed.

In addition, the history command can be used to control the command line buffer further. This command has 4 sub-modes:

show: show maximum of N history entries (default is 25)
clear: clear the history buffer
save: save the history buffer to a file
load: load the history buffer from a file

By default, the command line history buffer is loaded when the program starts, and saved when the program exits. This behavior can be turned off by setting the --autohistory configuration parameter to 'false'.

The '!' character is special when editing commands. If the first character is '!', and it is followed by a number or a non-zero character, the line will be interpreted as a recall request:

yangcli> !42 == recall command number 42 (same as recall 42)
yangcli> !get == recall the most recent command line starting with 'get'

Refer to the Command Reference section for more details on the history command.

Command Responses

The command output and debugging messages within yangcli is controlled by the current log level (error, warn, info, debug, debug2, debug3).

If a command is executed by the script interpreter, then a response will be printed, depending on the log level value.

If the log level is 'info' or higher, and there were no errors and no response, then the string 'OK' is printed.

    yangcli> $foo = 7
       OK
    yangcli>

If the log-level is set to 'error' or 'warn', then the 'OK' messages will be suppressed.

If the log level is set to 'debug' or higher, then responses from the server will be echoed to the log (file or STDOUT). The current display mode will be used when printing data structures such as <rpc-error> and <notification> element contents.

If an error response is received from the server, it will always be printed to the log.

yangcli andy@myserver> create /system

Filling container /system: 
RPC Error Reply 5 for session 8:

rpc-reply { 
   rpc-error { 
      error-type application 
      error-tag access-denied 
      error-severity error 
      error-app-tag limit-reached 
      error-path /nc:rpc/nc:edit-config/nc:config/sys:system 
      error-message 'max-access exceeded' 
   } 
}

yangcli andy@myserver>

Refer the the --log-level parameter in the CLI Reference for more details.

NETCONF Sessions

The yangcli program can be connected to one NETCONF server at a time.

Run multiple instances of yangcli to control multiple agents at once.

Use the connect command to start a NETCONF session.

This section explains how to use yangcli to manage a NETCONF server, once a session is established.

When a NETCONF session starts up, a <capability> exchange is done, and the server reports exactly what content it supports. This information is used extensively to customize the session, and report errors and warnings for the session.

Connection Startup Screen

If the --log-level is set to 'info' of higher, then a startup screen will be displayed when a NETCONF session is started. It contains:

startup banner
client session ID
server session ID
protocol capabilities supported by the server
- Includes revision-date of supported module
YANG modules supported by the server
- Includes any features and deviations supported in the module
Enterprise specific capabilities supported by the server
Default target database (<candidate> or <running>)
Save operation mapping for the server
with-defaults reporting capability reported by the server

The following example shows a typical startup screen connecting to the netconfd server:

NETCONF session established for andy on myserver

Client Session Id: 1 
Server Session Id: 8

Server Protocol Capabilities 
   Protocol Version: RFC 4741 
   candidate:1.0 
   rollback-on-error:1.0 
   validate:1.0 
   xpath:1.0 
   notification:1.0 
   interleave:1.0 
   with-defaults:1.0 
   netconf-monitoring:1.0 
   schema-retrieval:1.0

Server Module Capabilities 
   ietf-inet-types@2009-11-10 
   ietf-netconf-monitoring@2009-11-20 
   ietf-with-defaults@2009-07-01 
      Features: 
         with-defaults 
   ietf-yang-types@2009-11-10 
   nc-notifications@2008-07-14 
   notifications@2008-07-14 
   test@2009-12-26 
      Features: 
         feature1 
         feature3 
         feature4 
   yuma-app-common@2010-01-25 
   yuma-interfaces@2009-11-21 
   yuma-mysession@2009-08-11 
   yuma-nacm@2009-11-21 
   yuma-ncx@2009-12-21 
   yuma-proc@2009-11-21 
   yuma-system@2009-12-27 
   yuma-types@2010-01-25

Server Enterprise Capabilities 
   None

Default target set to: <candidate> 
Save operation mapped to: commit 
Default with-defaults behavior: explicit 
Additional with-defaults behavior: trim:report-all

Checking server Modules...

yangcli andy@myserver>

Server Tailored Context

[[Image:]]

While a NETCONF session is active, the set of available YANG modules will be set to the modules that the server is using, if the --autoload configuration parameter is enabled.

If the :schema-retrieval capability is also available on the server, then the <get-schema> operation will be attempted for any YANG module specified in the <hello> message capabilities, but not available to the yangcli program.

When the server module capabilities are analyzed by the yangcli client, the entire YANG module search path is checked for the specific module advertised in the capability. All the modules are partially parsed to check the actual namespace and revision date values. The following fields must exactly match in order for yangcli to use a local YANG module, if --autoload=true.

module name
module revision date (if any)
module namespace

If the namespace URI value is different, it indicates that there is either a bug in one of the conflicting YANG modules, or that two different naming authorities picked the same module name. In this case, a warning will be generated during session initialization.

Any data returned from the server for YANG modules not currently available will be treated as a YANG 'anyxml' node, instead of the (unknown) YANG data type.

If the module contains YANG features that are not advertised in the <capabilities> exchange, then those data definitions will not be available (by default) for use in yangcli commands.

If the module contains an object with a 'when' statement, and the 'when' XPath expression evaluates to 'false', then that data definition will not be available (by default) for use in yangcli commands.

The help command will be tailored to the modules, capabilities, features, and module deviations reported by the server in <capability> exchange.

Retrieving Data

There are 6 commands available to retrieve generic data (i.e., an arbitrary subset of an entire NETCONF database):

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| command	description
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| get	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| raw NETCONF <get> operation
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| get-config	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| raw NETCONF <get-config> operation
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| sget	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| high-level subtree filter, using the <get> protocol operation
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| sget-config	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| high-level subtree filter, using the <get-config> protocol operation
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| xget	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| high-level XPath filter, using the <get> protocol operation
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| xget-config	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| high-level XPath filter, using the <get-config> protocol operation

All the high-level retrieval operations support the $$with-defaults system variable. The <with-defaults> parameter will be added the the NETCONF PDU if this variable is set to a value other than 'none' (the default). This system variable will be used as the default if not entered directly.

sget /system --with-defaults=$$with-defaults

This parameter can also be specified directly, each time the command is used.

xget-config //ifMtu --with-defaults=trim

The $$bad-data system variable is used to control how invalid operations and data are sent to the server. The xget and xget-config commands are affected by this parameter. If the :xpath capability was not advertised by the server when the session started, an error or warning may occur if these commands are used.

If any data is received that yangcli does not understand, then a warning message will be printed and the data will be treated as if it was defined with the YANG 'anyxml' data type.

Modifying Data

The following commands are available to modify generic data (i.e., an arbitrary subset of an entire NETCONF database):

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| command	description
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| commit	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| raw NETCONF <commit> operation
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| create	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| high-level <edit-config> operation, with nc:operation='create'
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| delete	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| high-level <edit-config> operation, with nc:operation='delete'
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| delete-config	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| raw NETCONF <delete-config> operation
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| discard-changes	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| raw NETCONF <discard-changes> operation
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| edit-config	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| raw NETCONF <edit-config> operation
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| fill	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| fill a variable for re-use in other operations
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| insert	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| high-level <edit-config> operation, with YANG insert operation extensions
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| lock	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| lock a NETCONF database
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| merge	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| high-level <edit-config> operation, with nc:operation='merge'
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| replace	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| high-level <edit-config> operation, with nc:operation='replace'
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| save	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| High level save operation, depending on the default target (candidate or running)
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| unlock	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| unlock a NETCONF database

All the high-level editing operations use the --target parameter reported by the server when the session started up. If the server did not report the :candidate or :writable-running capabilities, then there will be no writable target, and an error will occur if these commands are entered.

All the high-level editing operations support the $$default-operation system variable. The <default-operation> parameter will be added the the NETCONF <edit-config> PDU if this variable is set to a value other than 'not-used'. The default is the enumeration 'none', which means do not use any default operation, and only use the explicit nc:operation attribute.

All the high-level editing operations support the $$test-option system variable. The <test-option> parameter will be added the the NETCONF <edit-config> PDU if this variable is set to a value other than 'none' (the default). This system variable will be used as the default if not entered directly.

replace /interfaces/interface[name='eth0']/ifMtu \
    --test-option=$$test-option \
    --value=$newvalue

This parameter can also be specified directly, each time the command is used.

$newvalue = 1518

replace /interfaces/interface[name='eth0']/ifMtu \
    --test-option=test-only \
    --value=$newvalue

All the high-level retrieval operations support the $$error-option system variable. The <error-option> parameter will be added the the NETCONF <edit-config> PDU if this variable is set to a value other than 'none' (the default). This system variable will be used as the default if not entered directly.

replace /interfaces/interface[name='eth0']/ifMtu \\
    --error-option=$$error-option \
    --value=1518

This parameter can also be specified directly, each time the command is used.

replace /interfaces/interface[name='eth0']/ifMtu \
    --error-option=rollback-on-error \
    --value=1518

The high level save command is mapped to other commands, depending on the capabilities reported by the server.

save command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| capabilities	real command(s)
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| :candidate	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| commit
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| :writable-running	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| <none>
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| :startup	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| copy-config --source=running \ --target=startup

Using Notifications

The create-subscription command is used to start receiving notifications.

The netconfd server will include a <sequence-id> element in any notification that is saved in the replay buffer. This unsigned integer can be used to help debug notification filters (i.e., if non-consecutive <sequence-id> values are received, then the notification was filtered, or dropped due to access control policy).

If any replay notifications are desired, then the --startTime parameter must be included. At the end of the stored notifications, the server will send the <replayComplete> event. This notification type is not saved, and will not be found in the server replay buffer, if replay is supported by the server. The netconfd server will not include a <sequence-id> element in this notification type.

If the notification subscription should stop at a certain time, then the --stopTime parameter must be included. At the end of the stored notifications, the server will send the <replayComplete> event, followed by the <notificationComplete> event. . This notification type is not saved, and will not be found in the server replay buffer, if replay is supported by the server. The netconfd server will not include a <sequence-id> element in this notification type.

Notifications are printed to the log, using the current $$display-mode system variable setting, when and if they are received.

Notifications are also logged. Use the eventlog command to access the notifications stored in the event log.

Configuration Parameters That Affect Sessions

The --server, --user, and --password configuration parameters can be used to start a NETCONF session automatically at startup time. The connect command will only be attempted at startup time if the --server parameter is present.

If all 3 of these parameters are present at startup time, then no interactive prompting for additional optional parameters will be done. Instead the connect command will be invoked right away.

During normal operation, the --optional configuration parameter, or the $$optional system variable, can be used to control interactive prompting for optional parameters.

The --server parameter is saved in the $$server system variable, which can be overwritten at any time. If set, this will be used as the initial default value for the --server parameter in the connect command.

The --fixorder configuration parameter can be used to control XML PDU ordering. If set to 'true', then the PDU will be reordered (if needed),to use the canonical order, according to the YANG specification. If 'false', the order parameters are entered at the command line will be their NETCONF PDU order as well. The default is 'true'. To send the server incorrectly ordered data structures on purposes, set this parameter to 'false'.

The --user parameter is saved in the $$user system variable, which can be overwritten at any time. If set, this will be used as the initial default value for the --user parameter in the connect command.

The --with-defaults configuration parameter, or the $$with-defaults system variable, can be used to set the default value for the 'with-defaults' parameter extension for the NETCONF get, get-config, and copy-config protocol operations. The default is 'none'.

The --error-option configuration parameter, or the $$error-option system parameter, can be used to set the default value for the --error-option parameter for the NETCONF edit-config protocol operation. The default is 'none'.

The --test-option configuration parameter, or the $$test-option system parameter, can be used to set the default value for the --test-option parameter for the NETCONF edit-config protocol operation. The default is 'none'.

The --bad-data configuration parameter, or the $$bad-data system variable, can be used to control how yangcli handles parameter values that are known to be invalid, or usage of optional protocol operations that the current session does not support. The default value is 'check'. To use yangcli in a testing mode to send the server incorrect data on purpose, set this parameter to 'warn' or 'ignore'.

Trouble-shooting NETCONF Session Problems

If the NETCONF session does not start for any reason, one or more error messages will be printed, and the prompt will indicate 'idle' mode. This section assumes that the server is netconfd, and these debugging steps may not apply to all NETCONF agents.

If the NETCONF session does not start:

make sure the server is reachable
- try to 'ping' the server and see if it responds
make sure the SSH server is responding
- try to login in to the server using normal SSH login on port 22
make sure a firewall is not blocking TCP port 830
- try to connect to the NETCONF server using the --port=22 option
make sure the netconf-subsystem is configured correctly in

/etc/ssh/sshd_configthere should be the proper configuration commands for NETCONF to work. For example, the netconfd server configuration might look like this:

    Port 22
    Port 830
    Subsystem    netconf    /usr/sbin/netconf-subsystem

make sure the netconfd server is running. Use the unix 'ps'

command, or check the netconfd log file, to make sure it is running.

    ps -alx | grep netconf
    (look for 1 'netconfd and N 'netconf-subsystem' -- 1 for
     each active session)

make sure the user name is correct
- This must be a valid user name on the system

make sure the password is correct
- This must be the valid password (in /etc/passwd or /etc/shadow) for

the specified user name

If the NETCONF session stops responding:

make sure the server is still reachable
- try to 'ping' the server and see if it responds
make sure the SSH server is still responding
- try to login in to the server using normal SSH login on port 22

If the NETCONF server is not accepting a certain command:

make sure the command (or parameters used in the command) is actually

supported by the server.

- There may be features, when statements, or deviation statements that

indicate the server does not support the command or one or more of its parameters.

make sure that access control configured on the server is not blocking

the command. The error-tag should be 'access-denied' in this case.

If the NETCONF server is not returning the expected data in a <get> or <get-config> protocol operation::

Make sure all the parameters are supported by the server
- the :xpath capability must be advertised by the server to use the 'select' attribute in the <get> or <get-config> operations
- the :with-defaults capability must be advertised by the server to use the <with-defaults> parameter
if using a filter, try to retrieve the data without a filter and see

if it is there

make sure that access control configured on the server is not blocking

the retrieval. There will not be any error reported in this case. The server will simply skip over any unauthorized data, and leave it out of the <rpc-reply>.

set the logging level to debug2 or higher, and look closely at the

PDUs being sent to the server. Set the display mode to a value other than 'plain' to make sure the correct namespaces are being used in the request.

If an <edit-config> operation is failing unexpectedly:

make sure that access control configured on the server is not blocking

the request. The error-tag should be 'access-denied' in this case.

make sure an unsupported parameter or parameter value is not used
- <test-option> is not supported unless the :validate capability is advertised by the server
- <error-option> = 'rollback-on-error' is not supported unless the :rollback-on-error capability is advertised by the

server

if the request contains an edit to a nested data structure, make sure

the parent data structure(s) are in place as expected. The <default-operation> parameter is set to 'none' in the high level editing operations, so any data 'above' the edited data must already exist.

set the logging level to debug2 or higher, and look closely at the

PDUs being sent to the server. Set the display mode to a value other than 'plain' to make sure the correct namespaces are being used in the request.

Command Reference

This section describes all the yangcli local and remote commands built-in when using the netconfd server.

There may be more or less commands available, depending on the YANG modules actually loaded at the time.

The specific NETCONF capabilities needed are listed for each remote command. No capabilities are ever needed for a local command.

It is possible that other servers will support protocol operations that netconfd does not support. If yangcli has the YANG file available for the module, then it can be managed with the high level commands. Low-level commands can still be used with external data (e.g., @mydatafile.xml).

Any YANG rpc statement can be used as a remote yangcli command. Refer to the server vendor documentation for details on the protocol operations, database contents, and notification definitions that they support.

alias

The alias command is used to set or display a specific command alias, or display all command aliases if no parameter is given. It is similar to the 'alias' command in unix shells such as 'bash'.

There are 3 forms of the alias command:

alias: display all command aliases in memory
alias <name>: display the command alias with

the specified name

alias <name>=<value>: set the command alias

with the specified name to the string value

Use the unset command to delete an alias.

alias command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	local
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| var
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| status
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yangcli.yang

Command Parameters:

var
- type: string
- usage: optional
- default: none
- The 'var' string must contain either a valid alias name or a

string setting an alias. There cannot be any whitespace between the '=' and other characters when setting an alias. The alias value must be quoted if it contains whitespace.

- - A double-quoted string can contain single quotes: alias get-eth0=”xget /interfaces/interface[name='eth0']”
  - A single-quoted string can contain double quotes: alias get-eth0='xget /interfaces/interface[name=”eth0”]'
  - An unquoted string can be used if the <value> does not contain any whitespace: alias gc=get-config

Positive Response:

If no parameter given:
- The current list of command aliases is displayed.
If a <name> parameter given:
- The specified alias is displayed.
If a <name>=<value> parameter is given:
- 'Updated alias foo' if alias foo already exists.
- 'Added alias foo' if this is a new alias

Negative Response:

If no parameter given:
- Not applicable
If a <name> parameter given:
- Error: alias 'foo' not found
If a <name>=<value> parameter is given:
- Error message printed if value is invalid

Usage:

    yangcli> alias get-running=”get-config --source=running”

    Added alias 'get-running'

    yangcli>

aliases

The aliases command is used to load, save, or clear the command aliases, or display all command aliases if no parameter is given.

There are 4 forms of the aliases command:

aliases [show]: display all command aliases in

memory

aliases clear: clear all command aliases in memory
aliases save [alias-filespec]: save the command

aliases in memory in an '.aliases' file.

aliases load [alias-filespec]: load the command

aliases from an '.aliases' file into memory.

aliases command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	local
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| status
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yangcli.yang

Command Parameters:

alias-action
- type: choice
- usage: optional
- default: show
- clear
  - Delete all aliases from memory. This will not affect the aliases

file until the 'aliases save' command is used, or the program exits and the –autoaliases parameter is set to 'true'.

- load [alias-filespec]
  - Load an aliases file into memory. If the 'alias-filespec' parameter

is not given, then the default aliases file ($HOME/.yuma/.yangcli_aliases) will be used.

- save [alias-filespec]
  - Save the command aliases into memory to an alias file. If the

'alias-filespec' parameter is not given, then the default aliases file ($HOME/.yuma/.yangcli_aliases) will be used.

- show
  - Displays all aliases in memory.

Positive Response:

show:

- The current list of command aliases is displayed.
clear, load, save:
- A status message is displayed.

Negative Response:

An error message is printed if any error occurs.

Usage:

    yangcli> aliases save

    Saved aliases OK to '~/.yuma/.yangcli_aliases'

    yangcli>

cd

The cd command is used to change the current working directory.

cd command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	local
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| dir
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| status
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yangcli.yang

Command Parameters:

dir
- type: string
- usage: mandatory
- default: none
- The 'dir' string must contain a valid directory specification

Positive Response:

the new current working directory is printed

Negative Response:

an error message will be printed describing the error

Usage:

    yangcli> cd ~/modules

    Current working directory is /home/andy/modules

    yangcli> cd --dir=$YUMA_HOME

    Current working directory is /home/andy/swdev/yuma/trunk/netconf

    yangcli>

close-session

The close-session command is used to terminate the current NETCONF session. A NETCONF server should always accept this command if it is valid, and not reject it due to access control enforcement or if the server is in notification delivery mode.

close-session command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	remote
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| status
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yuma-netconf.yang

Command Parameters:

none

Positive Response:

the session is terminated and the command prompt is changed to

indicate idle mode

Negative Response:

an <rpc-error> message will be printed describing the error

Usage:

    yangcli andy@myserver> close-session

    RPC OK Reply 2 for session 10:

    yangcli>

Reference:

RFC 4741, section 7.8

commit

The commit command is used to save the edits in the <candidate> database into the <running> database. If there are no edits it will have no effect.

commit command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	remote
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 2
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| status
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yuma-netconf.yang
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Capabilities needed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| :candidate
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Capabilities optional:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| :confirmed-commit

Command Parameters:

confirmed
- type: empty
- usage: optional
- default: none
- capabilities needed: :confirmed-commit
- This parameter requests a confirmed commit procedure. The server will

expect another commit command before the confirm-timeout time period expires.

confirm-timeout
- type: uint32 (range: 1 .. max)
- usage: optional
- default: 600 seconds

- capabilities needed: :confirmed-commit

- This is the number of seconds to request before the timeout.The

'confirmed' leaf must also be present for this parameter to have any affect.

persist
- type: string
- usage: optional
- persist ID used to start or extend the confirmed commit procedure
persist-id
- type: string
- usage: optional
- persist ID used to conform a previously started the confirmed commit

procedure

Positive Response:

the session is terminated and the command prompt is changed to

indicate idle mode

Negative Response:

an <rpc-error> message will be printed describing the error

Usage:

    yangcli andy@myserver> commit

    RPC OK Reply 5 for session 10:

    yangcli andy@myserver>

Reference:

RFC 4741, section 8.3.4

connect

The connect command is used to start a session with a NETCONF server.

If there already is a NETCONF session active, then an error message will be printed and the command will not be executed.

connect command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	remote
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| server
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 3
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 8
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| status
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yangcli.yang

Command Parameters:

server
- type: inet:ip-address (string containing IP address or DNS name
- usage: mandatory
- default: previous server used, if any, will be presented as the

default, but not used automatically

- This parameter specifies the server address for the session.

password
- type: string (ncx:password)
- usage: mandatory
- default: previous password used, if any, will be presented as the

default, but not used automatically

- This parameter specifies the password string to use to establish the

session. It will not be echoed in parameter mode or saved in the command history buffer.

port
- type: uint16
- usage: optional
- default: 830
- This parameter specifies the TCP port number that should be used for

the session.

timeout
- type: uint32 (0 = no timeout, otherwise the number of seconds to

wait)

- usage: optional
- default: set to the $$timeout system variable, default 30

seconds

- This parameter specifies the number of seconds to wait for a response

from the server before giving up. The session will not be dropped if a remote command times out, but any late response will be dropped. A value of zero means no timeout should be used, and yangcli will wait forever for a response.

user
- type: string
- usage: mandatory
- default: previous user name used, if any, will be presented as the

default, but not used automatically

- This parameter specifies the user name to use for the session. This

must be a valid user name on the NETCONF server.

protocols
- type: bits (netconf1.0 netconf1.1)
- usage: optional
- default: --protocols configuration parameter setting
- Specifies which NETCONF protocol versions to enable. Overrides

–protocols configuration parameter.

private-key
- type: string
- usage: optional
- default: --private-key configuration parameter setting
- Specifies the SSH private key file to use. Overrides –private-key

configuration parameter.

public-key
- type: string
- usage: optional
- default: --public-key configuration parameter setting
- Specifies the SSH public key file to use. Overrides –public-key

configuration parameter.

Positive Response:

the session is started and the prompt changes to include the

'user@server' string.

Negative Response:

One or more error messages will be printed. Refer to the section on

trouble-shooting NETCONF Session problems for more details.

Usage:

    yangcli> connect myserver user=andy

password=yangrocks

    <startup screen printed>

    yangcli andy@myserver>

copy-config

The copy-config command is used to copy one entire NETCONF database to another location.

Not all possible parameter combinations will be supported by every server. In fact, the NETCONF protocol does not require any parameters to be supported unless the :startup or :url capabilities is supported by the server.

If the server supports the :startup capability, then it must support:

yangcli andy@myserver> copy-config

source=running target=startup

This is the standard way to save a snapshot of the current running configuration in non-volatile storage, if the server has a separate startup database. If not, the server will automatically save any changes to the running configuration to non-volatile storage.

copy-config command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	remote
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 2
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 3
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| status
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yuma-netconf.yang
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Capabilities needed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Capabilities optional:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| :candidate:startup:url:with-defaults

Command Parameters:

source
- type: container with 1 of N choice of leafs
- usage: mandatory
- default: none
- This parameter specifies the name of the source database for the copy

operation.

- container contents: 1 of N:
  - candidate
    - type: empty
    - capabilities needed: :candidate
  - running
    - type: empty
    - capabilities needed: none
  - startup
    - type: empty
    - capabilities needed: startup
  - config:
    - type: container (in-line configuration data)
    - capabilities needed: none
  - url
    - type: yang:uri
    - capabilities needed: :url, and the scheme used in the URL must be

specified in the :url capability 'schemes' parameter

- - - To enter this parameter, the interactive mode must be used. The

shorthand mode (source=url) cannot be used, since this parameter contains a string.

target
- type: container with 1 of N choice of leafs
- usage: mandatory
- default: none
- This parameter specifies the name of the target database for the copy

operation.

- container contents: 1 of N:
  - candidate
    - type: empty
    - capabilities needed: :candidate
  - running
    - type: empty
    - capabilities needed: :writable-running (still optional to

implement)

- - - - netconfd does not support this mode
  - startup
    - type: empty
    - capabilities needed: startup
  - url
    - type: yang:uri
    - capabilities needed: :url, and the scheme used in the URL must be

specified in the :url capability 'schemes' parameter.

- - - To enter this parameter, the interactive mode must be used. The

shorthand mode (target=url) cannot be used, since this parameter contains a string.

with-defaults
- type: enumeration (none report-all report-all-tagged trim explicit)
- usage: optional
- default: none
- capabilities needed: with-defaults
- This parameter controls how nodes containing only default values are

copied to the target database.

Positive Response:

the server returns <ok/>

Negative Response:

An error message will be printed if errors are detected locally.
An <rpc-error> message will be printed if the server detected an error.

Usage:

    yangcli andy@myserver> copy-config source=candidate
    
    Enter a number of the selected case statement:

      1: case candidate: 
           leaf candidate 
      2: case running: 
           leaf running 
      3: case startup: 
           leaf startup 
      4: case url: 
           leaf url

    Enter choice number [1 - 4]: 
    yangcli andy@myserver:copy-config> 4

    Filling optional case /copy-config/input/target/config-source/url
    Enter string value for leaf <url>:
    yangcli andy@myserver:copy-config> [smb://configs/myconfig.xml

file://configs/myconfig.xml]

    RPC OK Reply 12 for session 10:
    yangcli andy@myserver>

Reference:

RFC 4741, section 7.3

create

The create command is a high-level <edit-config> operation. It is used to create some new nodes in the default target database.

A target node is specified (in 1 of 2 ways), and then the data structure is filled in. Only mandatory nodes will be filled in unless the $$optional system variable is set to 'true'.

Refer to the fill command for more details on interactive mode data structure completion.

create command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	remote
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| target
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 5
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| status
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yangcli.yang
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Capabilities needed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| :candidate or :writable-running

Command Parameters:

choice 'from' (not entered)
- type: choice of case 'varref' or case 'from-cli'
- usage: mandatory
- default: none
- This parameter specifies the where yangcli should get the data

from, for the create operation. It is either a user variable or from interactive input at the command line.

- - varref
    - type: string
    - usage: mandatory
    - default: none
    - This parameter specifies the name of the user variable to use for

the target of the create operation. The parameter must exist (e.g., created with the fill command) or an error message will be printed.

- - case from-cli (not entered)
    - target
      - type: string
      - usage: mandatory
      - default: none
      - This parameter specifies the database target node of the create

operation. This is an ncx:schema-instance string, so any instance identifier, or absolute path expression, or something in between, is accepted.

- - - urltarget
      - type: string
      - usage: optional
      - default: none
      - This parameter specifies the database target node of the create

operation. This is an UrlPath string.

- - - optional
      - type: empty
      - usage: optional
      - default: controlled by $$optional system variable
      - This parameter controls whether optional nodes within the target

will be filled in. It can be used to override the $$optional system variable, when it is set to 'false'.

- - - value
      - type: anyxml
      - usage: mandatory
      - default: none
      - This parameter specifies the value that should be used for the

contents of the target parameter. If it is entered, then the interactive mode prompting for missing parameters will be skipped, if this parameter is complete (or all mandatory nodes present if the $$optional system variable is 'false'). For example, if the target is a leaf, then specifying this parameter will always cause the interactive prompt mode to be skipped.

timeout
- type: uint32 (0 = no timeout, otherwise the number of seconds to

wait)

- usage: optional
- default: set to the $$timeout system variable, default 30

seconds

- This parameter specifies the number of seconds to wait for a response

from the server before giving up. The session will not be dropped if a remote command times out, but any late response will be dropped. A value of zero means no timeout should be used, and yangcli will wait forever for a response.

System Variables:

$$default-operation
- The <default-operation> parameter for the <edit-config> operation will be derived from this variable.

$$error-option
- The <error-option> parameter for the <edit-config> operation will be derived from this variable
$$test-option
- The <test-option> parameter for the <edit-config> operation will be derived from this variable

Positive Response:

the server returns <ok/>

Negative Response:

An error message will be printed if errors are detected locally.
An <rpc-error> message will be printed if the server detected an error.

Usage:

    yangcli andy@myserver> create varref=myvar

    RPC OK Reply 10 for session 10:

    yangcli andy@myserver> create

/nacm/rules/data-rule \

    (user will be prompted to fill in the data-rule contents)

    RPC OK Reply 11 for session 10:

    yangcli andy@myserver> create \
        target=/nacm/rules/data-rule[name='test
rule']/comment \
        value=”this test rule is temporary. Do not remove!”
    (no user prompting; <edit-config> request sent right
away)

    RPC OK Reply 12 for session 10:
    yangcli andy@myserver>

Reference:

RFC 4741, section 7.2

create-subscription

The create-subscription command is used to start receiving notifications from the server.

The :notification capability must be supported by the server to use this command.

Unless the :interleave capability is also supported by the server, then only the close-session command can be used while notifications are being delivered.

create-subscription command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	remote
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 4
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| status
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| notifications.yang
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Capabilities needed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| :notification
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Capabilities optional:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| :interleave

Command Parameters:

stream
- type: string
- usage: optional
- default: 'NETCONF'
- This parameter specifies the name of the notification stream for this

subscription request. Only the 'NETCONF' stream is mandatory to implement. Any other stream contains vendor-specific content, and may not be fully supported, depending on the stream encoding.

filter
- type: anyxml (same as the <get> or <get-config> filter parameter)
- usage: optional
- default: none
- This parameter specifies a boolean filter that should be applied to

the stream. This is the same format as the standard <filter> element in RFC 4741, except that instead of creating a subset of the database for an <rpc-reply> PDU, the filter is used as a boolean test to send or drop each notification delivered from the server.

- - If any nodes are left in the 'test response', the server will send

the entire notification.

- - If the result is empty after the filter is applied to the “test

response”, then the server will not send the notification at all.

- - It is possible that access control will either cause the a

notification to be dropped entirely, or may be pruned and still delivered. The standard is not clear on this topic. The netconfd server will prune any unauthorized payload from an eventType, but if the <eventType> itself is unauthorized, the entire notification will be dropped.

startTime
- type: yang:date-and-time
- usage: optional
- default: none
- This parameter causes any matching replay notifications to be

delivered by the server, if notification replay is supported by the server. A notification will match if its <eventTime> value is greater or equal to the value of this parameter.

- After all the replay notifications are delivered, the server will send a <replayComplete> eventType, indicating there are no more replay notifications that match the subscription request.
stopTime
- type: yang:date-and-time
- usage: optional (not allowed unless startTime is also present)
- default: none
- This parameter causes any matching replay notifications to be

delivered by the server, if notification replay is supported by the server. A notification will match if its <eventTime> value is less than the value of this parameter.

- - This parameter must be greater than the startTime parameter,

or an error will be returned by the server.

- - If this parameter is used, then the entire subscription will stop

after this specified time, even if it is in the future. The <notificationComplete> eventType will be sent by the server when this event occurs.

- - If this parameter is not used (but startTime is used), then the server will continue to deliver 'live' notifications after the <replayComplete> eventType is sent by the server.

Positive Response:

the server returns <ok/>

Negative Response:

An error message will be printed if errors are detected locally.
An <rpc-error> message will be printed if the server detected an error.

Usage:

    yangcli andy@myserver> create-subscription

    RPC OK Reply 13 for session 10:

    yangcli andy@myserver>

create-subscription \

        startTime=2009-01-01T00:00:00Z

    RPC OK Reply 14 for session 10:

    yangcli andy@myserver>

Reference:

RFC 5277, section 2.1.1

delete

The delete command is a high-level <edit-config> operation. It is used to delete an existing subtree in the default target database.

A target node is specified, and then any missing key leafs (if any) within the data structure are filled in. If the target is a leaf-list, then the user will be prompted for the value of the leaf-list node to be deleted.

Refer to the fill command for more details on interactive mode data structure completion.

delete command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	remote
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| target
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| status
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yangcli.yang
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Capabilities needed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| :candidate or :writable-running

Command Parameters:

target
- type: string
- usage: optional (urltarget or target must be present)
- default: none
- This parameter specifies the database target node of the delete

operation. This is an ncx:schema-instance string, so any instance identifier, or absolute path expression, or something in between, is accepted.

urltarget
- - - - type: string
      - usage: optional
      - default: none
      - This parameter specifies the database target node of the delete

operation. This is an UrlPath string.

System Variables:

$$default-operation
- The <default-operation> parameter for the <edit-config> operation will be derived from this variable.

$$error-option
- The <error-option> parameter for the <edit-config> operation will be derived from this variable
$$optional
- Controls whether optional descendant nodes will be filled into the

target parameter contents

$$test-option
- The <test-option> parameter for the <edit-config> operation will be derived from this variable

Positive Response:

the server returns <ok/>

Negative Response:

An error message will be printed if errors are detected locally.
An <rpc-error> message will be printed if the server detected an error.

Usage:

    yangcli andy@myserver> delete

/nacm/rules/data-rule \

    (user will be prompted to fill in the data-rule 'name' key leaf)

    RPC OK Reply 15 for session 10:

    yangcli andy@myserver> delete \
        target=/nacm/rules/data-rule[name='test
rule']/comment
    (no user prompting; <edit-config> request sent right
away)

    RPC OK Reply 16 for session 10:
    yangcli

Reference:

RFC 4741, section 7.2

delete-config

The delete-config command is used to delete an entire NETCONF database.

Not all possible target parameter values will be supported by every server. In fact, the NETCONF protocol does not require that any database be supported by this operation.

If the server supports the :url capability, then it may support deletion of local file databases in this manner.:

delete-config command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	remote
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| status
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yuma-netconf.yang
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Capabilities needed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Capabilities optional:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| :candidate:startup:url

Command Parameters:

target
- type: container with 1 of N choice of leafs
- usage: mandatory
- default: none
- This parameter specifies the name of the target database for the

delete operation.

- container contents: 1 of N:
  - startup
    - type: empty
    - capabilities needed: startup
    - a server may support this target
  - url
    - type: yang:uri
    - capabilities needed: :url, and the scheme used in the URL must be

specified in the :url capability 'schemes' parameter.

- - - To enter this parameter, the interactive mode must be used. The

shorthand mode (target=url) cannot be used, since this parameter contains a string.

- - - a server may support this parameter

Positive Response:

the server returns <ok/>

Negative Response:

An error message will be printed if errors are detected locally.
An <rpc-error> message will be printed if the server detected an error.

Usage:

    yangcli andy@myserver> delete-config target=startup

    RPC OK Reply 17 for session 10:

    yangcli andy@myserver>

Reference:

RFC 4741, section 7.4

discard-changes

The discard-changes command is used to delete any edits that exist in the <candidate> database, on the NETCONF server. The server will only accept this command if the :candidate capability is supported. If the <candidate> database is locked by another session, then this request will fail with an 'in-use' error.

discard-changes command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	remote
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| status
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yuma-netconf.yang
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Capabilities needed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| :candidate

Command Parameters: none

Positive Response:

the server returns <ok/>

Negative Response:

An error message will be printed if errors are detected locally.
An <rpc-error> message will be printed if the server detected an error.

Usage:

    yangcli andy@myserver> discard-changes

    RPC OK Reply 18 for session 10:

    yangcli andy@myserver>

Reference:

RFC 4741, section 8.3.4.2

edit-config

The edit-config command allows a subset of a NETCONF database on the server to be changed.

If the server supports the :url capability, then it may support editing of local file databases.

If the server supports the :candidate capability, then it will allow edits to the <candidate> database.

If the server supports the :writable-running capability, it will support edits to the <running> database.

It is not likely that a server will support the <candidate> and <running> database as targets at the same time, since changes to the <running> configuration would not be reflected in the <candidate> database, while it was being edited by a different session.

edit-config command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	remote
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 2
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 5
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| status
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yuma-netconf.yang
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Capabilities needed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| :candidate or :writable-running
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Capabilities optional:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| :url:rollback-on-error:validate

Command Parameters:

default-operation
- type: enumeration (merge replace none)
- usage: optional
- default: merge
- This parameter specifies which edit operation will be in effect at

the start of the operation, before any nc:operation attribute is found.

- - The high-level edit operations provided by yangcli will set

this parameter to 'none'. This is the safest value, since only subtrees that have an explicit nc:operation attribute in effect can possibly be altered by the command.

- - If the value is 'merge', then any missing nodes in the database will

be automatically created as needed.

- - If the value is 'replace', then the target database will be pruned

to match the edits, as needed. Only the data from the config parameter will remain if this value is used. (Use with extreme caution).

error-option
- type: enumeration (stop-on-error continue-on-error rollback-on-error
- usage: optional
- default: stop-on-error
- This parameter specifies what the server should do when an error is

encountered.

- - The rollback-on-error value is only allowed if the

:rollback-on-error capability is supported by the server.

- - The standard is not clear what continue-on-error really means. It is

suggested that this value not be used. It is possible that the server will validate all input parameters before making any changes, no matter how this parameter is set.

choice edit-content (not entered)
- config
  - type: anyxml
  - usage: mandatory
  - default: none
  - This parameter specifies the subset of the database that should be

changed. This is the most common way to edit a NETCONF server database, since it is mandatory to support by all agents.

- url
  - type: yang:uri
  - capabilities needed: :url, and the scheme used in the URL must

be specified in the :url capability 'schemes' parameter.

- - To enter this parameter, the interactive mode must be used. The

shorthand mode (target=url) cannot be used, since this parameter contains a string.

target
- type: container with 1 of N choice of leafs
- usage: mandatory
- default: none
- This parameter specifies the name of the target database for the edit

operation.

- container contents: choice: 1 of N:
  - candidate
    - type: empty
    - capabilities needed: :candidate
  - running
    - type: empty
    - capabilities needed: :writable-running
test-option
- type: enumeration (test-then-set set test-only)
- usage: optional
- default: set
- This parameter specifies how the server should test the

edit-content parameter before using it.

- - If the value is 'set' (normal case), the server will apply

validation tests as needed for the individual data structures being edited

- - The value 'test-then-set' is only allowed if the :validate

capability is supported by the server. The server will test if the entire database will be valid after the edits are made, before making any changes to the candidate configuration.

- - - This mode is very resource intensive. Set this parameter to 'set'

for better performance, and run the validation tests manually with the validate command.

- - The value 'test-only' is not supported by all agents. It will be in

the next version of the NETCONF protocol, but is non-standard at this time.

- - - Use this value to check if a specific edit should succeed or not,

allowing errors to be corrected before altering the database for real.

Positive Response:

the server returns <ok/>

Negative Response:

An error message will be printed if errors are detected locally.
An <rpc-error> message will be printed if the server detected an error.

Usage:

    yangcli andy@myserver> edit-config target=candidate \
        default-operation=merge \
        test-option=test \
        error-option=stop-on-error \
        config=@myconfig.xml

    RPC OK Reply 19 for session 10:

    yangcli andy@myserver>

Reference:

RFC 4741, section 7.2

elif

The elif command is used to define a conditional command block after an if command.

This command must be entered within the same script as the if command, when used within a script. It can be used zero or more times within an if command sequence.

The expr parameter is used to specify the XPath expression to test if the elif conditional block is true or false. A false block will be skipped and a true block will be executed. The command prompt will contain the string '[F]' while inside a false conditional block in interactive mode. This expression string should be entered with quotes to avoid misinterpreting any whitespace or special characters.

The docroot parameter (if present) specifies the XML document that the 'expr' parameter should be evaluated against. This is optional, since only XPath path expressions need to refer to a document.

Even if the 'expr' expression is true, the conditional block will only be executed if no conditional block in the if command sequence has already been executed.

if command

....

[elif command]

....

[elif-command]

...

[else command]

...

end command

elif command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	local
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| expr
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 2
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| status
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yangcli.yang

Command Parameters:

expr
- type: XPath expression string
- usage: mandatory
- default: none
- This parameter specifies the XPath expression to determine if the

following commands are within a true or false conditional block.

docroot
- type: anyxml
- usage: optional (typically a variable reference is used)
- default: none
- This parameter specifies the XML document that should be used if the

expr XPath expression references any path nodes.

Positive Response:

the server returns <ok/>

Negative Response:

An error message will be printed if errors are detected locally.
- elif without a previous if command will cause an error
- elif following an 'else' command will cause an error
- invalid XPath expression or invalid docroot reference will cause an

error

Usage:

    yangcli andy@myserver> elif expr='$x > 4'

    yangcli andy@myserver>

else

The else command is used to define a final conditional command block after an if command.

This command must be entered within the same script as the if command, when used within a script. It can be used zero or one time within an if command sequence.

The conditional command block following the else command will only be executed if no conditional block has already been executed in the same if command sequence.

if command

....

[elif command]

....

[elif-command]

...

[else command]

...

end command

else command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	local
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| status
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yangcli.yang

Command Parameters: none

Positive Response:

the server returns <ok/>

Negative Response:

An error message will be printed if errors are detected locally.
- else without a previous if command will cause an error

Usage:

    yangcli andy@myserver> else

    yangcli andy@myserver>

end

The end command is used to terminate a conditional command block after an if command block, or after a 'while' command.

This command must be entered within the same script as the if or while command, when used within a script.

if command

....

[elif command]

....

[elif-command]

...

[else command]

...

end command

while command

....

end command

end command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	local
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| status
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yangcli.yang

Command Parameters: none

Positive Response:

the server returns <ok/>

Negative Response:

An error message will be printed if errors are detected locally.
- else without a previous if command will cause an error

Usage:

    yangcli andy@myserver> end

    yangcli andy@myserver>

eval

The eval command is used to evaluate an XPath expression..

The expr parameter is used to specify the XPath expression to evaluate. This expression string should be entered with quotes to avoid misinterpreting any whitespace or special characters.

The docroot parameter (if present) specifies the XML document that the 'expr' parameter should be evaluated against. This is optional, since only XPath path expressions need to refer to a document.

eval command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	local
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| expr
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 2
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| data
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yangcli.yang

Command Parameters:

expr
- type: XPath expression string
- usage: mandatory
- default: none
- This parameter specifies the XPath expression to determine if the

following commands are within a true or false conditional block.

docroot
- type: anyxml
- usage: optional (typically a variable reference is used)
- default: none
- This parameter specifies the XML document that should be used if the

expr XPath expression references any path nodes.

Positive Response:

the server returns <ok/>

Negative Response:

An error message will be printed if errors are detected locally.
- elif without a previous if command will cause an error
- elif following an 'else' command will cause an error
- invalid XPath expression or invalid docroot reference will cause an

error

Output:

data
- type: anyxml
- This element will contain the result from the XPath expression. A

node-set result will produce a complex element return value, and all other XPath result types will produce a string return value.

Usage:

    yangcli andy@myserver> $x = eval '$x + 1'

    yangcli andy@myserver> $sysname = eval

'//sysName' docroot=$backup

eventlog

The eventlog command is used to view or clear all or part of the notification event log. This log will be empty if no well-formed notifications have been received from any server.

The eventlog show command is used to display some event log entries.

The eventlog clear command is used to delete some event log entries.

If no parameters are entered, it is the same as entering 'eventlog show=-1'.

The event log is not automatically emptied when a session terminates, in case the session was dropped unexpectedly. New entries will be appended to the event log as new sessions and/or subscriptions are started.

eventlog command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	local
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| show
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 3
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| status
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yangcli.yang

Command Parameters:

choice eventlog-action (not entered):
- type: choice of case 'show-case' or leaf 'clear'
- usage: optional
- default: show=-1 is used as the default if nothing entered
- This parameter specifies the event log action that should be

performed.

- - clear
    - type: int32 (-1 to clear all entries; 1 to max to delete N entries)
    - usage: optional
    - default: -1
    - This parameter specifies the maximum number of event log entries to

be deleted, starting from the oldest entries in the event log. The value -1 means delete all the entries. Otherwise the value must be greater than zero, and up to that many entries will be deleted.

- - case show-case (not entered)
    - choice help-mode (not entered) (default choice is 'normal')
      - brief
        type: empty
        
        usage: optional
        
        default: none
        
        This parameter specifies that brief documentation mode should be

used. The event log index, sequence ID, and <eventType> will be displayed in this mode.

- - - - normal
        type: empty
        
        usage: optional
        
        default: none
        
        This parameter specifies that normal documentation mode should be

used. The event log index, <eventTime>, sequence ID, and <eventType> will be displayed in this mode.

- - - - full
        type: empty
        
        usage: optional
        
        default: none
        
        This parameter specifies that full documentation mode should be

used. The event log index, <eventTime>, sequence ID, and <eventType> will be displayed in this mode. In addition, the entire contents of the notification PDU will be displayed, using the current $$display-mode setting.

- - - show
      - type: int32 (-1 for all, 1 to max for N entries)
      - usage: optional
      - default: -1
      - This parameter specifies the number of event log entries that

should be displayed. The value '-1' indicates all the entries should be displayed. Otherwise, the value must be greater than zero, indicating the number of entries to display.

- - - start
      - type: uint32
      - usage: optional
      - default: 0
      - This parameter specifies the start position in the event log to

start displaying entries. The first entry is number zero. Each time the event log is cleared, the numbering restarts.

System Variables:

$$display-mode
- The log entries printed when help-mode='full' are formatted according

to the current value of this system variable.

Positive Response:

the event log entries are printed or cleared as requested

Negative Response:

An error message will be printed if errors are detected.

Usage:

    yangcli andy@myserver> eventlog show=5 start=3

     [3]     [2009-07-10T02:21:10Z]
(4)    <sysSessionStart> 
     [4]     [2009-07-10T02:23:14Z]
(5)    <sysSessionEnd> 
     [5]     [2009-07-10T02:23:23Z]
(6)    <sysSessionStart> 
     [6]     [2009-07-10T02:24:52Z]
(7)    <sysConfigChange> 
     [7]     [2009-07-10T02:24:57Z]
(8)    <sysSessionEnd>

    yangcli andy@myserver>

fill

The fill command is used to create a user variable for reuse in other commands.

It is used in an assignment statement to create a variable from various sources.

If it is not used in an assignment statement, then the result will not be saved, so the command will have no effect in this case.

The value contents will mirror the subtree within the NETCONF database indicated by the target parameter. If not completely provided, then missing descendant nodes will be filled in interactively, by prompting for each missing node.

fill command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	local
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| target
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 2
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 3
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| data
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yangcli.yang

Command Parameters:

optional
- type: empty
- usage: optional
- default: controlled by $$optional system variable
- This parameter controls whether optional nodes within the target will

be filled in. It can be used to override the $$optional system variable, when it is set to 'false'.

target
- type: string
- usage: mandatory
- default: none
- This parameter specifies the database target node of the create

operation. This is an ncx:schema-instance string, so any instance identifier, or absolute path expression, or something in between, is accepted.

value
- type: anyxml
- usage: mandatory
- default: none
- This parameter specifies the content to use for the filled variable.
  - If this parameter is not entered, then the user will be prompted

interactively to fill in the target data structure.

- - If a string is entered, then the target value being filled must be a

leaf or leaf-list.

- - If a variable reference is entered, then it will be used as the

content, if the target value being filled is a leaf or a leaf-list.

- - If the target value is a complex object, then the referenced

variable must also be a complex object of the same type.

- - An error will be reported if the global or local variable does not

reference the same object type as the target parameter.

System Variables:

$$optional
- Controls whether optional descendant nodes will be filled into the

target parameter contents

Positive Response:

OK

Negative Response:

An error message will be printed if errors are detected.

Output:

data
- type: anyxml
- The data structure will mirror the requested target object.
- The variable (if any) will retain the target object name and

namespace so it can be used in other operations more easily. In the example below, the $my_interface local variable will have the module name 'interfaces' and name 'interface', when used in other commands such as create or merge.

Usage:

    yangcli> $my-interface = fill \
        target=/interfaces/interface optional
        (user will be prompted to fill in all fields
         of the <interface> element)
       OK

    yangcli>

get

The get command is used to retrieve data from the server.

get command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	remote
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 2
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| data
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yuma-netconf.yang

Command Parameters:

filter
- type: anyxml
- usage: optional
- default: none
- This parameter specifies a boolean filter that should be applied to

the stream. Any data in the <running> database (or non-config data) that does not match the filter will be left out of the <rpc-reply> response.

- - If no filter is used, the server will return the entire <running> database and all non-config data as well. This could

be a lot of data, depending on the server.

- - If the result is empty after the filter is applied to the available data, then the server will send an empty <data> element in the <rpc-reply>
  - It is possible that access control will cause the <rpc-reply> to be pruned. The netconfd server will

silently prune any unauthorized payload from the <rpc-reply>.

with-defaults
- type: enumeration (none report-all report-all-tagged trim explicit)
- usage: optional
- default: none
- capabilities needed: with-defaults
- This parameter controls how nodes containing only default values are returned in the <rpc-reply>.

Positive Response:

the server returns <data>

Negative Response:

An error message will be printed if errors are detected locally.
An <rpc-error> message will be printed if the server detected an error.

Output:

data
- type: anyxml
- This element will contain the requested data from the

<running> database, or non-config data from the server instrumentation.

Usage:

    yangcli andy@myserver> get

    RPC Data Reply 20 for session 10:

    rpc-reply {
        data {
           …. data returned by the server
        }
    }

    yangcli andy@myserver> get

filter=@myfilter.xml

    RPC Data Reply 21 for session 10:

    rpc-reply {
        data {
        }
    }

    (the previous response will occur if the filter did not
     match anything or the server access control filtered the
     entire response)

    yangcli andy@myserver>

Reference:

RFC 4741, section 7.7

get-config

The get-config command is used to retrieve configuration data from the server.

get-config command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	remote
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 3
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| data
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yuma-netconf.yang

Command Parameters:

filter
- type: anyxml
- usage: optional
- default: none
- This parameter specifies a boolean filter that should be applied to

the stream. Any data in the <running> database (or non-config data) that does not match the filter will be left out of the <rpc-reply> response.

- - If no filter is used, the server will return the entire <running> database and all non-config data as well. This could

be a lot of data, depending on the server.

- - If the result is empty after the filter is applied to the available data, then the server will send an empty <data> element in the <rpc-reply>
  - It is possible that access control will cause the <rpc-reply> to be pruned. The netconfd server will

silently prune any unauthorized payload from the <rpc-reply>.

source
- type: container with 1 of N choice of leafs
- usage: mandatory
- default: none
- This parameter specifies the name of the source database for the

retrieval operation.

- container contents: 1 of N:
  - candidate
    - type: empty
    - capabilities needed: :candidate
  - running
    - type: empty
    - capabilities needed: none
  - startup
    - type: empty
    - capabilities needed: startup
  - url
    - type: yang:uri
    - capabilities needed: :url, and the scheme used in the URL must be

specified in the :url capability 'schemes' parameter

- - - To enter this parameter, the interactive mode must be used. The

shorthand mode (source=url) cannot be used, since this parameter contains a string.

with-defaults
- type: enumeration (none report-all report-all-tagged trim explicit)
- usage: optional
- default: none
- capabilities needed: with-defaults
- This parameter controls how nodes containing only default values are returned in the <rpc-reply>.

Positive Response:

the server returns <data>

Negative Response:

An error message will be printed if errors are detected locally.
An <rpc-error> message will be printed if the server detected an error.

Output:

data
- type: anyxml
- This element will contain the requested data from the source

database.

Usage:

    yangcli andy@myserver> $my-config

= get-config target=running

    RPC Data Reply 22 for session 10:

    rpc-reply {
        data {
           …. entire database returned by the server
        }
    }

    yangcli andy@myserver>

@saved-config.xml = get-config \

        filter=@myfilter.xml  \
        target=candidate

    rpc-reply {
        data {
        … data requested by the filter
        }
    }

    yangcli andy@myserver>

Reference:

RFC 4741, section 7.1

get-locks

The get-locks command is a high-level wrapper for the <lock> operation. It is used to lock all the databases (<running> plus <candidate> and/or <startup> if they exist). If all the locks cannot be obtained, then release all the locks that were obtained (all-or-nothing).

The entire time to wait for a lock in use is set with the lock-timeout parameter.

The retry-interval parameter is used when the <lock> operation fails with a 'lock-denied' error-tag, because some other session has the lock.

If the <candidate> cannot be locked for another reason, a <discard-changes> operation will be attempted to clear any leftover edits.

Normally, the errors received while attempting to acquire locks are not printed to the log, like normal commands. Instead, if $$log-level system parameter is set to 'debug2' or 'debug3', then these messages will be printed.

get-locks command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	remote
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 3
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| status
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yangcli.yang

Command Parameters:

lock-timeout
- type: uint32 (seconds)
- usage: optional
- default: 120 seconds (2 minutes)
- This parameter specifies how long to wait for a lock that is in use

by another session.

retry-interval
- type: uint32 (seconds)
- usage: optional
- default: 2 seconds
- This parameter specifies how long to wait to retry for a lock.
cleanup
- type:boolean
- usage: optional
- default: true
- This parameter controls whether the 'release-locks' command will be

called automatically if the entire set of required locks cannot be granted.

Positive Response:

the server returns <ok/>

Negative Response:

An error message will be printed if errors are detected locally.
An <rpc-error> message will be printed if the server detected an error.

Usage:

    yangcli andy@myserver> get-locks

lock-timeout=0

    Sending <lock> operations for get-locks...

    RPC OK Reply 6 for session 23:

    RPC OK Reply 7 for session 23:

    get-locks finished OK 
    yangcli andy@myserver>

get-my-session

The get-my-session command is used to retrieve the session customization parameters from the server. It is only supported by the netconfd server.

The session indent amount, session line size, and default behavior for the with-defaults parameter can be controlled at this time.

get-my-session command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	remote
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| data
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| mysession.yang
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Capabilities needed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| none

Command Parameters:

none

Positive Response:

the server returns <indent>, <linesize>, and <with-defaults> elements

Negative Response:

An error message will be printed if errors are detected locally.

An <rpc-error> message will be printed if the server detected an error.

Output:

indent
- type: uint32 (range 0 to 9)

linesize
- type: uint32
- This parameter specifies the desired line length for the session.
with-defaults
- type: enumeration (none report-all trim explicit)
- This parameter specifies the desired default with-defaults filtering

behavior for the session.

    yangcli andy@myserver>

get-my-session

    RPC Data Reply 25 for session 10:
    rpc-reply {
        data {
          indent 3
          linesize 72
          with-defaults report-all
        }
    }

    yangcli andy@myserver>

get-schema

The get-schema command is used to retrieve data model definition files from the server. This is part of the NETCONF monitoring draft. The server must support the :schema-retrieval capability to use this command.

If the server reports a module or module version that yangcli cannot find in its local module library, then an error message will be printed. The get-schema command can then be used to retrieve the missing module from the server.

The ietf-netconf-monitoring.yang module includes a list of the schema supported by the server, which can be retrieved from a server that supports this module, such as netconfd.

    yangcli andy@myserver> sget

/netconf-state/schemas

The preceding command will return a <schemas> container with several <schema> child nodes. One example entry is shown below:

    schemas {
        schema system 2009-06-04 YANG { 
        identifier system 
        version 2009-06-04 
        format YANG 
        namespace http://netconfcentral.org/ns/yuma-system 
        location NETCONF 
        }
    }

The <identifier>, <version> and <format> leafs can be used as the corresponding parameter values for the get-schema command. See the example below for more details.

get-schema command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	remote
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 3
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 3
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| data
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| ietf-netconf-monitoring.yang
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Capabilities needed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| :schema-retrieval

Command Parameters:

identifier
- type: string
- usage: mandatory
- default: none
- This parameter specifies the name of the module to retrieve.
  - Do not use any path specification of file extension; just the module

name is entered.

- - The name is case-sensitive, and must be specified exactly as

defined.

version
- type: string
- usage: mandatory
- default: none
- This parameter specifies the version of the module to retrieve.
  - For YANG modules, this will be the most recent revision date string

defined in a module revision statement.

- - If any version is acceptable, or if the specific version is not

known, then use the empty string.

format
- type: enumeration (XSD YANG YIN RNG)
- usage: mandatory
- default: none
- This parameter specifies the format of the module to be retrieved.
  - XSD: W3C REC REC-xmlschema-1-20041028
  - YANG: RFC 6020
  - YIN: RFC 6020
  - RNG: ISO/IEC 19757-2
  - netconfd only supports the YANG and YIN formats

Positive Response:

the server returns <data>

Negative Response:

An error message will be printed if errors are detected locally.

An <rpc-error> message will be printed if the server detected an error.

Output:

data
- type: anyxml
- yangcli will strip off this XML container if the command result

is being saved to a text file. Only the YANG contents will be saved instead.

Usage:

    yangcli andy@myserver>

@notifications.yang = get-schema \

        identifier=notifications \
        version=2009-06-04 \
        format=YANG

    RPC Data Reply 24 for session 10:

    rpc-reply {
        data {
           …. entire notifications.yang contents
        }
    }

    (after retrieval, the module can be loaded locally
     with the mgrload command)

    yangcli andy@myserver> mgrload

notificications.yang

OK

    yangcli andy@myserver>

Reference:

draft-ietf-netconf-monitoring-06.txt

help

The help command is used to print documentation to STDOUT.

If no session is active, then only help for the local commands and the standard NETCONF commands will be available.

If a NETCONF session is active, then the documentation shown will attempt to exactly match the capabilities of the server.

If additional (i.e., augment generated) parameters are available, then they will be shown in the command output. If the server does not implement some parameters (e.g., feature not supported) then these parameters will not be shown in the command output.

If the server has modified an object with deviation statements, then the altered object will be shown.

The ncx:hidden extension suppresses the help command. If this extension is present in the YANG definition associated with the request, then no help will be available for that object or command.

help command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	local
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| command
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 3
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 3
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| data
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| ietf-netconf-monitoring.yang
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Capabilities needed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| :schema-retrieval

Command Parameters:

choice helptype (not entered)
- command
  - type: string
  - usage: mandatory
  - default: none
  - This parameter specifies the name of the command for which

documentation is requested

- commands
  - type: empty
  - usage: mandatory
  - default: none
  - This parameter will request documentation for all available commands
- notification
  - type: string
  - usage: mandatory
  - default: none
  - This parameter specifies the name of the notification for which

documentation is requested

- object
  - type: string
  - usage: mandatory
  - default: none
  - This parameter specifies the name of the NETCONF database object for

which documentation is requested.

- - - Only top level objects are supported by this command.
    - Documentation for the entire object subtree will be printed, if the

object is a container, choice, or list.

- - - Documentation for nested objects is only available in parameter

mode, using the escape commands for help ('?') and full help ('??')

- type
  - type: string
  - usage: mandatory
  - default: none
  - This parameter specifies the name of the YANG typedef for which

documentation is requested

- - Only top-level typedefs are supported by this command. Local

typedefs within groupings, containers, or lists are not exportable in YANG.

choice help-mode (not entered) (default choice is 'normal')
- brief
  - type: empty
  - usage: optional
  - default: none
  - This parameter specifies that brief documentation mode should be

used.

- normal
  - type: empty
  - usage: optional
  - default: none
  - This parameter specifies that normal documentation mode should be

used.

- full
  - type: empty
  - usage: optional
  - default: none
  - This parameter specifies that full documentation mode should be

used.

Positive Response:

the server prints the requested help text

Negative Response:

An error message will be printed if errors are detected.

Usage:

yangcli> help help full

help 
   Print the yangcli help text 
   input 
      default parameter: command 
      choice helptype 
         leaf command [NcxIdentifier] 
            Show help for the specified command, 
            also called an RPC method

         leaf commands [empty] 
            Show info for all local commands

         leaf notification [NcxIdentifier] 
            Show help for the specified notification

         leaf object [NcxIdentifier] 
            Show help for the specified object

         leaf type [NcxIdentifier] 
            Show help for the specified type

      choice help-mode 
         leaf brief [empty] 
            Show brief help text

         leaf normal [empty] 
            Show normal help text

         leaf full [empty] 
            Show full help text

yangcli andy@myserver> help notification sysConfigChange

notification sysConfigChange 
   Generated when the <running> configuration is changed.

   leaf userName [string]

   leaf sessionId [SessionId] 
      range: 1..max

   leaf remoteHost [ip-address]

   leaf target [string]

   leaf operation [EditOperationType] [d:merge] 
      enum values: merge replace create delete

yangcli andy@svnserver>

history

The history command is used to show, clear, load, or save the command line history buffer.

Use the recall command to recall a previously executed command line, after getting the line number from the history show command.

All lines entered will be saved in the history buffer except an ncx:password value entered in parameter mode.

When yangcli starts, the command line history buffer is empty. If a history file was previously stored with the history save command, then it can be recalled into the buffer with the history load command.

The history clear command is used to delete the entire command line history buffer.

The numbering sequence for commands, starts from zero and keeps incremented until the program exits. If the history buffer is cleared, then the number sequence will continue, not start over at zero.

history command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	local
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| show
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 2
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| data
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yangcli.yang

Command Parameters:

choice history-action (not entered)
- clear
  - type: empty
  - usage: optional
  - default: none
  - This parameter specifies that the history buffer should be cleared.

Unless the contents have been saved with the history save command, there is no way to recover the cleared buffer contents after this command is executed.

- load
  - type: string
  - usage: optional
  - default: $HOME/.yangcli_history
  - This parameter specifies a command history file, and causes the

current command line history contents to be loaded from that file.

- - Special processing for this command allows the history file to be

omitted in idle mode, even though the load parameter is not type 'empty'.

        yangcli> history load
          same as:
        yangcli> history load=$HOME/.yangcli_history

- save
  - type: string
  - usage: optional
  - default: $HOME/.yangcli_history
  - This parameter specifies a command history file, and causes the

current command line history contents to be saved to that file.

- - Special processing for this command allows the history file to be

omitted in idle mode, even though the save parameter is not type 'empty'.

        yangcli> history save
           same as:
         yangcli> history save=$HOME/.yangcli_history

- show
  - type: int32 (-1 for all entries; 1..max for N entries)
  - usage: optional
  - default: -1
  - This parameter specifies the maximum number of history entries to

show.

- - - If no case is selected from this choice, then the command

'history show=-1' will be used by default.

- - - The help-mode choice parameter is only used with the

history show command.

- - - - If the --brief or --normal modes are selected the the

format will include the command number and the command line.

- - - - If the --full mode is selected, then the command data and

time will also be printed.

choice help-mode (not entered)This parameter is ignored unless

the history show command is entered.

- brief
  - type: empty
  - usage: optional
  - default: none
  - This parameter specifies that brief documentation mode should be

used.

- normal
  - type: empty
  - usage: optional
  - default: none
  - This parameter specifies that normal documentation mode should be

used.

- full
  - type: empty
  - usage: optional
  - default: none
  - This parameter specifies that full documentation mode should be

used.

Positive Response:

the requested history entries will be printed for the history

show command

all other commands will return OK

Negative Response:

An error message will be printed if errors are detected.

Usage:

    yangcli> history show=3 full
      [27]    2009-07-04 09:25:34 sget /system

--nofill

      [28]    2009-07-04 09:34:17 @myconfig =

get-config source=running

      [29]    2009-07-04 09:43:54 history show=3 full

    yangcli> history save=~/my-temp-history-file
       OK
    yangcli>

if

The if command is used to start a conditional command block.

The expr parameter is used to specify the XPath expression to test if the if conditional block is true or false. A false block will be skipped and a true block will be executed. The command prompt will contain the string '[F]' while inside a false conditional block in interactive mode. This expression string should be entered with quotes to avoid misinterpreting any whitespace or special characters.

The docroot parameter (if present) specifies the XML document that the 'expr' parameter should be evaluated against. This is optional, since only XPath path expressions need to refer to a document.

If the 'expr' expression is true, the conditional block will be executed, and no further conditional blocks within the same if command sequence will be executed.

if command

....

[elif command]

....

[elif-command]

...

[else command]

...

end command

if command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	local
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| expr
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 2
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| status
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yangcli.yang

Command Parameters:

expr
- type: XPath expression string
- usage: mandatory
- default: none
- This parameter specifies the XPath expression to determine if the

following commands are within a true or false conditional block.

docroot
- type: anyxml
- usage: optional (typically a variable reference is used)
- default: none
- This parameter specifies the XML document that should be used if the

expr XPath expression references any path nodes.

Positive Response:

the server returns <ok/>

Negative Response:

An error message will be printed if errors are detected locally.
- invalid XPath expression or invalid docroot reference will cause an

error

Usage:

    yangcli andy@myserver> if "$sysname = 'localhost'"

    yangcli andy@myserver>

insert

The insert command is used to insert or move YANG list or leaf-list data into a NETCONF database. It is a high level command with utilizes the YANG 'insert' extensions to the NETCONF <edit-config> operation.

insert command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	remote
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| target
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 2
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 7
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| status
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yangcli.yang

Command Parameters:

choice 'from' (not entered)
- type: choice of case 'varref' or case 'from-cli'
- usage: mandatory
- default: none
- This parameter specifies the where yangcli should get the data

from, for the insert operation. It is either a user variable or from interactive input at the command line.

- - varref
    - type: string
    - usage: mandatory
    - default: none
    - This parameter specifies the name of the user variable to use for

the target of the insert operation. The parameter must exist (e.g., created with the fill command) or an error message will be printed.

- - case from-cli (not entered)
    - target
      - type: string
      - usage: mandatory
      - default: none
      - This parameter specifies the database target node of the insert

operation. This is an ncx:schema-instance string, so any instance identifier, or absolute path expression, or something in between, is accepted.

- - - optional
      - type: empty
      - usage: optional
      - default: controlled by $$optional system variable
      - This parameter controls whether optional nodes within the target

will be filled in. It can be used to override the $$optional system variable, when it is set to 'false'.

- - - value
      - type: anyxml
      - usage: mandatory
      - default: none
      - This parameter specifies the value that should be used for the

contents of the target parameter. If it is entered, then the interactive mode prompting for missing parameters will be skipped, if this parameter is complete (or all mandatory nodes present if the $$optional system variable is 'false'). For example, if the target is a leaf, then specifying this parameter will always cause the interactive prompt mode to be skipped.

edit-target
- type: string
- usage: optional (must be present if the order parameter is set to

'before' or 'after').

- default: none
- This parameter specifies the value or key clause that should be used,

as the list or leaf-list insertion point. It identifies the existing entry that the new entry will be inserted before or after, depending on the order parameter.

- - For a leaf-list, the edit-target contains the value of the target

leaf-list node within the configuration being edited. E.g., edit-target='fred'.

- - For a list, the edit-target contains the key values of the target

list node within the configuration being edited. E.g., edit-target=[name='fred'][zipcode=90210].

order
- type: enumeration (first last before after)
- usage: optional
- default: last
- The insert order that should be used. If the value 'before' or

'after' is selected, then the edit-target parameter must also be present.

operation
- type: enumeration (create merge replace)
- usage: optional
- default: merge
- This parameter specifies the nc:operation attribute value for

the NETCONF <edit-config> operation. The insert operation is secondary to the NETCONF operation attribute.

timeout
- type: uint32 (0 = no timeout, otherwise the number of seconds to

wait)

- usage: optional
- default: set to the $$timeout system variable, default 30

seconds

- This parameter specifies the number of seconds to wait for a response

from the server before giving up. The session will not be dropped if a remote command times out, but any late response will be dropped. A value of zero means no timeout should be used, and yangcli will wait forever for a response.

System Variables:

$$default-operation
- The <default-operation> parameter for the <edit-config> operation will be derived from this variable.

$$error-option
- The <error-option> parameter for the <edit-config> operation will be derived from this variable
$$test-option
- The <test-option> parameter for the <edit-config> operation will be derived from this variable

Positive Response:

the server returns <ok/>

Negative Response:

An error message will be printed if errors are detected locally.
An <rpc-error> message will be printed if the server detected an error.

Usage:

    yangcli andy@myserver> insert varref=myvar order=first

    RPC OK Reply 25 for session 10:

    yangcli andy@myserver> insert

/nacm/rules/data-rule \

            order=after \
            edit-target=”[name='test-rule']”

    (user will be prompted to fill in the data-rule contents)

    RPC OK Reply 26 for session 10:

    yangcli andy@myserver>

Reference:

draft-ietf-netmod-yang-13

kill-session

The kill-session command is used to terminate a NETCONF session (other than the current session). All NETCONF implementations must support this command. It is needed sometimes to unlock a NETCONF database locked by a session that is idle or stuck.

If the lock command returns a 'lock-denied' <error-tag>, it will also include an <error-info> field called <session-id>. This is the session number that currently holds the requested lock. The same value should be used for the session-id parameter in this command, to terminate the session will the lock.

Note: this is an extreme measure, which should be used with caution.

kill-session command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	remote
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| target
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| status
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yuma-netconf.yang

Command Parameters:

session-id
- type: uint32 (range: 1.. max)
- usage: mandatory
- default: none
- This parameter specifies the session number of the currently active

NETCONF session that should be terminated.

Positive Response:

the server returns <ok/>

Negative Response:

An error message will be printed if errors are detected locally.
An <rpc-error> message will be printed if the server detected an error.

Usage:

    yangcli andy@myserver> kill-session session-id=11

    RPC OK Reply 27 for session 10:

    yangcli andy@myserver>

Reference:

RFC 4741, section 7.9

list

This list command is used to display the commands, objects, and oids (object identifiers) that are available at the time.

The list commands command will display the local commands and the remote commands that are available in the current NETCONF session, or which have been loaded with the mgrload command.

The list files command will display the data files that are in the current data search path. The module parameter has no affect in this mode.

The list modules command will display the YANG files that are in the current YANG module search path. The module parameter has no affect in this mode.

The list objects command will display the top-level objects that are currently available in the current NETCONF session, or which have been loaded with the mgrload command.

The list oids command will display the object identifiers of the top-level objects that are currently available in the current NETCONF session, or which have been loaded with the mgrload command.

The list scripts command will display the script files that are in the current script search path. The module parameter has no affect in this mode.

list command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	local
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 6
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| data
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yangcli.yang

Command Parameters:

choice help-mode (not entered)This parameter is ignored if the

listtype choice is set to ' the history show command is entered.

- brief
  - type: empty
  - usage: optional
  - default: none
  - This parameter specifies that brief documentation mode should be

used.

- normal
  - type: empty
  - usage: optional
  - default: none
  - This parameter specifies that normal documentation mode should be

used.

- full
  - type: empty
  - usage: optional
  - default: none
  - This parameter specifies that full documentation mode should be

used.

choice 'listtype' (not entered)
- usage: mandatory
- default: none
- This parameter specifies the what type of data should be listed.
- commands
  - type: empty
  - usage: mandatory
  - default: none
  - This parameter specifies that the available commands should be

listed.

- - - If the help-mode is set to 'brief', then only the command

names will be listed.

- - - If the help-mode is set to 'normal', then the XML prefix and

the command name will be listed.

- - - If the help-mode is set to 'full', then the module name and

the command name will be listed.

- files
  - type: empty
  - usage: mandatory
  - default: none
  - This parameter specifies that all the data files in the current data

search path should be listed.

- modules
  - type: empty
  - usage: mandatory
  - default: none
  - This parameter specifies that all the YANG files in the current

module search path should be listed.

- objects
  - type: empty
  - usage: mandatory
  - default: none
  - This parameter specifies that the available top-level objects should

be listed.

- - - If the help-mode is set to 'brief', then only the object

names will be listed.

- - - If the help-mode is set to 'normal', then the XML prefix and

the object name will be listed.

- - - If the help-mode is set to 'full', then the module name and

the object name will be listed.

- oids
  - type: empty
  - usage: mandatory
  - default: none
  - This parameter specifies that the available top-level object

identifiers should be listed.

- - - The help-mode parameter has no effect
- scripts
  - type: empty
  - usage: mandatory
  - default: none
  - This parameter specifies that all the script files in the current

script search path should be listed.

module
- type: string
- usage: optional
- default: none
- This parameter specifies a module name. If present then only

information for the specified YANG module will be displayed.

Positive Response:

the requested information will be printed

Negative Response:

An error message will be printed if errors are detected.

Usage:

yangcli andy@myserver> list objects full module=test

   test:instance1 
   test:instance2 
   test:leafref1 
   test:leafref2 
   test:test1 
   test:test2 
   test:test3 
   test:idtest 
   test:musttest 
   test:anyxml.1 
   test:binary.1 
   test:bits.1 
   test:boolean.1 
   test:empty.1 
   test:enumeration.1 
   test:identityref.1 
   test:instance-identifier.1 
   test:instance-identifier.2 
   test:int8.1 
   test:int16.1 
   test:int32.1 
   test:int64.1 
   test:leafref.1 
   test:leafref.2 
   test:string.1 
   test:uint8.1 
   test:uint16.1 
   test:uint32.1 
   test:uint64.1 
   test:dec64.1 
   test:dec64.2 
   test:dec64.3 
   test:union.1 
   test:container.1 
   test:container.2 
   test:list.1 
   test:choice.1 
   test:xpath.1

yangcli andy@myserver>

load

The load command is used to load a YANG module into the server.

This command is only supported by the netconfd server.

The YANG files must be available in the module search path for the server.

Refer to the netconfd configuration section for more details on adding new YANG modules into the server.

After using this command, the mgrload command may also be needed to keep the current session synchronized with the server.

Use the revision parameter to load a specific revision of a module.

The server will return the revision date of the module that was loaded (or already present).

load command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	remote
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| module
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 3
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| data
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yuma-system.yang

Command Parameters:

module
- type: string (length 1 .. 63)
- usage: mandatory
- default: none
- This parameter specifies the name of the module to load.
revision
- type: date string (YYYY-MM-DD)
- usage: optional
- default: none
- This parameter specifies the revision date of the module to load.
deviation:
- type: leaf-list of deviation module names
- usage: optional (0 or more instances)
- default: none
- This parameter specifies a deviation module to load prior to loading

the requested module.

Positive Response:

the server returns <mod-revision>

Negative Response:

An error message will be printed if errors are detected locally.
An <rpc-error> message will be printed if the server detected an error.

Usage:

    yangcli andy@myserver> load toaster revision=2009-06-23

    RPC Data Reply 27 for session 10:

    rpc-reply { 
       mod-revision 2009-06-23 
    }

    yangcli andy@myserver>

lock

The lock command is used to request a global lock on a NETCONF database. It is used, along with the unlock command, to obtain exclusive write access to the NETCONF server.

The scope of a lock command is the lifetime of the session that requested the lock. This means that if the session that owns the lock is dropped for any reason, all the locks it holds will be released immediately by the server.

The use of database locks is optional in NETCONF, but it must be implemented by every server. It is strongly suggested that locks be used if multiple managers are likely to log into the particular NETCONF server.

One or more locks may be needed to execute a transaction safely:

If the :writable-running capability is supported, then a lock on the <running> database is needed. This database can be

locked at any time.

If the :startup capability is supported, then a lock on the <startup> database is needed. This database can be locked

at any time.

If the :candidate capability is supported, then a lock on the <candidate> database is needed. A lock on the <running> database is also needed.
- The <candidate> database can only be locked if there are no active edits in it.
- The discard-changes command may be needed to clear a <candidate> database that has been left edited by a session that terminated unexpectedly.
- Note: There is no way in NETCONF to tell the difference between an actively edited <candidate> database and an 'abandoned' <candidate> database. The server will almost never clear the <candidate> database. It will only clear any locks

held. Use the discard-changes command (for other session's edits) with extreme caution.

lock command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	remote
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| status
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yuma-netconf.yang
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Capabilities needed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Capabilities optional:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| :candidate:startup:url

Command Parameters:

target
- type: container with 1 of N choice of leafs
- usage: mandatory
- default: none
- This parameter specifies the name of the target database to be

locked.

- container contents: 1 of N:
  - candidate
    - type: empty
    - capabilities needed: :candidate
  - running
    - type: empty
    - capabilities needed: none
  - startup
    - type: empty
    - capabilities needed: startup
  - url
    - type: yang:uri
    - capabilities needed: :url, and the scheme used in the URL must be

specified in the :url capability 'schemes' parameter.

- - - To enter this parameter, the interactive mode must be used. The

shorthand mode (target=url) cannot be used, since this parameter contains a string.

Positive Response:

the server returns <ok/>

Negative Response:

An error message will be printed if errors are detected locally.
An <rpc-error> message will be printed if the server detected an error.
- If the <error-tag> is 'lock-denied' then the <error-info> will contain a <session-id> leaf. This identifies the session

number of the current lock holder.

Usage:

    yangcli andy@myserver> lock target=candidate

    RPC OK Reply 29 for session 10:

    yangcli andy@myserver>

log-debug

The log-debug command prints a message to the program log, if the $$log-level system variable is set to 'debug' or a higher enumeration (e.g., 'debug2').

The msg parameter is used to provide the message string to print.

log-debug command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	local
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| msg
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| status
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yangcli.yang

Command Parameters:

msg
- type: string
- usage: mandatory
- default: none
- This parameter specifies the string to print to the program log.

Positive Response:

the server returns <ok/>

Negative Response:

An error message will be printed if the msg parameter contains

errors.

Usage:

    yangcli andy@myserver>log-debug 'starting strict foo'

    Debug: starting script foo

    yangcli andy@myserver>

log-error

The log-error command prints a message to the program log, if the $$log-level system variable is set to 'error' or a higher enumeration (e.g., 'info').

The msg parameter is used to provide the message string to print.

log-error command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	local
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| msg
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| status
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yangcli.yang

Command Parameters:

msg
- type: string
- usage: mandatory
- default: none
- This parameter specifies the string to print to the program log.

Positive Response:

the server returns <ok/>

Negative Response:

An error message will be printed if the msg parameter contains

errors.

Usage:

    yangcli andy@myserver>log-error 'sysName not correct'

    Error: sysName not correct

    yangcli andy@myserver>

log-info

The log-info command prints a message to the program log, if the $$log-level system variable is set to 'info' or a higher enumeration (e.g., 'debug').

The msg parameter is used to provide the message string to print.

log-info command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	local
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| msg
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| status
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yangcli.yang

Command Parameters:

msg
- type: string
- usage: mandatory
- default: none
- This parameter specifies the string to print to the program log.

Positive Response:

the server returns <ok/>

Negative Response:

An error message will be printed if the msg parameter contains

errors.

Usage:

    yangcli andy@myserver>log-info 'sysName is correct'

    Info: sysName is correct

    yangcli andy@myserver>

log-warn

The log-warn command prints a message to the program log, if the $$log-level system variable is set to 'warn' or a higher enumeration (e.g., 'debug').

The msg parameter is used to provide the message string to print.

log-warn command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	local
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| msg
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| status
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yangcli.yang

Command Parameters:

msg
- type: string
- usage: mandatory
- default: none
- This parameter specifies the string to print to the program log.

Positive Response:

the server returns <ok/>

Negative Response:

An error message will be printed if the msg parameter contains

errors.

Usage:

    yangcli andy@myserver>log-warn 'sysName object not found'

    Warning: sysName object not found

    yangcli andy@myserver>

merge

The merge command is a high-level <edit-config> operation. It is used to merge some new nodes into the default target database.

A target node is specified (in 1 of 2 ways), and then the data structure is filled in. Only mandatory nodes will be filled in unless the $$optional system variable is set to 'true'.

Refer to the fill command for more details on interactive mode data structure completion.

merge command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	remote
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| target
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 5
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| status
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yangcli.yang
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Capabilities needed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| :candidate or :writable-running

Command Parameters:

choice 'from' (not entered)
- type: choice of case 'varref' or case 'from-cli'
- usage: mandatory
- default: none
- This parameter specifies the where yangcli should get the data

from, for the merge operation. It is either a user variable or from interactive input at the command line.

- - varref
    - type: string
    - usage: mandatory
    - default: none
    - This parameter specifies the name of the user variable to use for

the target of the merge operation. The parameter must exist (e.g., created with the fill command) or an error message will be printed.

- - case from-cli (not entered)
    - target
      - type: string
      - usage: optional (target or urltarget must be entered)
      - default: none
      - This parameter specifies the database target node of the merge

operation. This is an ncx:schema-instance string, so any instance identifier, or absolute path expression, or something in between, is accepted.

- - - urltarget
      - type: string
      - usage: optional
      - default: none
      - This parameter specifies the database target node of the merge

operation. This is an UrlPath string.

- - - optional
      - type: empty
      - usage: optional
      - default: controlled by $$optional system variable
      - This parameter controls whether optional nodes within the target

will be filled in. It can be used to override the $$optional system variable, when it is set to 'false'.

- - - value
      - type: anyxml
      - usage: mandatory
      - default: none
      - This parameter specifies the value that should be used for the

contents of the target parameter. If it is entered, then the interactive mode prompting for missing parameters will be skipped, if this parameter is complete (or all mandatory nodes present if the $$optional system variable is 'false'). For example, if the target is a leaf, then specifying this parameter will always cause the interactive prompt mode to be skipped.

timeout
- type: uint32 (0 = no timeout, otherwise the number of seconds to

wait)

- usage: optional
- default: set to the $$timeout system variable, default 30

seconds

- This parameter specifies the number of seconds to wait for a response

from the server before giving up. The session will not be dropped if a remote command times out, but any late response will be dropped. A value of zero means no timeout should be used, and yangcli will wait forever for a response.

System Variables:

$$default-operation
- The <default-operation> parameter for the <edit-config> operation will be derived from this variable.

$$error-option
- The <error-option> parameter for the <edit-config> operation will be derived from this variable
$$test-option
- The <test-option> parameter for the <edit-config> operation will be derived from this variable

Positive Response:

the server returns <ok/>

Negative Response:

An error message will be printed if errors are detected locally.
An <rpc-error> message will be printed if the server detected an error.

Usage:

    yangcli andy@myserver> merge \

target=/nacm/rules/moduleRule[moduleName='netconf']\

        [allowed-rights='read
write']/allowed-group \
        value=ncx:guest

    (no user prompting; <edit-config> request sent right
away)

    RPC OK Reply 31 for session 10:

    yangcli andy@myserver>

Reference:

RFC 4741, section 7.2

mgrload

The mgrload command is used to load a YANG module into yangcli.

The YANG files must be available in the module search path for yangcli.

mgrload command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	local
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| module
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 3
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| status
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yangcli.yang

Command Parameters:

module
- type: string (length 1 .. 63)
- usage: mandatory
- default: none
- This parameter specifies the name of the module to load.
revision
- type: date string (YYYY-MM-DD)
- usage: optional
- default: none
- This parameter specifies the revision date of the module to load.
deviation:
- type: leaf-list of deviation module names
- usage: optional (0 or more instances)
- default: none
- This parameter specifies a deviation module to load prior to loading

the requested module.

Positive Response:

OK

Negative Response:

An error message will be printed if errors are detected.

Usage:

    yangcli> mgrload toaster

    Load module toaster OK

    yangcli>

no-op

The no-op command is used to test server message processing response times, by providing a baseline response time to do nothing except return <ok/>.

It can also be used as an application-level keep-alive to prevent proxy idle timeout or server idle timeout problems from occurring.

This command is only supported by the netconfd server. The server will simply respond 'OK', if the request is well-formed.

no-op command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	remote
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| status
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yuma-system.yang

Positive Response:

the server returns <ok/>

Negative Response:

An error message will be printed if errors are detected locally.
An <rpc-error> message will be printed if the server detected an error.

Usage:

    yangcli andy@myserver> no-op

    RPC OK Reply 31 for session 10:

    yangcli andy@myserver>

pwd

The pwd command is used to print the current working directory.

pwd command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	local
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| status
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yangcli.yang

Positive Response:

the current working directory is printed to the log or STDOUT

Negative Response:

An error message will be printed if errors are detected.

Usage:

    yangcli> pwd

    Current working directory is /home/andy

    yangcli>

quit

The quit command is used to terminate the yangcli program.

If a NETCONF session is in progress, it will be dropped without sending a close-session command first. This should be taken into account if the server reports dropped TCP connections as an error.

quit command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	local
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yangcli.yang

Positive Response:

The program terminates; no response will be printed.

Negative Response:

An error message will be printed if errors are detected.

Usage:

    yangcli> quit

    andy@myworkstation>

recall

The recall command is used to recall a previously entered command line from the command line history buffer.

A command is recalled by its command ID number. Use the history show command to see the contents of the command line history buffer.

recall command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	local
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| index
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| data
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yangcli.yang

Positive Response:

The specified command line is recalled into the current command line.

Negative Response:

An error message will be printed if errors are detected.

Usage:

    yangcli> recall 7

    yangcli>sget /system

release-locks

The release-locks command is used to release all the locks that were previously granted with the get-locks command.

If the get-locks command was not used, then this command will fail with an error message that no locks are active to unlock.

release-locks command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	remote
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| status
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yangcli.yang

Positive Response:

The previously granted locks are released.

Negative Response:

An error message will be printed if errors are detected locally.
An <rpc-error> message will be printed if the server detected an error.

Usage: (showing 2 locks being released)

    yangcli ady@myserver> release-locks

    RPC OK Reply 8 for session 23: 
    RPC OK Reply 9 for session 23:

    yangcli andy@myserver>

replace

The replace command is a high-level <edit-config> operation. It is used to replace an existing subtree with some new nodes, in the default target database.

Only the subtree indicated by the target or varref parameter will be replaced.

A target node is specified (in 1 of 2 ways), and then the data structure is filled in. Only mandatory nodes will be filled in unless the $$optional system variable is set to 'true'.

Refer to the fill command for more details on interactive mode data structure completion.

replace command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	remote
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| target
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 5
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| status
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yangcli.yang
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Capabilities needed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| :candidate or :writable-running

Command Parameters:

choice 'from' (not entered)
- type: choice of case 'varref' or case 'from-cli'
- usage: mandatory
- default: none
- This parameter specifies the where yangcli should get the data

from, for the replace operation. It is either a user variable or from interactive input at the command line.

- - varref
    - type: string
    - usage: mandatory
    - default: none
    - This parameter specifies the name of the user variable to use for

the target of the replace operation. The parameter must exist (e.g., created with the fill command) or an error message will be printed.

- - case from-cli (not entered)
    - target
      - type: string
      - usage: optional (target or urltarget must be present)
      - default: none
      - This parameter specifies the database target node of the replace

operation. This is an ncx:schema-instance string, so any instance identifier, or absolute path expression, or something in between, is accepted.

- - - urltarget
      - type: string
      - usage: optional
      - default: none
      - This parameter specifies the database target node of the replace

operation. This is an UrlPath string.

- - - optional
      - type: empty
      - usage: optional
      - default: controlled by $$optional system variable
      - This parameter controls whether optional nodes within the target

will be filled in. It can be used to override the $$optional system variable, when it is set to 'false'.

- - - value
      - type: anyxml
      - usage: mandatory
      - default: none
      - This parameter specifies the value that should be used for the

contents of the target parameter. If it is entered, then the interactive mode prompting for missing parameters will be skipped, if this parameter is complete (or all mandatory nodes present if the $$optional system variable is 'false'). For example, if the target is a leaf, then specifying this parameter will always cause the interactive prompt mode to be skipped.

timeout
- type: uint32 (0 = no timeout, otherwise the number of seconds to

wait)

- usage: optional
- default: set to the $$timeout system variable, default 30

seconds

- This parameter specifies the number of seconds to wait for a response

from the server before giving up. The session will not be dropped if a remote command times out, but any late response will be dropped. A value of zero means no timeout should be used, and yangcli will wait forever for a response.

System Variables:

$$default-operation
- The <default-operation> parameter for the <edit-config> operation will be derived from this variable.

$$error-option
- The <error-option> parameter for the <edit-config> operation will be derived from this variable
$$test-option
- The <test-option> parameter for the <edit-config> operation will be derived from this variable

Positive Response:

the server returns <ok/>

Negative Response:

An error message will be printed if errors are detected locally.
An <rpc-error> message will be printed if the server detected an error.

Usage:

    yangcli andy@myserver> replace

\

target=/nacm/rules/moduleRule[moduleName='yuma-system']\

        [allowed-rights='exec']

    (user prompted to fill in specified <moduleRule>
element)

    RPC OK Reply 31 for session 10:

    yangcli andy@myserver>

Reference:

RFC 4741, section 7.2

restart

The restart command is used to restart the NETCONF server.

This command is only supported by the netconfd server.

The default access control configuration for netconfd will not allow any user except the designated 'superuser' account to invoke this command. Refer to the netconfd user manual for details on configuring access control.

restart command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	remote
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| status
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yuma-system.yang

Positive Response:

the server will drop all sessions and restart

Negative Response:

An error message will be printed if errors are detected locally.
An <rpc-error> message will be printed if the server detected an error.

Usage:

    yangcli andy@myserver> restart

    ses: session 10 shut by remote peer

    yangcli>

run

The run command is used to run a yangcli script.

Refer to the section on scripts for details on how to write a script.

The script name is the only mandatory parameter. There are 9 generic parameters (named P1 to P9) that can be used to pass string parameters to scripts. Within a script, these are referenced with local variables ($1 to $9).

The run command can be used within a script.

Scripts do not return any status or data at this time.

The run command can appear inside a script, starting a new run level. An error will occur if a loop occurs or too many nest levels are used. Up to 64 run levels are supported in yangcli.

run command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	local
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| script
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 10
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| status
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yangcli.yang

Command Parameters:

P1, P2, P3, P4, P5, P6, P7, P8, P9
- type: string
- usage: optional
- default: none
- These parameters provide a generic string parameter passing mechanism

for each script invocation, similar to unix shell scripts. Within the script, the parameters $1, $2, $3, $4, $5, $6, $7, $8 and $9 will be non-NULL only if the corresponding 'Pn' parameter was set in the script invocation.

script
- type: string
- usage: mandatory
- default: none
- This parameter specifis the name of the script to be run. If a path

specification is included, then it will be used. Otherwise the current script search path will be used to find the script.

System Variables:

$$runpath
- Controls where yangcli will look for files specified in the

script parameter.

Positive Response:

the specified script will be executed

Negative Response:

An error message will be printed if errors are detected locally.
An <rpc-error> message will be printed if the server detected an error, if any remote commands are contained in the script.

Usage:

    yangcli> run connect P1=yangrocks

    runstack: Starting level 1 script /home/andy/scripts/connect

    (commands and responses are printed as if they were typed)

    runstack: Ending level 1 script /home/any/scripts/connect
    yangcli andy@myserver>

save

The save command is used to save NETCONF database edits to non-volatile storage, on the server. It is a pseudo-command, mapped to other remote commands depending on which database target is supported by the server (<candidate> or <running>).

The save command usually maps to either the commit or the copy-config command. Refer to the section on NETCONF sessions for more details.

save command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	remote
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yangcli.yang

Positive Response:

The server returns one or two <ok/> responses.

Negative Response:

An error message will be printed if errors are detected locally.

An <rpc-error> message will be printed if the server detected an error.

Usage:

    yangcli andy@myserver> save

    RPC OK Reply 34 on session 10

    yangcli andy@myserver>

set-log-level

The set-log-level command is used to configure the server logging verbosity level. It is only supported by the netconfd server.

This operation is defined as nacm:secure, so only the system super-user can invoke this command by default.

set-log-level command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	remote
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| status
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yuma-system.yang
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Capabilities needed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| none

Command Parameters:

log-level
- type: enumeration (off, error, warn, info, debug, debug2, debug3)
- This mandatory parameter specifies the desired server logging

verbosity level.

Positive Response:

the server returns <ok/>

Negative Response:

An error message will be printed if errors are detected locally.

An <rpc-error> message will be printed if the server detected an error.]

    yangcli andy@myserver>

set-log-level log-level=debug2

    RPC OK Reply 29 for session 10:

    yangcli andy@myserver>

set-my-session

The set-my-session command is used to configure the session customization parameters on the server. It is only supported by the netconfd server.

The session line size and default behavior for the with-defaults parameter can be controlled at this time.

Since all parameters are optional, they need to be entered in the same command line as the command name. Otherwise the $$optional system variable needs to be set to 'true'. If not, then no parameters will be sent to the server, and no session parameters will be changed.

set-my-session command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	remote
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 3
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| status
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yuma-mysession.yang
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Capabilities needed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| none

Command Parameters:

indent
- type: uint32 (range: 0 .. 9)
- This parameter specifies the desired number of spaces to indent for

each new XML nest level, for the session. If missing, then the indent amount is not changed.

linesize
- type: uint32 (range: 40 .. 1024)
- This parameter specifies the desired line length for the session. If

missing, then the current line size is not changed.

with-defaults
- type: enumeration (report-all trim explicit)
- This parameter specifies the desired default with-defaults filtering

behavior for the session. If missing, the current with-defaults behavior is not changed.

Positive Response:

the server returns <ok/>

Negative Response:

An error message will be printed if errors are detected locally.

An <rpc-error> message will be printed if the server detected an error.]

    yangcli andy@myserver>

set-my-session \

            --linesize=64 --with-defaults=trim

    RPC OK Reply 25 for session 10:

    yangcli andy@myserver>

sget

The sget command is used to invoke a NETCONF <get> operation with a subtree filter.

A target node is specified (in 1 of 2 ways), and then the data structure is filled in. Only mandatory nodes will be filled in unless the $$optional system variable is set to 'true'. This step can be skipped completely with the nofill parameter.

Refer to the fill command for more details on interactive mode data structure completion.

sget command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	remote
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| target
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 5
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| data
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yangcli.yang
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Capabilities needed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Capabilities optional:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| :with-defaults

Command Parameters:

choice 'from' (not entered)
- type: choice of case 'varref' or case 'from-cli'
- usage: mandatory
- default: none
- This parameter specifies the where yangcli should get the data

from, for the subtree filter target of the <get> operation. It is either a user variable or from interactive input at the command line.

- - varref
    - type: string
    - usage: mandatory
    - default: none
    - This parameter specifies the name of the user variable to use for the subtree filter target of the <get> operation. The

parameter must exist (e.g., created with the fill command) or an error message will be printed.

- - case from-cli (not entered)
    - target
      - type: string
      - usage: optional (target or urltarget must be present)
      - default: none
      - This parameter specifies the database target node of the <get> operation. This is an ncx:schema-instance string,

so any instance identifier, or absolute path expression, or something in between, is accepted.

- - - - The escape command ('?s') can be used in parameter mode to skip a

parameter completely.

- - - - Entering the empty string for a parameter will cause a subtree

selection node to be created instead of a content match node

- - - urltarget
      - type: string
      - usage: optional
      - default: none
      - This parameter specifies the database target node of the get

operation. This is an UrlPath string.

- - - optional
      - type: empty
      - usage: optional
      - default: controlled by $$optional system variable
      - This parameter controls whether optional nodes within the target

will be filled in. It can be used to override the $$optional system variable, when it is set to 'false'.

- - - value
      - type: anyxml
      - usage: mandatory
      - default: none
      - This parameter specifies the value that should be used for the

contents of the target parameter. If it is entered, then the interactive mode prompting for missing parameters will be skipped, if this parameter is complete (or all mandatory nodes present if the $$optional system variable is 'false'). For example, if the target is a leaf, then specifying this parameter will always cause the interactive prompt mode to be skipped.

nofill
- type: empty

- usage: optional
- default: none
- This parameter specifies the that no interactive prompting to fill in

the contents of the specified subtree filter target will be done.

- - This causes the entire selected subtree to be requested in the

filter.

- - yangcli will attempt to figure out if there can be multiple

instances of the requested subtree. If not, then nofill will be the default for that target parameter.

with-defaults
- type: enumeration (none report-all report-all-tagged trim explicit)
- usage: optional
- default: none
- capabilities needed: with-defaults
- This parameter controls how nodes containing only default values are returned in the <rpc-reply>.

System Variables:

$$timeout
- The response timeout interval will be derived from this system

variable.

$$with-defaults
- The <with-defaults> parameter for the <get> operation will be derived from this system variable.

Positive Response:

the server returns <data>

Negative Response:

An error message will be printed if errors are detected locally.
An <rpc-error> message will be printed if the server detected an error.

Output:

data
- type: anyxml
- This element will contain the requested data from the

<running> database or non-config data structures.

Usage:

    yangcli andy@myserver> sget sytem

    Filling container /system: 
    RPC Data Reply 32 for session 10:
    
    rpc-reply { 
       data { 
          system { 
             sysName myserver.localdomain 
             sysCurrentDateTime 2009-07-06T02:24:19Z 
             sysBootDateTime 2009-07-05T19:22:28Z 
          } 
       } 
    }

    yangcli andy@myserver>

Reference:

RFC 4741, section 7.7

sget-config

The sget-config command is used to invoke a NETCONF <get-config> operation with a subtree filter.

A target node is specified (in 1 of 2 ways), and then the data structure is filled in. Only mandatory nodes will be filled in unless the $$optional system variable is set to 'true'. This step can be skipped completely with the nofill parameter.

Refer to the fill command for more details on interactive mode data structure completion.

sget-config command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	remote
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| target
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 2
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 6
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| data
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yangcli.yang
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Capabilities needed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Capabilities optional:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| :candidate:startup:url:with-defaults

Command Parameters:

choice 'from' (not entered)
- type: choice of case 'varref' or case 'from-cli'
- usage: mandatory
- default: none
- This parameter specifies the where yangcli should get the data

from, for the subtree filter target of the <get> operation. It is either a user variable or from interactive input at the command line.

- - varref
    - type: string
    - usage: mandatory
    - default: none
    - This parameter specifies the name of the user variable to use for the subtree filter target of the <get> operation. The

parameter must exist (e.g., created with the fill command) or an error message will be printed.

- - case from-cli (not entered)
    - target
      - type: string
      - usage: optional (target or urltarget must be present)
      - default: none
      - This parameter specifies the database target node of the <get> operation. This is an ncx:schema-instance string,

so any instance identifier, or absolute path expression, or something in between, is accepted.

- - - - The escape command ('?s') can be used in parameter mode to skip a

parameter completely.

- - - - Entering the empty string for a parameter will cause a subtree

selection node to be created instead of a content match node

- - - urltarget
      - type: string
      - usage: optional
      - default: none
      - This parameter specifies the database target node of the

get-config operation. This is an UrlPath string.

- - - optional
      - type: empty
      - usage: optional
      - default: controlled by $$optional system variable
      - This parameter controls whether optional nodes within the target

will be filled in. It can be used to override the $$optional system variable, when it is set to 'false'.

- - - value
      - type: anyxml
      - usage: mandatory
      - default: none
      - This parameter specifies the value that should be used for the

contents of the target parameter. If it is entered, then the interactive mode prompting for missing parameters will be skipped, if this parameter is complete (or all mandatory nodes present if the $$optional system variable is 'false'). For example, if the target is a leaf, then specifying this parameter will always cause the interactive prompt mode to be skipped.

nofill
- type: empty

- usage: optional
- default: none
- This parameter specifies the that no interactive prompting to fill in

the contents of the specified subtree filter target will be done.

- - This causes the entire selected subtree to be requested in the

filter.

- - yangcli will attempt to figure out if there can be multiple

instances of the requested subtree. If not, then nofill will be the default for that target parameter.

source
- type: container with 1 of N choice of leafs
- usage: mandatory
- default: none
- This parameter specifies the name of the source database for the

retrieval operation.

- container contents: 1 of N:
  - candidate
    - type: empty
    - capabilities needed: :candidate
  - running
    - type: empty
    - capabilities needed: none
  - startup
    - type: empty
    - capabilities needed: startup
  - url
    - type: yang:uri
    - capabilities needed: :url, and the scheme used in the URL must be

specified in the :url capability 'schemes' parameter

- - - To enter this parameter, the interactive mode must be used. The

shorthand mode (source=url) cannot be used, since this parameter contains a string.

with-defaults
- type: enumeration (none report-all report-all-tagged trim explicit)
- usage: optional
- default: none
- capabilities needed: with-defaults
- This parameter controls how nodes containing only default values are returned in the <rpc-reply>.

System Variables:

$$timeout
- The response timeout interval will be derived from this system

variable.

$$with-defaults
- The <with-defaults> parameter for the <get-config> operation will be derived from this system variable.

Positive Response:

the server returns <data>

Negative Response:

An error message will be printed if errors are detected locally.
An <rpc-error> message will be printed if the server detected an error.

Output:

data
- type: anyxml
- This element will contain the requested data from the database

indicated by the source parameter.

Usage:

    yangcli andy@myserver> sget-config /nacm/rules/data-rule \
        source=candidate \
        nofill

    RPC Data Reply 35 for session 10:

    rpc-reply { 
       data { 
         nacm { 
             rules { 
                data-rule nacm-tree { 
                   name nacm-tree 
                   path /nacm:nacm 
                   allowed-rights { 
                      read 
                      write 
                   } 
                   allowed-group nacm:admin 
                   comment 'access to nacm config' 
                } 
             } 
          } 
       } 
    }

    yangcli andy@myserver>

Reference:

RFC 4741, section 7.1

show

The show command is used to show program status and YANG details that may be needed during management of a NETCONF server.

There are several variants of the show command:

The show cli command prints the contents of the yangcli CLI and

config file parameters.

The show global command prints the contents of one global user

variable.

The show globals command prints a summary or the contents of all

the global user variables.

The show local command prints the contents of one local user

variable.

The show locals command prints a summary or the contents of all

the local user variables.

The show module command prints meta information or help text for

one YANG module.

The show modules command prints meta information for all the

currently available YANG modules. IF a session is active, this will be the list of modules the server reported, plus any modules loaded with the mgrload command.

The show objects command prints the available objects or help

text for the available objects.

The show session command prints the session startup screen

information for the current session.

The show system command prints the contents of the yangcli

system variables.

The show var command prints the contents of the specified

variable.

The show vars command prints a summary or the contents of all

the program variables.

The show version command prints the yangcli version number

show command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	local
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 2
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| data
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yangcli.yang

Command Parameters:

choice help-mode (not entered) (default choice is 'normal')
- brief
  - type: empty
  - usage: optional
  - default: none
  - This parameter specifies that brief documentation mode should be

used.

- normal
  - type: empty
  - usage: optional
  - default: none
  - This parameter specifies that normal documentation mode should be

used.

- full
  - type: empty
  - usage: optional
  - default: none
  - This parameter specifies that full documentation mode should be

used.

choice showtype (not entered)
- mandatory 1 of N choice for the sub-command for the show

command

- - cli
    - type: empty
    - usage: mandatory
    - default: none
    - This parameter selects the yangcli CLI and configuration variables.
      - The help-mode parameter has no affect on this command.
  - global
    - type: string
    - usage: mandatory
    - default: none
    - This parameter specifies the name of the global variable to show

information for.

- - - - If help-mode is 'brief', then the name, variable object, and

type of the global variable object will be printed.

- - - - If help-mode is 'normal' or 'full', then the contents of the

specified global variable will be printed.

- - globals
    - type: empty
    - usage: mandatory
    - default: none
    - This parameter specifies that information for all global variables

should be printed.

- - - - If help-mode is 'brief', then the name, variable object, and

type of each global variable object will be printed.

- - - - If help-mode is 'normal' or 'full', then the contents of

each global variable will be printed.

- - local
    - type: string
    - usage: mandatory
    - default: none
    - This parameter specifies the name of the local variable to show

information for.

- - - - If help-mode is 'brief', then the name, variable object, and

type of the local variable object will be printed.

- - - - If help-mode is 'normal' or 'full', then the contents of the

specified local variable will be printed.

- - locals
    - type: empty
    - usage: mandatory
    - default: none
    - This parameter specifies that information for all local variables

should be printed.

- - - - If help-mode is 'brief', then the name, variable object, and

type of each local variable object will be printed.

- - - - If help-mode is 'normal' or 'full', then the contents of

each local variable will be printed.

- - module
    - type: string
    - usage: mandatory
    - default: none
    - This parameter specifies the name of the module to show information

for.

- - - - If help-mode is 'brief' or 'normal', then the name, version,

namespace, and source of the module will be printed.

- - - - If help-mode is 'full', then the module level help text for

the specified module will be printed.

- - modules
    - type: empty
    - usage: mandatory
    - default: none
    - This parameter specifies that information for all available modules

should be printed:

- - - - If help-mode is 'brief', then the name of each module will

be printed.

- - - - If help-mode is 'normal', then the XML prefix, name, and

revision date of each module will be printed.

- - - - If help-mode is 'full', then the name, revision date,

prefix, namespace, and source of each module will be printed.

- - objects
    - type: empty
    - usage: mandatory
    - default: none
    - This parameter specifies that information for all available

database objects should be printed:

- - - - If help-mode is 'brief', then the module name and name of

each object will be printed.

- - - - If help-mode is 'normal', then the YANG object type, object

name, and YANG base type will be printed.
If help-mode is 'full', then brief help text will be printed for every object.

- - system
    - type: empty
    - usage: mandatory
    - default: none
    - This parameter specifies that information for all system variables

should be printed.

- - - - The help-mode parameter has no affect on this command.
  - var
    - type: string
    - usage: mandatory
    - default: none
    - This parameter specifies the name of any variable to show

information for.

- - - - If help-mode is 'brief', then the name, variable object, and

type of the variable object will be printed.

- - - - If help-mode is 'normal' or 'full', then the contents of the

specified variable will be printed.

- - vars
    - type: empty
    - usage: mandatory
    - default: none
    - This parameter specifies that information for all variables should

be printed. This includes all CLI, read-only system, read-write system, global user, and local user variables.

- - - - If help-mode is 'brief', then the name, variable object, and

type of each variable object will be printed.

- - - - If help-mode is 'normal' or 'full', then the contents of

each variable will be printed.

- - version
    - type: empty
    - usage: mandatory
    - default: none
    - This parameter specifies that the yangcli program version string

should be printed.

- - - - The help-mode parameter has no affect in this mode.

Positive Response:

the server prints the requested information

Negative Response:

An error message will be printed if errors are detected.

Usage:

    yangcli andy@myserver> show modules

      nc:netconf/2009-04-10 
      inet:ietf-inet-types/2009-05-13 
      ns:ietf-netconf-monitoring/2009-03-03 
      wd:ietf-with-defaults/2009-04-10 
      yang:ietf-yang-types/2009-05-13 
      nacm:nacm/2009-05-13 
      manageEvent:nc-notifications/2008-07-14 
      ncx:ncx/2009-06-12 
      ncxapp:ncx-app-common/2009-04-10 
      nt:ncxtypes/2008-07-20 
      nd:netconfd/2009-05-28 
      ncEvent:notifications/2008-07-14 
      sys:system/2009-06-04 
      t:test/2009-06-10

    yangcli andy@myserver>

shutdown

The shutdown command is used to shut down the NETCONF server.

This command is only supported by the netconfd server.

The default access control configuration for netconfd will not allow any user except the designated 'superuser' account to invoke this command. Refer to the netconfd user manual for details on configuring access control.

shutdown command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	remote
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| status
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yuma-system.yang

Positive Response:

the server will drop all sessions and terminate.

Negative Response:

An error message will be printed if errors are detected locally.
An <rpc-error> message will be printed if the server detected an error.

Usage:

    yangcli andy@myserver> shutdown

    ses: session 10 shut by remote peer

    yangcli>

start-timer

The start-timer command is used to start a timer to do simple performance measurements.

It is used along with the stop-timer command.

start-timer command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	local
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| id
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 2
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| status
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yangcli.yang
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Capabilities needed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Capabilities optional:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| none

Command Parameters:

id
- type: number
- usage: mandatory
- default: 0
- This parameter specifies the numeric ID of the timer.It is a number

in the range 0 to 15.

restart-ok
- type: boolean
- usage: optional
- default: true
- Indicates whether the timer will be used if it is already running. If

'true', the timer will be restarted if it is already running. If 'false', an error will occur if the timer is already running.

Positive Response:

the client prints OK

Negative Response:

An error message will be printed if errors are detected locally.

Usage:

    yangcli andy@myserver> start-timer 1

OK

    yangcli andy@myserver>

stop-timer

The stop-timer command is used to stop a timer to do simple performance measurements.

It is used along with the start-timer command.

stop-timer command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	local
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| id
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 2
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| data
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yangcli.yang
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Capabilities needed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Capabilities optional:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| none

Command Parameters:

id
- type: number
- usage: mandatory
- default: 0
- This parameter specifies the numeric ID of the timer.It is a number

in the range 0 to 15.

echo
- type: boolean
- usage: optional
- default: true
- Indicates whether the delta result should be printed to the log.

Positive Response:

data: the elapsed time is returned and can be used in assignment

statements

Negative Response:

An error message will be printed if errors are detected locally.

Usage:

    yangcli andy@myserver> $time = stop-timer 1

    Elapsed time: 2.003345 seconds

    yangcli andy@myserver>

unlock

The unlock command is used to request a global lock on a NETCONF database. It is used, along with the lock command, to obtain exclusive write access to the NETCONF server.

unlock command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	remote
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| status
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yuma-netconf.yang
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Capabilities needed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Capabilities optional:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| :candidate:startup:url

Command Parameters:

target
- type: container with 1 of N choice of leafs
- usage: mandatory
- default: none
- This parameter specifies the name of the target database to be

locked.

- container contents: 1 of N:
  - candidate
    - type: empty
    - capabilities needed: :candidate
  - running
    - type: empty
    - capabilities needed: none
  - startup
    - type: empty
    - capabilities needed: startup
  - url
    - type: yang:uri
    - capabilities needed: :url, and the scheme used in the URL must be

specified in the :url capability 'schemes' parameter.

- - - To enter this parameter, the interactive mode must be used. The

shorthand mode (target=url) cannot be used, since this parameter contains a string.

Positive Response:

the server returns <ok/>

Negative Response:

An error message will be printed if errors are detected locally.
An <rpc-error> message will be printed if the server detected an error.

Usage:

    yangcli andy@myserver> unlock target=candidate

    RPC OK Reply 38 for session 10:

    yangcli andy@myserver>

unset

The unset command is used to delete a command alias from memory.

unset command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	local
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| name
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| status
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yangcli.yang

Command Parameters:

name
- type: string
- usage: mandatory
- default: none
- This parameter specifies the name of the command alias to delete.

Positive Response:

Deleted alias 'foo' is printed, where 'foo' is the name parameter

string

Negative Response:

An error message will be printed.
An <rpc-error> message will be printed if the server detected an error.

Usage:

    yangcli andy> unset get-running

    Deleted alias 'get-running'

    yangcli andy>

uservars

The uservars command is used to clear, load, or save the global user variables.

uservars command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	local
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| status
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yangcli.yang

Command Parameters:

uservars-action
- type: choice
- usage: mandatory
- default: none
- clear:
  - Delete all global user variables from memory
- load [uservars-filespec]
  - Load global user variables into memory from an XML file.If the

'uservars-filespec' parameter is missing, then the default file($HOME/.yuma/yangcli_uservars.xml) will be used.

- save [uservars-filespec]
  - Save the global user variables from memory into an XML file.If the

'uservars-filespec' parameter is missing, then the default file($HOME/.yuma/yangcli_uservars.xml) will be used.

Positive Response:

A status message is printed.

Negative Response:

An error message will be printed.

Usage:

    yangcli andy> uservars clear

    Deleted all global user variables from memory

    yangcli andy>

validate

The validate command is used to check if a complete NETCONF database is valid or not.

The :validate capability must be supported by the server to use this command.

validate command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	remote
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| status
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yuma-netconf.yang
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Capabilities needed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| :validate
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Capabilities optional:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| :candidate:startup:url

Command Parameters:

target
- type: container with 1 of N choice of leafs
- usage: mandatory
- default: none
- This parameter specifies the name of the target database to be

validated.

- container contents: 1 of N:
  - candidate
    - type: empty
    - capabilities needed: :candidate
  - running
    - type: empty
    - capabilities needed: none
  - startup
    - type: empty
    - capabilities needed: startup
  - url
    - type: yang:uri
    - capabilities needed: :url, and the scheme used in the URL must be

specified in the :url capability 'schemes' parameter.

- - - To enter this parameter, the interactive mode must be used. The

shorthand mode (target=url) cannot be used, since this parameter contains a string.

- - config
    - type: anyxml
    - capabilities
    - This parameter represents an entire database, using the in-line

config form, similar to the edit-config command, except this config parameter contains no nc:operation attributes and must be a complete database, not a subset.

Positive Response:

the server returns <ok/>

Negative Response:

An error message will be printed if errors are detected locally.
An <rpc-error> message will be printed if the server detected an error.

Usage:

    yangcli andy@myserver> validate source=candidate

    RPC OK Reply 36 for session 10:

    yangcli andy@myserver>

while

The while command is used to start a conditional loop command block.

The expr parameter is used to specify the XPath expression to test if the while conditional loop block is true or false. A false block will be skipped and a true block will be executed. The command prompt will contain the string '[F]' while inside a false conditional block in interactive mode. This expression string should be entered with quotes to avoid misinterpreting any whitespace or special characters.

The docroot parameter (if present) specifies the XML document that the 'expr' parameter should be evaluated against. This is optional, since only XPath path expressions need to refer to a document.

If the 'expr' expression is true, the conditional block will be executed, and no further conditional blocks within the same if command sequence will be executed.

The maxloops parameter specifies the maximum number of iterations that should be allowed, even if the expression continues to evaluate to 'true'. This allows constant expressions to be used to construct a simple 'for' loop.

while command

...

end command

while command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	local
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| expr
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 3
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| status
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yangcli.yang

Command Parameters:

expr
- type: XPath expression string
- usage: mandatory
- default: none
- This parameter specifies the XPath expression to determine if the

following commands are within a true or false conditional block.

docroot
- type: anyxml
- usage: optional (typically a variable reference is used)
- default: none
- This parameter specifies the XML document that should be used if the

expr XPath expression references any path nodes.

maxloops
- type: uint32
- usage: optional
- default: 65535
- Set a maximum number of loops that can be iterated for this while

command. The value zero means that no maximum will be enforced. Use this mode with caution.

Positive Response:

the server returns <ok/>

Negative Response:

An error message will be printed if errors are detected locally.
- invalid XPath expression or invalid docroot reference will cause an

error

Usage:

    yangcli andy@myserver> while 1 --maxloops=10

    yangcli andy@myserver> while '$x <
10'

    yangcli andy@myserver>

xget

The xget command is used to invoke a NETCONF <get> operation with an XPath filter.

xget command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	remote
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| select
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 3
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| data
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yangcli.yang
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Capabilities needed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Capabilities optional:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| :with-defaults

Command Parameters:

choice 'from' (not entered)
- type: choice of case 'varref' or case 'select'
- usage: mandatory
- default: none
- This parameter specifies the where yangcli should get the data from, for the XPath filter target of the <get> operation. It is an XPath expression, either contained in a user variable

or directly from the select parameter.

- - varref
    - type: string
    - usage: mandatory
    - default: none
    - This parameter specifies the name of the user variable the contains the XPath expression for the XPath filter in the <get> operation. The parameter must exist (e.g., created with an

assignment statement) or an error message will be printed.

- - select
    - type: string
    - usage: mandatory
    - default: none
    - This parameter specifies the XPath expression to use for the XPath filter in the <get> operation.
timeout
- type: uint32 (0 = no timeout, otherwise the number of seconds to

wait)

- usage: optional
- default: set to the $$timeout system variable, default 30

seconds

- This parameter specifies the number of seconds to wait for a response

from the server before giving up. The session will not be dropped if a remote command times out, but any late response will be dropped. A value of zero means no timeout should be used, and yangcli will wait forever for a response.

with-defaults
- type: enumeration (none report-all report-all-tagged trim explicit)
- usage: optional
- default: none
- capabilities needed: with-defaults
- This parameter controls how nodes containing only default values are returned in the <rpc-reply>.

System Variables:

$$timeout
- The response timeout interval will be derived from this system

variable.

$$with-defaults
- The <with-defaults> parameter for the <get> operation will be derived from this system variable.

Positive Response:

the server returns <data>

Negative Response:

An error message will be printed if errors are detected locally.
An <rpc-error> message will be printed if the server detected an error.

Output:

data
- type: anyxml
- This element will contain the requested data from the

<running> database or non-config data structures.

Usage:

    yangcli andy@myserver> xget //name

    RPC Data Reply 42 for session 10:

    rpc-reply { 
       data { 
          nacm { 
             rules { 
                data-rule nacm-tree { 
                   name nacm-tree 
                } 
             } 
          } 
          xpath.1 { 
             name barney 
          } 
          netconf-state { 
             datastores { 
                datastore { 
                   name { 
                      candidate 
                   } 
                } 
             } 
          } 
          netconf { 
             streams { 
                stream NETCONF { 
                   name NETCONF 
                } 
             } 
          } 
       } 
       } 
    }

    yangcli andy@myserver>

Reference:

RFC 4741, section 7.7

xget-config

The xget-config command is used to invoke a NETCONF <get-config> operation with an XPath filter.

xget-config command

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Command type:	remote
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Default parameter:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| select
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Min parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 2
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Max parameters:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| 4
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Return type:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| data
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| YANG file:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| yangcli.yang
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Capabilities needed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0403in;"\| Capabilities optional:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0403in;"\| :candidate:startup:url:with-defaults

Command Parameters:

choice 'from' (not entered)
- type: choice of case 'varref' or case 'select'
- usage: mandatory
- default: none
- This parameter specifies the where yangcli should get the data from, for the XPath filter target of the <get-config> operation. It is an XPath expression, either contained in a

user variable or directly from the select parameter.

- - varref
    - type: string
    - usage: mandatory
    - default: none
    - This parameter specifies the name of the user variable the contains the XPath expression for the XPath filter in the <get-config> operation. The parameter must exist (e.g., created with an

assignment statement) or an error message will be printed.

- - select
    - type: string
    - usage: mandatory
    - default: none
    - This parameter specifies the XPath expression to use for the XPath filter in the <get-config> operation.
source
- type: container with 1 of N choice of leafs
- usage: mandatory
- default: none
- This parameter specifies the name of the source database for the

retrieval operation.

- container contents: 1 of N:
  - candidate
    - type: empty
    - capabilities needed: :candidate
  - running
    - type: empty
    - capabilities needed: none
  - startup
    - type: empty
    - capabilities needed: startup
  - url
    - type: yang:uri
    - capabilities needed: :url, and the scheme used in the URL must be

specified in the :url capability 'schemes' parameter

- - - To enter this parameter, the interactive mode must be used. The

shorthand mode (source=url) cannot be used, since this parameter contains a string.

timeout
- type: uint32 (0 = no timeout, otherwise the number of seconds to

wait)

- usage: optional
- default: set to the $$timeout system variable, default 30

seconds

- This parameter specifies the number of seconds to wait for a response

from the server before giving up. The session will not be dropped if a remote command times out, but any late response will be dropped. A value of zero means no timeout should be used, and yangcli will wait forever for a response.

with-defaults
- type: enumeration (none report-all report-all-tagged trim explicit)
- usage: optional
- default: none
- capabilities needed: with-defaults
- This parameter controls how nodes containing only default values are returned in the <rpc-reply>.

System Variables:

$$timeout
- The response timeout interval will be derived from this system

variable.

$$with-defaults
- The <with-defaults> parameter for the <get-config> operation will be derived from this system variable.

Positive Response:

the server returns <data>

Negative Response:

An error message will be printed if errors are detected locally.
An <rpc-error> message will be printed if the server detected an error.

Output:

data
- type: anyxml
- This element will contain the requested data from the source

database.

Usage:

    yangcli andy@myserver> xget /nacm/groups \
        source=running

    RPC Data Reply 41 for session 10:

    rpc-reply { 
       data { 
          nacm { 
             groups { 
                group nacm:admin { 
                   groupIdentity nacm:admin 
                   userName andy 
                   userName fred 
                   userName barney 
                } 
                group nacm:guest { 
                   groupIdentity nacm:guest 
                   userName guest 
                } 
             } 
          } 
       } 
    }

    yangcli andy@svnserver>

CLI Reference

The Yuma programs uses command line interface (CLI) parameters to control program behavior.

Many parameters are supported by more than one program, such as --log.

The following sections document all the Yuma CLI parameters, in alphabetical order.

--aliases-file

The –aliases-file parameter specifies the yangcli command aliases file specification to use.

--aliases-file parameter

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Syntax	string
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Default:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| $HOME/.yuma/.yangcli_aliases
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Min Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Max Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Supported by:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Example:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli –aliases-file=~/myalaises

--alt-names

The –alt-names parameter controls whether alternative names are searched when processing a UrlPath search.

--alt-names parameter

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Syntax	boolean (true or false)
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Default:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| TRUE
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Min Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Max Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Supported by:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Example:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli --alt-names=false

--autoaliases

The --autoaliases parameter controls automatic loading and saving of the command aliases file.

If 'true', then aliases will be loaded and saved automatically.

If 'false', then aliases must be loaded and saved manually with the 'aliases' command.

--autoaliases parameter

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Syntax	boolean (true or false)
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Default:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| TRUE
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Min Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Max Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Supported by:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Example:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli --autoaliases=false

--autocomp

The --autocomp parameter controls automatic completion of command and parameter names.

If true, then the program will attempt to find a partial match by comparing only the number of characters entered. For example '--log-l=debug' is the same as '--log-level=debug'.

If 'false', then command and parameter names must match exactly.

--autocomp parameter

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Syntax	boolean (true or false)
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Default:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| TRUE
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Min Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Max Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Supported by:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Example:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli --autocomp=false

--autohistory

The --autohistory parameter controls automatic loading and saving of the command line history buffer in the yangcli program..

If true, then when the program starts, the default command line history buffer will be loaded, and the previous set of commands will be available with the history and recall commands.

If 'false', then the command line history buffer will not be loaded and saved automatically.

The default location for this file is ~/.yuma/.yangcli_history.

--autohistory parameter

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Syntax	boolean (true or false)
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Default:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| TRUE
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Min Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Max Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Supported by:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Example:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli --autohistory=false

--autoload

The --autoload parameter controls automatic loading of YANG modules, as needed.

If true, then the program will attempt to find a needed YANG module.

If 'false', then YANG modules must be loaded manually.

--autoload parameter

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Syntax	boolean (true or false)
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Default:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| TRUE
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Min Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Max Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Supported by:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Example:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli --autoload=false

--autouservars

The --autouservars parameter controls automatic loading of global user variables.

If 'true', then the global user variables will be automatically loaded and saved.

If 'false', then the global user variables must be loaded and saved manually with the 'uservars' command.

--autouservars parameter

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Syntax	boolean (true or false)
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Default:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| TRUE
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Min Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Max Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Supported by:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Example:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli --autouservars=false

--bad-data

The --bad-data parameter controls how invalid parameter input is handled by the program.

ignore: Use invalid parameter values. Use with caution.
warn: Issue a warning message, but use the invalid data anyway.
check: Prompt the user interactively, and check if the invalid

data should be used, or a new value re-entered.

error: Do not use invalid parameter values.

--bad-data parameter

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Syntax	enumeration: ignore warn check error
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Default:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| check
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Min Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Max Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Supported by:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Example:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli ----bad-data=warn

--batch-mode

The --batch-mode parameter specifies that the interactive CLI will not be used.

Instead, if a script is provided with the 'run-script' parameter, or a command provided with the 'run-command' parameter, then it will be executed automatically before the program exits. This mode can be used to invoke NETCONF commands from Unix shell scripts.

--batch-mode parameter

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Syntax	empty
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Default:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Min Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Max Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Supported by:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Example:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli --batch-mode \ --run-script=~/run-tests

--config

The --config parameter specifies the name of a Yuma configuration file that contains more parameters to process, in addition to the CLI parameters.

Refer to the 'Configuration Files' section for details on the format of this file.

--config parameter

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Syntax	string: complete file specification of the text file to parse for more parameters.
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Default:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| /etc/yuma/<program-name>.conf
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Min Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Max Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Supported by:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| netconfdyangcliyangdiffyangdump
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Example:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli testmod \ --config=~/testconf.conf

--datapath

The --datapath parameter specifies the directory search path to use while searching for data files. It consists of a colon (':') separated list of path specifications, commonly found in Unix, such as the $PATH environment variable.

This parameter overrides the $YUMA_DATAPATH environment variable, if it is present.

--datapath parameter

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Syntax	string: list of directory specifications
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Default:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| $YUMA_DATAPATH environment variable
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Min Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Max Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Supported by:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| netconfdyangcliyangdiffyangdump
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Example:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli \ --datapath=”~/work2:~/data”

--default-module

The --default-module parameter specifies the module to search for identifiers, after the netconf and ncx modules have been checked. This allows a specific module to match identifier names first, before all modules are searched at once. This can avoid a collision if the same identifier value is used in more than one module.

--default-module parameter

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Syntax	string: module name without any path or file extension included.
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Default:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Min Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Max Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Supported by:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Example:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli --default-module=testmod

--deviation

The --deviation parameter is a leaf-list of modules that should be loaded automatically when the program starts, as a deviation module. In this mode, only the deviation statements are parsed and then made available later when the module that contains the objects being deviated is parsed.

The deviations must be known to the parser before the target module is parsed.

This parameter is used to identify any modules that have deviation statements for the set of modules being parsed (e.g., --module and --subtree parameters).

A module can be listed with both the --module and --deviation parameters, but that is not needed unless the module contains external deviations. If the module only contains deviations for objects in the same module, then the --deviation parameter does not need to be used.

The program will attempt to load each module in deviation parsing mode, in the order the parameters are entered.

For the netconfd program, If any modules have fatal errors then the program will terminate.

For the yangdump and yangcli programs, each module will be processed as requested.

--deviation parameter

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Syntax	module name or filespec
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Default:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Min Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Max Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| unlimited
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Supported by:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| netconfdyangcliyangdump
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Example:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli \ --module=test1 \ --deviation=test1_deviations

--display-mode

The --display-mode parameter controls how data is displayed in the program.

The qualified names (identifiers, idenitityref, XPath) within a text configuration can be generated several ways. This is needed because sibling nodes in different XML namespaces can have the same name.

--display-mode values

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| enum value	style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| description	example
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| plain	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| no prefix, just local-name	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| sysBootError
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| prefix	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| XML prefix and local-name	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| sys:sysBootError
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| module	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| module name and local name	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| system:sysBootError
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| xml	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| XML format	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| <sysBootError xmlns=”foo”>
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| xml-nons	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| XML format without namespace (xmlns) attributes	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| <sysBootError>
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| json	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| JSON format	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| { “sysBootError” : “blah” }

When saving configuration files in non-volatile storage, then it is suggested that only 'module' or 'xml' modes be used, since these are the only deterministic modes.

The set of XML prefixes in use at any one time is not persistent, and cannot be relied upon, unless the namespace declarations are saved (xml mode) or the module names are saved (module mode).

display-mode parameter

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Syntax	enumeration: plain prefix module xml xml-nons json
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Default:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| plain
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Min Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Max Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Supported by:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Example:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli --display-mode=module

--feature-disable

The --feature-disable parameter directs all programs to disable a specific feature.

This parameter is a formatted string containing a module name, followed by a colon ':', followed by a feature name, e.g.,

test:feature1

It is an error if a --feature-enable and --feature-disable parameter specify the same feature.

Parameters for unknown features will be ignored.

--feature-disable parameter

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Syntax	formatted string (module:feature
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Default:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Min Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Max Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| unlimited
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Supported by:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcliyangdiffyangdumpnetconfd
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Example:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli --feature-disable=test:feature1

--feature-enable

The --feature-enable parameter directs all programs to enable a specific feature.

This parameter is a formatted string containing a module name, followed by a colon ':', followed by a feature name, e.g.,

test:feature1

It is an error if a --feature-disable and --feature-enable parameter specify the same feature.

Parameters for unknown features will be ignored.

--feature-enable parameter

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Syntax	formatted string (module:feature
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Default:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Min Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Max Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| unlimited
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Supported by:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcliyangdiffyangdumpnetconfd
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Example:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli--feature-enable=test:feature1

--feature-enable-default

The --feature-enable-default parameter controls how yangdump will generate C code for YANG features by default.

If 'true', then by default, features will be enabled.

If 'false', then by default, features will be disabled.

If a --feature-enable or --feature-disable parameter is present for a specific feature, then this parameter will be ignored for that feature.

--feature-enable-default parameter

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Syntax	boolean (true or false)
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Default:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| TRUE
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Min Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Max Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Supported by:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcliyangdiffyangdumpnetconfd
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Example:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli \ --feature-enable-default=false

--fixorder

The --fixorder parameter controls whether PDU parameters will be automatically sent in NETCONF PDUs in the correct order.

If 'true', the schema-defined, canonical order will be used.

If 'false', the specified order that parameters are entered will be used for the PDU order as well.

--fixorder parameter

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Syntax	boolean (true or false)
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Default:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| TRUE
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Min Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Max Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Supported by:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Example:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli --fixorder=false

--force-target

The --force-target parameter controls whether the candidate or running configuration datastore will be used as the default edit target, when both are supported by the server.

--force-target parameter

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Syntax	enum (candidate or running)
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Default:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| candidate
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Min Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Max Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Supported by:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Example:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli --force-target=running

--help

The --help parameter causes program help text to be printed, and then the program will exit instead of running as normal.

This parameter can be combined with the --help-mode parameter to control the verbosity of the help text. Use --brief for less, and --full for more than the normal verbosity.

This parameter can be combined with the --version parameter in all programs. It can also be combined with the --show-errors parameter in yangdump.

The program configuration parameters will be displayed in alphabetical order, not in schema order.

--help parameter

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Syntax	empty
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Default:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Min Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Max Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Supported by:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| netconfdyangcliyangdiffyangdump
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Example:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli --help

--help-mode

The --help-mode parameter is used to control the amount of detail printed when help text is requested in some command. It is always used with another command, and makes no sense by itself. It is ignored unless used with the --help parameter.

--help-mode parameter

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Syntax	choice of 3 empty leafs --brief --normal --full
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Default:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| normal
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Min Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Max Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Supported by:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| netconfdyangcliyangdiffyangdump
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Example:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli --help --help-mode=full

default choice: normal
choice help-mode
- brief
  - type: empty
  - This parameter specifies that brief documentation mode should be

used.

- normal
  - type: empty
  - This parameter specifies that normal documentation mode should be

used.

- full
  - type: empty
  - This parameter specifies that full documentation mode should be

used.

--indent

The --indent parameter specifies the number of spaces that will be used to add to the indentation level, each time a child node is printed during program operation.

--indent parameter

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Syntax	uint32 (0 .. 9)
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Default:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 3
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Min Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Max Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Supported by:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| netconfdyangcliyangdiffyangdump
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Example:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli --indent=4

--log

The --log parameter specifies the file name to be used for logging program messages, instead of STDOUT. It can be used with the optional --log-append and --log-level parameters to control how the log file is written.

--log parameter

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Syntax	string: log file specification
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Default:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Min Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Max Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Supported by:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| netconfdyangcliyangdiffyangdump
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Example:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli --log=~/test.log&

--log-append

The --log-append parameter specifies that the existing log file (if any) should be appended , instead of deleted. It is ignored unless the --log parameter is present.

--log-append parameter

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Syntax	empty
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Default:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Min Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Max Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Supported by:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| netconfdyangcliyangdiffyangdump
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Example:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli --log-append \ --log=~/test.log&

--log-level

The --log-level parameter controls the verbosity level of messages printed to the log file or STDOUT, if no log file is specified.

The log levels are incremental, meaning that each higher level includes everything from the previous level, plus additional messages.

There are 7 settings that can be used:

none: All logging is suppressed. Use with extreme caution!
error: Error messages are printed, indicating problems that

require attention.

warn: Warning messages are printed, indicating problems that may

require attention.

info: Informational messages are printed, that indicate program

status changes.

debug: Debugging messages are printed that indicate program

activity.

debug2: Protocol debugging and trace messages are enabled.
debug3: Very verbose debugging messages are enabled. This has an

impact on resources and performance, and should be used with caution.

debug4: Maximum debugging messages are enabled.

log-level parameter

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Syntax	enumeration: off error warn info debug debug2 debug3 debug4
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Default:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| --info (--debug for DEBUG builds)
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Min Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Max Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Supported by:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| netconfdyangcliyangdiffyangdump
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Example:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli --log-level=debug \ --log=~/test.log&

--match-names

The --match-names parameter specifies how names are matched when performing UrlPath searches.

The following values are supported::

exact

The name must exactly match the node name for all characters in both name strings.

exact-nocase

The name must match the node name for all characters in both name strings.

Strings are not case-sensitive.

one

The name must exactly match the first N characters of just one node name, which must be the only partial name match found.

one-nocase

The name must exactly match the first N characters of just one node name, which

must be the only partial name match found. Strings are not case-sensitive.

first

The name must exactly match the first N characters of any node name. The first one

found will be used.

first-nocase

The name must exactly match the first N characters of any node name. The first one

found will be used. Strings are not case-sensitive.

--match-names parameter

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Syntax	enum: exact exact-nocase one one-nocase first first-nocase
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Default:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| one-nocase
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Min Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Max Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Supported by:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Example:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli --match-names=exact

--modpath

The --modpath parameter specifies the YANG module search path to use while searching for YANG files. It consists of a colon (':') separated list of path specifications, commonly found in Unix, such as the $PATH environment variable.

This parameter overrides the $YUMA_MODPATH environment variable, if it is present.

--modpath parameter

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Syntax	string: list of directory specifications
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Default:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| $YUMA_MODPATH environment variable
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Min Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Max Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Supported by:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| netconfdyangcliyangdiffyangdump
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Example:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli \ --modpath=”~/testmodules:~/modules:~/trunk/netconf/modules”

--module

The --module parameter is a leaf-list of modules that should be loaded automatically when the program starts.

The program will attempt to load each module in the order the parameters were entered.

For the netconfd program, If any modules have fatal errors then the program will terminate.

For the yangdump program, each module will be processed as requested.

--module parameter

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Syntax	module name or filespec
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Default:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Min Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Max Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| unlimited
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Supported by:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| netconfdyangcliyangdump
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Example:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli \ --module=test1 \ --module=test2

--ncport

The --ncport parameter specifies the TCP port number that should be used for NETCONF sessions.

This parameter specifies the TCP port number to use when a NETCONF session is created during the startup of the program. The parameter can only be entered once.

--ncport parameter

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Syntax	uint32
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Default:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 830
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Min Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Max Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Supported by:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Example:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli --server=myserver --ncport=22 \ --user=fred --password=mypassword

--password

The --password parameter specifies the password string that should be used when a NETCONF session is connected during the startup of the program.

--password parameter

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Syntax	string
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Default:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Min Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Max Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Supported by:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Example:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli --server=myserver \ --password=yangrocks \ --user=andy

--private-key

The --private-key parameter specifies the file path specification for the file containing the client-side private key.

If both 'public-key' and 'private-key' files are present, the client will attempt to connect to the server using these keys. If this fails, or not done, then password authentication will be attempted.

--private-key parameter

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Syntax	string
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Default:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| $HOME/.ssh/id_rsa
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Min Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Max Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Supported by:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Example:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli –private-key=~/.ssh/mykey

--protocols

The --protocols parameter specifies which protocol versions the program or session will attempt to use. Empty set is not allowed.

--protocols parameter

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Syntax	bits
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Default:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| “netconf1.0 netconf1.1”
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Min Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Max Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Supported by:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| netconfdyangcli
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Example:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli –protocols=netconf1.0

--public-key

The --public-key parameter specifies the file path specification for the file containing the client-side public key.

If both 'public-key' and 'private-key' files are present, the client will attempt to connect to the server using these keys. If this fails, or not done, then password authentication will be attempted.

--public-key parameter

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Syntax	string
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Default:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| $HOME/.ssh/id_rsa.pub
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Min Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Max Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Supported by:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Example:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli –public-key=~/.ssh/mykey.pub

--runpath

The --runpath parameter specifies the directory search path to use while searching for script files. It consists of a colon (':') separated list of path specifications, commonly found in Unix, such as the $PATH environment variable.

This parameter overrides the $YUMA_RUNPATH environment variable, if it is present.

--runpath parameter

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Syntax	string: list of directory specifications
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Default:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| $YUMA_RUNPATH environment variable
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Min Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Max Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Supported by:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| netconfdyangcliyangdiffyangdump
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Example:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli \ --runpath=”~/testscripts”

--run-command

The --run-command parameter specifies a command will be invoked upon startup.

In the yangcli program, if the auto-connect parameters are provided, then a session will be established before running the command.

--run-command parameter

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Syntax	string
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Default:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Min Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Max Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Supported by:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Example:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli \ --run-command="history load=~/test3-history"

--run-script

The --run-script parameter specifies a script will be invoked upon startup.

In the yangcli program, if the auto-connect parameters are provided, then a session will be established before running the script.

--run-script parameter

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Syntax	string (file specification)
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Default:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Min Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Max Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Supported by:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Example:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli \ --run-script="test3-start"

--server

The --server parameter specifies the IP address or DNS name of the NETCONF server that should be connected to automatically, when the program starts.

--server parameter

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Syntax	string:IP address or DNS name
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Default:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Min Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Max Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Supported by:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Example:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli --server=myserver

--subdirs

The --subdirs parameter controls whether sub-directories should be searched or not, if they are found during a module search.

If false, the file search paths for modules, scripts, and data files will not include sub-directories if they exist in the specified path.

--subdirs parameter

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Syntax	boolean
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Default:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| TRUE
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Min Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Max Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Supported by:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangdump
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Example:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli --subdirs=false

--time-rpcs

The --time-rpcs parameter is used to measure the round-trip time of each <rpc> request and <rpc-reply> at the session level. Echo the elapsed time value to screen if in interactive mode, as well as the log if the log is a file instead of stdout. The $$time-rpcs system variable is derived from this parameter.";

--time-rpcs parameter

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Syntax	boolean
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Default:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| FALSE
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Min Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Max Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Supported by:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Example:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli --time-rpcs=true

--timeout

The --timeout parameter specifies the number of seconds that should pass before giving up on a response during a NETCONF session. The value zero means wait forever (no timeout).

--timeout parameter

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Syntax	uint32 (0 for no timeout; otherwise number of seconds to wait)
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Default:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 30 seconds
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Min Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Max Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Supported by:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Example:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli --timeout=0

--transport

The --transport parameter specifies the NETCONF transport protocol to use.

This parameter is also supported in the 'connect' command.

There are 2 values supported:

ssh: standard NETCONF SSH transport (RFC 4742 or RFC 6242)
tcp: tail-f NETCONF over TCP transport
Note that netconfd

does not support this transport protocol!

I

--timeout parameter

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Syntax	Enum (ssh or tcp)
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Default:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| ssh
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Min Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Max Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Supported by:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Example:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli --transport=tcp

--use-xmlheader

The --use-xmlheader parameter specifies how file result variables will be written for XML files.

Controls whether the XML preamble header will be written or not.

--use-xmlheader parameter

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Syntax	boolean
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Default:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| TRUE
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Min Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Max Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Supported by:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Example:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli --use-xmlheader=false

--user

The --user parameter specifies the user name string on the NETCONF server that should be used when establishing a NETCONF session.

--user parameter

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Syntax	string:user name
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Default:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Min Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Max Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Supported by:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Example:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli --user=admin \ --server=myserver

--uservars-file

The --uservars-file parameter contains the file specification of the user global variables XML file to use.

--uservars-file parameter

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Syntax	string:filespec
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Default:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| $HOME/.yuma/yangcli_uservars.xml
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Min Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Max Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Supported by:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Example:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli –uservars-file=~/myvars.xml

--version

The --version parameter causes the program version string to be printed, and then the program will exit instead of running as normal.

All Yuma version strings use the same format:

DEBUG: <major>.<minor>.<svn-build-version>

or

NON-DEBUG: <major>.<minor>-<release>

An example version number that may be printed:

    yangcli 1.15-4

This parameter can be combined with the --help parameter.

--version parameter

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Syntax	empty
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Default:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Min Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Max Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Supported by:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| netconfdyangcliyangdiffyangdump
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Example:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli --version

--warn-idlen

The --warn-idlen parameter controls whether identifier length warnings will be generated.

The value zero disables all identifier length checking. If non-zero, then a warning will be generated if an identifier is defined which has a length is greater than this amount.

--warn-idlen parameter

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Syntax	uint32: 0 to disable, or 8 .. 1023
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Default:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 64
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Min Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Max Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Supported by:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| netconfdyangcliyangdiffyangdump
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Example:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli --warn-idlen=50

--warn-linelen

The --warn-linelen parameter controls whether line length warnings will be generated.

The value zero disables all line length checking. If non-zero, then a warning will be generated if a YANG file line is entered which has a length is greater than this amount.

Tab characters are counted as 8 spaces.

--warn-linelen parameter

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Syntax	uint32: 0 to disable, or 40 .. 4095
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Default:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 72
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Min Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Max Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Supported by:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| netconfdyangcliyangdiffyangdump
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Example:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli --warn-linelen=79

--warn-off

The --warn-off parameter suppresses a specific warning number.

The error and warning numbers, and the default messages, can be viewed with the yangdump program by using the --show-errors configuration parameter.

The specific warning message will be disabled for all modules. No message will be printed and the warning will not count towards the total for that module.

--warn-off parameter

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Syntax	uint32: 400 .. 899
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Default:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| none
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Min Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Max Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 499
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Supported by:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| netconfdyangcliyangdiffyangdump
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Example:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli --warn-off=435 # revision order not descending

--yuma-home

The --yuma-home parameter specifies the project directory root to use when searching for files.

If present, this directory location will override the '$YUMA_HOME environment variable, if it is set. If this parameter is set to a zero-length string, then the $YUMA_HOME environment variable will be ignored.

The following directories are searched when either the $YUMA_HOME environment variable or this parameter is set:

$YUMA_HOME/modules
- This sub-tree is searched for YANG files.
$YUMA_HOME/data
- This directory is searched for data files.
$YUMA_HOME/scripts
- This directory is searched for yangcli script files.

yuma-home parameter

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Syntax	string: directory specification
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Default:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| $YUMA_HOME environment variable
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Min Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 0
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Max Allowed:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| 1
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Supported by:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| netconfdyangcliyangdiffyangdump
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| Example:	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| yangcli \ --yuma-home=~/sw/netconf \ --log=~/test.log&

Convention	Description
style="border-top:none;border-bottom:0.05pt solid 000000;border-left:0.05pt solid 000000;border-right:none;padding:0.0382in;"\| --foo	style="border-top:none;border-bottom:0.05pt solid 000000;border-left:0.05pt solid #000000;border-right:0.05pt solid 000000;padding:0.0382in;"\| CLI parameter foo
style="border-top:none;border-bottom:0.05pt solid 000000;border-left:0.05pt solid 000000;border-right:none;padding:0.0382in;"\| <foo>	style="border-top:none;border-bottom:0.05pt solid 000000;border-left:0.05pt solid #000000;border-right:0.05pt solid 000000;padding:0.0382in;"\| XML parameter foo
style="border-top:none;border-bottom:0.05pt solid 000000;border-left:0.05pt solid 000000;border-right:none;padding:0.0382in;"\| foo	style="border-top:none;border-bottom:0.05pt solid 000000;border-left:0.05pt solid #000000;border-right:0.05pt solid 000000;padding:0.0382in;"\| yangcli command or parameter
style="border-top:none;border-bottom:0.05pt solid 000000;border-left:0.05pt solid 000000;border-right:none;padding:0.0382in;"\| $FOO	style="border-top:none;border-bottom:0.05pt solid 000000;border-left:0.05pt solid #000000;border-right:0.05pt solid 000000;padding:0.0382in;"\| Environment variable FOO
style="border-top:none;border-bottom:0.05pt solid 000000;border-left:0.05pt solid 000000;border-right:none;padding:0.0382in;"\| $$foo	style="border-top:none;border-bottom:0.05pt solid 000000;border-left:0.05pt solid #000000;border-right:0.05pt solid 000000;padding:0.0382in;"\| yangcli global variable foo
style="border-top:none;border-bottom:0.05pt solid 000000;border-left:0.05pt solid 000000;border-right:none;padding:0.0382in;"\| some text	style="border-top:none;border-bottom:0.05pt solid 000000;border-left:0.05pt solid #000000;border-right:0.05pt solid 000000;padding:0.0382in;"\| Example command or PDU
style="border-top:none;border-bottom:0.05pt solid 000000;border-left:0.05pt solid 000000;border-right:none;padding:0.0382in;"\| some text	style="border-top:none;border-bottom:0.05pt solid 000000;border-left:0.05pt solid #000000;border-right:0.05pt solid 000000;padding:0.0382in;"\| Plain text

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| type	style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| description	example
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| command	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| invoke a local command and/or send an <rpc> to the server	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| sget /system
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| variable assignment	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| set a user variable to some value	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| $system = sget /system
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| file assignment	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| set the contents of a file to some value	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| @save.txt = $system
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| variable deletion	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| delete a user variable or clear a system variable	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| $system =

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| command	description
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| create	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| Invoke an <edit-config> create operation
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| delete	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| Invoke an <edit-config> delete operation
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| get-locks	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| Lock all the databases with the <lock> operation
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| insert	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| Invoke an <edit-config> YANG insert operation
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| merge	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| Invoke an <edit-config> merge operation
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| release-locks	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| Unlock all the locked databases with the <unlock> operation
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| remove	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| Invoke an <edit-config> remove operation
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| replace	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| Invoke an <edit-config> replace operation
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| save	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| Save the current edits on the server in NV-storage
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| sget	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| Invoke a <get> operation with a subtree filter
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| sget-config	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| Invoke a <get-config> operation with a subtree filter
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| xget	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| Invoke a <get> operation with an XPath filter
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| xget-config	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| Invoke a <get-config> operation with an XPath filter

@@ Line 17: / Line 17: @@
 == Additional Resources ==
-This document assumes you have successfully set up the software as described in the printed document:
+This document assumes you have successfully set up the software as
+described in the printed document:
@@ Line 35: / Line 36: @@
 [[Yuma Developer Manual]]
-There are several sources of free information and tools for use with YANG and/or NETCONF.
+There are several sources of free information and tools for use with
+YANG and/or NETCONF.
 The following section lists the resources available at this time.
@@ Line 43: / Line 45: @@
 ** [http://www.netconfcentral.org/ http://www.netconfcentral.org/]
 ** Yuma Home Page
-*** Free information on NETCONF and YANG, tutorials, on-line YANG module validation and documentation database
+*** Free information on NETCONF and YANG, tutorials, on-line YANG module
+validation and documentation database
 * '''Yuma SourceFource OpenSource Project'''
-** [http://sourceforge.net/projects/yuma/ http://sourceforge.net/projects/yuma/]
+** [http://sourceforge.net/projects/yuma/
+http://sourceforge.net/projects/yuma/]
 *** Download Yuma source and binaries; project forums and help
 * '''Yang Central'''
@@ Line 51: / Line 55: @@
 ** Free information and tutorials on YANG, free YANG tools for download
 * '''NETCONF Working Group Wiki Page'''
-** [http://trac.tools.ietf.org/wg/netconf/trac/wiki http://trac.tools.ietf.org/wg/netconf/trac/wiki]
+** [http://trac.tools.ietf.org/wg/netconf/trac/wiki
+http://trac.tools.ietf.org/wg/netconf/trac/wiki]
-** Free information on NETCONF standardization activities and NETCONF implementations
+** Free information on NETCONF standardization activities and NETCONF
+implementations
 * '''NETCONF WG Status Page'''
 ** http://tools.ietf.org/wg/netconf/
 ** IETF Internet draft status for NETCONF documents
 * '''libsmi Home Page'''
-** [http://www.ibr.cs.tu-bs.de/projects/libsmi/ http://www.ibr.cs.tu-bs.de/projects/libsmi/]
+** [http://www.ibr.cs.tu-bs.de/projects/libsmi/
+http://www.ibr.cs.tu-bs.de/projects/libsmi/]
 ** Free tools such as smidump, to convert SMIv2 to YANG
 * '''YumaWorks'''
 ** [http://www.yumaworks.com/ http://www.yumaworks.com]
 ** Offers support, training, and consulting for Yuma.
-** Offers YumaPro, a professional version of Yuma that includes concurrency, external database support, sub-agent support, multiple northbound interfaces, and more. API compatible with Yuma. Availability: September, 2012. Licensed.
+** Offers YumaPro, a professional version of Yuma that includes
+concurrency, external database support, sub-agent support, multiple
+northbound interfaces, and more. API compatible with Yuma. Availability:
+September, 2012. Licensed.
 * '''Transpacket'''
 ** [http://www.transpacket.com/ http://www.transpacket.com]
-** Offers Linux based embedded operating system distribution which uses Yuma for configuration and monitoring.
+** Offers Linux based embedded operating system distribution which uses
+Yuma for configuration and monitoring.
 ** Offers support, training, and consulting for YANG and netconf.
 === Mailing Lists ===
 * '''NETCONF Working Group'''
 ** http://www.ietf.org/html.charters/netconf-charter.html
-** Technical issues related to the NETCONF protocol are discussed on the NETCONF WG mailing list. Refer to the instructions on the WEB page for joining the mailing list.
+** Technical issues related to the NETCONF protocol are discussed on the
+NETCONF WG mailing list. Refer to the instructions on the WEB page for
+joining the mailing list.
 * '''NETMOD Working Group'''
-** [http://www.ietf.org/html.charters/netmod-charter.html http://www.ietf.org/html.charters/netmod-charter.html]
+** [http://www.ietf.org/html.charters/netmod-charter.html
+http://www.ietf.org/html.charters/netmod-charter.html]
-** Technical issues related to the YANG language and YANG data types are discussed on the NETMOD WG mailing list. Refer to the instructions on the WEB page for joining the mailing list.
+** Technical issues related to the YANG language and YANG data types are
+discussed on the NETMOD WG mailing list. Refer to the instructions on
+the WEB page for joining the mailing list.
 == Conventions Used in this Document ==
@@ Line 82: / Line 98: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
 ! <center>Convention</center>
 ! <center>Description</center>
 |-
-| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.0382in;"| '''--foo'''
+| style="border-top:none;border-bottom:0.05pt solid
+#000000;border-left:0.05pt solid
-| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.0382in;"| CLI parameter foo
+#000000;border-right:none;padding:0.0382in;"| '''--foo'''
+| style="border-top:none;border-bottom:0.05pt solid
+#000000;border-left:0.05pt solid #000000;border-right:0.05pt solid
+#000000;padding:0.0382in;"| CLI parameter foo
 |-
-| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.0382in;"| '''<nowiki><foo></nowiki>'''
+| style="border-top:none;border-bottom:0.05pt solid
+#000000;border-left:0.05pt solid
-| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.0382in;"| XML parameter foo
+#000000;border-right:none;padding:0.0382in;"|
+'''<nowiki><foo></nowiki>'''
+| style="border-top:none;border-bottom:0.05pt solid
+#000000;border-left:0.05pt solid #000000;border-right:0.05pt solid
+#000000;padding:0.0382in;"| XML parameter foo
 |-
-| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.0382in;"| '''foo'''
+| style="border-top:none;border-bottom:0.05pt solid
+#000000;border-left:0.05pt solid
-| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.0382in;"| '''yangcli''' command or parameter
+#000000;border-right:none;padding:0.0382in;"| '''foo'''
+| style="border-top:none;border-bottom:0.05pt solid
+#000000;border-left:0.05pt solid #000000;border-right:0.05pt solid
+#000000;padding:0.0382in;"| '''yangcli''' command or parameter
 |-
-| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.0382in;"| '''$FOO'''
+| style="border-top:none;border-bottom:0.05pt solid
+#000000;border-left:0.05pt solid
-| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.0382in;"| Environment variable FOO
+#000000;border-right:none;padding:0.0382in;"| '''$FOO'''
+| style="border-top:none;border-bottom:0.05pt solid
+#000000;border-left:0.05pt solid #000000;border-right:0.05pt solid
+#000000;padding:0.0382in;"| Environment variable FOO
 |-
-| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.0382in;"| '''$$foo'''
+| style="border-top:none;border-bottom:0.05pt solid
+#000000;border-left:0.05pt solid
-| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.0382in;"| '''yangcli''' global variable foo
+#000000;border-right:none;padding:0.0382in;"| '''$$foo'''
+| style="border-top:none;border-bottom:0.05pt solid
+#000000;border-left:0.05pt solid #000000;border-right:0.05pt solid
+#000000;padding:0.0382in;"| '''yangcli''' global variable foo
 |-
-| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.0382in;"|  some text
+| style="border-top:none;border-bottom:0.05pt solid
+#000000;border-left:0.05pt solid
-| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.0382in;"| Example command or PDU
+#000000;border-right:none;padding:0.0382in;"|  some text
+| style="border-top:none;border-bottom:0.05pt solid
+#000000;border-left:0.05pt solid #000000;border-right:0.05pt solid
+#000000;padding:0.0382in;"| Example command or PDU
 |-
-| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.0382in;"| some text
+| style="border-top:none;border-bottom:0.05pt solid
-| style="border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.0382in;"| Plain text
+#000000;border-left:0.05pt solid
+#000000;border-right:none;padding:0.0382in;"| some text
+| style="border-top:none;border-bottom:0.05pt solid
+#000000;border-left:0.05pt solid #000000;border-right:0.05pt solid
+#000000;padding:0.0382in;"| Plain text
 |}
@@ Line 121: / Line 166: @@
 == Introduction ==
-The '''yangcli''' program is a NETCONF over SSH client application. It is driven directly by YANG modules, and provides a simple but powerful application interface for any YANG file. There is no configuration required at all to use any YANG file, although there are some YANG extensions that will be utilized if present.
+The '''yangcli''' program is a NETCONF over SSH client application. It
+is driven directly by YANG modules, and provides a simple but powerful
+application interface for any YANG file. There is no configuration
+required at all to use any YANG file, although there are some YANG
+extensions that will be utilized if present.
 === Features ===
 The '''yangcli''' client has the following features:
-* <nowiki>Automatic support for all NETCONF protocol operations, including several 'short-hand' commands for the most common operations, like <edit-config> and <get-config>.</nowiki>
+* <nowiki>Automatic support for all NETCONF protocol operations,
+including several 'short-hand' commands for the most common operations,
-* Automated database locking, unlocking and error cleanup, using the high-level''' get-locks''' and '''release-locks''' commands.
+like <edit-config> and <get-config>.</nowiki>
-* <nowiki>Automatic, standards-based, server schema synchronization, using the YANG module capability URI information in the <hello> PDU, and the <get-schema> operation:</nowiki>
+* Automated database locking, unlocking and error cleanup, using the
-** For each session, the exact view of the server schema definition tree is created, based on the module capability:
+high-level''' get-locks''' and '''release-locks''' commands.
+* <nowiki>Automatic, standards-based, server schema synchronization,
+using the YANG module capability URI information in the <hello> PDU, and
+the <get-schema> operation:</nowiki>
+** For each session, the exact view of the server schema definition tree
+is created, based on the module capability:
 *** module namespace
 *** module name
@@ Line 135: / Line 190: @@
 *** enabled features
 *** names of any modules that contain deviations for this module
-** The help text and parameter validation for each session will be tailored to the capabilities advertised by the server.
+** The help text and parameter validation for each session will be
+tailored to the capabilities advertised by the server.
-** Parses each potential matching YANG file to make sure the module name, revision date, and namespace URI value are all exactly the same as the values in the module capability URI.
+** Parses each potential matching YANG file to make sure the module
-* Understands all NETCONF protocol capabilities, and complex hard-wired logic simplifies protocol usage, and allows high-level commands to pick appropriate defaults for many RPC operation parameters.
+name, revision date, and namespace URI value are all exactly the same as
-* Load any YANG module at boot-time or run-time and start using it immediately.
+the values in the module capability URI.
+* Understands all NETCONF protocol capabilities, and complex hard-wired
+logic simplifies protocol usage, and allows high-level commands to pick
+appropriate defaults for many RPC operation parameters.
+* Load any YANG module at boot-time or run-time and start using it
+immediately.
 * Full concurrent support for multiple revisions of the same module.
 * Supports NETCONF notifications, including :interleave capability.
 * Full XPath 1.0 and subtree filtering support.
-* Automatic support for all YANG language mechanisms, including extensions.
+* Automatic support for all YANG language mechanisms, including
+extensions.
-* Any YANG '''<nowiki><rpc></nowiki>''' operation is automatically available as a '''yangcli''' command.
+* Any YANG '''<nowiki><rpc></nowiki>''' operation is automatically
-* Uses YANG files directly as input, so no pre-processing or configuration needed to use a new module.
+available as a '''yangcli''' command.
-* Can be called from '''unix''' scripts in 'batch-mode' to automatically establish a NETCONF session, issue a command or invoke a yangcli script, close the session, and return the results.
+* Uses YANG files directly as input, so no pre-processing or
-* Extensive interactive shell environment, including user variables, file variables, smart parameter set completion, and a simple scripting environment for automatic operation.
+configuration needed to use a new module.
+* Can be called from '''unix''' scripts in 'batch-mode' to automatically
+establish a NETCONF session, issue a command or invoke a yangcli script,
+close the session, and return the results.
+* Extensive interactive shell environment, including user variables,
+file variables, smart parameter set completion, and a simple scripting
+environment for automatic operation.
 * Automatic, context-sensitive (tab key) command-line completion.
-* Full support for XPath, instance-identifier, leafref, and identityref parameters.
+* Full support for XPath, instance-identifier, leafref, and identityref
+parameters.
-* Automatic, context-sensitive help system, based completely on YANG files and using the exact modules supported by the current NETCONF session, if connected.
+* Automatic, context-sensitive help system, based completely on YANG
-* Full, customizable command line editing, using '''emacs''' by default, but '''vi''' or a custom set of keystroke bindings are also supported.
+files and using the exact modules supported by the current NETCONF
+session, if connected.
+* Full, customizable command line editing, using '''emacs''' by default,
+but '''vi''' or a custom set of keystroke bindings are also supported.
 * Command line history and command recall.
 * Store and recall command line history files for later use.
-* <nowiki>Automatic NETCONF session management, including support for all YANG extensions to the <capability> element.</nowiki>
+* <nowiki>Automatic NETCONF session management, including support for
+all YANG extensions to the <capability> element.</nowiki>
-* Automatic recognition and support for all NETCONF 'capability' related operations.
-* Automatic support for all YANG additions to the NETCONF protocol, such as the '''insert''' operation
+* Automatic recognition and support for all NETCONF 'capability' related
+operations.
-* Unlimited nested scripts with up to 10 parameters each can automate testing and other management tasks
+* Automatic support for all YANG additions to the NETCONF protocol, such
+as the '''insert''' operation
+* Unlimited nested scripts with up to 10 parameters each can automate
+testing and other management tasks
 * User configurable command aliases that can be saved and restored.
 === Starting yangcli ===
-The current working directory in use when '''yangcli''' is invoked is important. It is most convenient to run '''yangcli''' from a work directory, rather than the installation directory or within the module library.
+The current working directory in use when '''yangcli''' is invoked is
+important. It is most convenient to run '''yangcli''' from a work
+directory, rather than the installation directory or within the module
+library.
 The '''yangcli''' program can be invoked several ways:
@@ Line 190: / Line 269: @@
-* To start an interactive session and append to an existing log file:<br/>
+* To start an interactive session and append to an existing log
+file:<br/>
-         '''yangcli'' --''logfile''<nowiki>=mylogfile </nowiki>''--log-append'''
+         '''yangcli'' --''logfile''<nowiki>=mylogfile
+</nowiki>''--log-append'''
@@ Line 202: / Line 283: @@
-* To begin to connect to a server upon startup, provide the '''--server''' parameter. The '''connect''' command will be started upon startup and the user will be prompted to enter the rest of the mandatory parameters to the '''connect''' command.<br/>
+* To begin to connect to a server upon startup, provide the
+'''--server''' parameter. The '''connect''' command will be started upon
+startup and the user will be prompted to enter the rest of the mandatory
+parameters to the '''connect''' command.<br/>
@@ Line 208: / Line 292: @@
+* To connect to a server and automatically connect without any
-* To connect to a server and automatically connect without any interactive interruption, enter the '''--server''', '''--user''', and '''--password''' parameters. A session startup will be attempted right away, using these parameters. Any optional parameters for the '''connect''' command ('''--port''' or '''--timeout''') may be entered as well. All parameters can be entered from a config file, and/or the command line.<br/>
+interactive interruption, enter the '''--server''', '''--user''', and
+'''--password''' parameters. A session startup will be attempted right
+away, using these parameters. Any optional parameters for the
+'''connect''' command ('''--port''' or '''--timeout''') may be entered
+as well. All parameters can be entered from a config file, and/or the
+command line.<br/>
@@ Line 215: / Line 305: @@
-* To automatically connect to a server, run a script in non-interactive mode, and then remain connected to the server, add the '''--run-script''' parameter to the connection parameters. The '''--runpath''' parameter can also be entered, if needed.<br/>
+* To automatically connect to a server, run a script in non-interactive
+mode, and then remain connected to the server, add the
+'''--run-script''' parameter to the connection parameters. The
+'''--runpath''' parameter can also be entered, if needed.<br/>
@@ Line 223: / Line 316: @@
-* To automatically connect to a server, run a script in non-interactive mode, and then exit the program, add the '''--batch-mode''' and '''--run-script''' parameters to the connection parameters. The '''--runpath''' parameter can also be entered, if needed.<br/>
+* To automatically connect to a server, run a script in non-interactive
+mode, and then exit the program, add the '''--batch-mode''' and
+'''--run-script''' parameters to the connection parameters. The
+'''--runpath''' parameter can also be entered, if needed.<br/>
@@ Line 231: / Line 327: @@
-* To automatically connect to a server, and run a single command instead of a script, and then exit, use the '''--run-command''' parameter instead of the '''--run-script''' parameter. The''' --batch-mode''' parameter can be left out to remain in the current session (in interactive mode) after the command is invoked.
+* To automatically connect to a server, and run a single command instead
+of a script, and then exit, use the '''--run-command''' parameter
+instead of the '''--run-script''' parameter. The''' --batch-mode'''
+parameter can be left out to remain in the current session (in
+interactive mode) after the command is invoked.
          '''yangcli --server=myserver.example.com \'''
@@ Line 240: / Line 340: @@
 To terminate the '''yangcli''' program, use the '''quit''' command.
-The control-C character sequence will also cause the program to be terminated.
+The control-C character sequence will also cause the program to be
+terminated.
 === Statements ===
-The '''yangcli''' script interpreter accepts several types of statements:
+The '''yangcli''' script interpreter accepts several types of
+statements:
@@ Line 250: / Line 352: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| <center>'''type'''</center>
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| <center>'''description'''</center>
-| style="border:0.5pt solid #000000;padding:0.0382in;"| <center>'''example'''</center>
+#000000;border-right:none;padding:0.0382in;"|
+<center>'''type'''</center>
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"|
+<center>'''description'''</center>
+|
+<center>'''example'''</center>
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| command
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| <nowiki>invoke a local command and/or send an <rpc> to the server</nowiki>
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| sget /system
+#000000;border-right:none;padding:0.0382in;"| command
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| <nowiki>invoke a local
+command and/or send an <rpc> to the server</nowiki>
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| sget /system
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| variable assignment
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| set a user variable to some value
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| $system = sget /system
+#000000;border-right:none;padding:0.0382in;"| variable assignment
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| set a user variable to
+some value
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| $system = sget /system
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| file assignment
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| set the contents of a file to some value
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| @save.txt = $system
+#000000;border-right:none;padding:0.0382in;"| file assignment
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| set the contents of a file
+to some value
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| @save.txt = $system
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| variable deletion
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| delete a user variable or clear a system variable
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| $system =
+#000000;border-right:none;padding:0.0382in;"| variable deletion
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| delete a user variable or
+clear a system variable
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| $system =
 |}
 A command can be as simple like 'get' or complex, like 'edit-config'.
-A variable assignment sets the specified user or system variable to the right hand side of the expression. An expression has many forms, including the result from a local command or a remote NETCONF operation.
+A variable assignment sets the specified user or system variable to the
+right hand side of the expression. An expression has many forms,
+including the result from a local command or a remote NETCONF operation.
-If a string that matches a command is used as the assignment value, then it must be entered in quotes (single or double). For example, the''' $$default-operation''' system configuration variable accepts enumeration values which also match RPC commands:
+If a string that matches a command is used as the assignment value, then
+it must be entered in quotes (single or double). For example, the'''
+$$default-operation''' system configuration variable accepts enumeration
+values which also match RPC commands:
@@ Line 286: / Line 428: @@
-A file assignment is essentially the same as a variable assignment, except the right hand side of the expression is saved in the specified file, instead of a user variable.
+A file assignment is essentially the same as a variable assignment,
+except the right hand side of the expression is saved in the specified
+file, instead of a user variable.
-To delete a user variable, leave the right hand side of the expression empty (or just whitespace).
+To delete a user variable, leave the right hand side of the expression
+empty (or just whitespace).
 Note: More statement types will be available in the next release.
 === Commands ===
-The yangcli program has several built-in commands, defined in '''yangcli.yang''', '''yuma'''-'''netconf.yang,''' and '''notifications.yang'''.
+The yangcli program has several built-in commands, defined in
+'''yangcli.yang''', '''yuma'''-'''netconf.yang,''' and
+'''notifications.yang'''.
-The YANG '''rpc''' statement is used to define the syntax and behavior of each command.
+The YANG '''rpc''' statement is used to define the syntax and behavior
+of each command.
 There are 2 types of yangcli commands:
-* '''local''': the command is executed within the yangcli application, and can be invoked at any time.
+* '''local''': the command is executed within the yangcli application,
+and can be invoked at any time.
-* '''remote''': the command is executed on the remote server, and is only available when a NETCONF session is active. Any YANG '''rpc''' statement that '''yangcli''' does not recognize as a local command is treated as a remote command available on the server.
+* '''remote''': the command is executed on the remote server, and is
+only available when a NETCONF session is active. Any YANG '''rpc'''
+statement that '''yangcli''' does not recognize as a local command is
+treated as a remote command available on the server.
 <center>'''Local Commands'''</center>
@@ Line 306: / Line 458: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| <center>'''command'''</center>
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| <center>'''description'''</center>
+#000000;border-right:none;padding:0.0382in;"|
+<center>'''command'''</center>
+|
+<center>'''description'''</center>
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| alias
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Show or set a specific yangcli command alias
+#000000;border-right:none;padding:0.0382in;"| alias
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Show or set a specific yangcli command alias
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| aliases
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Manage the yangcli command aliases
+#000000;border-right:none;padding:0.0382in;"| aliases
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Manage the yangcli command aliases
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| cd
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Change the current working directory
+#000000;border-right:none;padding:0.0382in;"| cd
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Change the current working directory
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| connect
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Connect to a server and start a NETCONF session
+#000000;border-right:none;padding:0.0382in;"| connect
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Connect to a server and start a NETCONF
+session
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| elif
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Start an 'else-if' conditional block
+#000000;border-right:none;padding:0.0382in;"| elif
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Start an 'else-if' conditional block
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| else
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Start an 'else' conditional block
+#000000;border-right:none;padding:0.0382in;"| else
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Start an 'else' conditional block
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| end
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| End an 'if' or 'while' block
+#000000;border-right:none;padding:0.0382in;"| end
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| End an 'if' or 'while' block
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| eval
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Evaluate an XPath expression
+#000000;border-right:none;padding:0.0382in;"| eval
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Evaluate an XPath expression
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| eventlog
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| View or clear the notification event log
+#000000;border-right:none;padding:0.0382in;"| eventlog
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| View or clear the notification event log
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| fill
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Fill a user variable
+#000000;border-right:none;padding:0.0382in;"| fill
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Fill a user variable
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| help
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Get context-sensitive help
+#000000;border-right:none;padding:0.0382in;"| help
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Get context-sensitive help
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| history
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Manage the command history buffer
+#000000;border-right:none;padding:0.0382in;"| history
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Manage the command history buffer
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| if
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Start an 'if' conditional block
+#000000;border-right:none;padding:0.0382in;"| if
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Start an 'if' conditional block
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| list
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| List modules, objects, or other properties of the session
+#000000;border-right:none;padding:0.0382in;"| list
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| List modules, objects, or other properties
+of the session
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| log-debug
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Log a debug message
+#000000;border-right:none;padding:0.0382in;"| log-debug
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Log a debug message
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| log-error
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Log an error message
+#000000;border-right:none;padding:0.0382in;"| log-error
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Log an error message
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| log-info
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Log an info message
+#000000;border-right:none;padding:0.0382in;"| log-info
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Log an info message
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| log-warn
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Log a warning message
+#000000;border-right:none;padding:0.0382in;"| log-warn
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Log a warning message
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| mgrload
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Load a YANG file into the client only
+#000000;border-right:none;padding:0.0382in;"| mgrload
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Load a YANG file into the client only
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| pwd
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Print the current working directoty
+#000000;border-right:none;padding:0.0382in;"| pwd
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Print the current working directoty
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| quit
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Exit the program
+#000000;border-right:none;padding:0.0382in;"| quit
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Exit the program
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| recall
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Recall a line from the command history buffer
+#000000;border-right:none;padding:0.0382in;"| recall
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Recall a line from the command history
+buffer
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| run
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Run a script
+#000000;border-right:none;padding:0.0382in;"| run
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Run a script
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| show
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Show variables and objects currently available
+#000000;border-right:none;padding:0.0382in;"| show
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Show variables and objects currently
+available
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| start-timer
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Start a script timer
+#000000;border-right:none;padding:0.0382in;"| start-timer
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Start a script timer
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| stop-timer
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Stop a script timer and display the elapsed time
+#000000;border-right:none;padding:0.0382in;"| stop-timer
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Stop a script timer and display the elapsed
+time
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| unset
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Remove a command alias from memory
+#000000;border-right:none;padding:0.0382in;"| unset
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Remove a command alias from memory
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| uservars
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Manage the yangcli user variables
+#000000;border-right:none;padding:0.0382in;"| uservars
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Manage the yangcli user variables
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| while
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Start a 'while' conditional loop block
+#000000;border-right:none;padding:0.0382in;"| while
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Start a 'while' conditional loop block
 |}
-The following table shows the standard NETCONF protocol operations that are directly available for use, depending on the capabilities of the server.
+The following table shows the standard NETCONF protocol operations that
+are directly available for use, depending on the capabilities of the
+server.
@@ Line 434: / Line 713: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| <center>'''command'''</center>
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| <center>'''description'''</center>
+#000000;border-right:none;padding:0.0382in;"|
+<center>'''command'''</center>
+|
+<center>'''description'''</center>
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| cancel-commit
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Cancel the current confirmed commit procedure
+#000000;border-right:none;padding:0.0382in;"| cancel-commit
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Cancel the current confirmed commit
+procedure
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| close-session
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Close the current NETCONF session
+#000000;border-right:none;padding:0.0382in;"| close-session
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Close the current NETCONF session
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| commit
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Make the candidate database be the running config
+#000000;border-right:none;padding:0.0382in;"| commit
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Make the candidate database be the running
+config
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| copy-config
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Copy an entire NETCONF database
+#000000;border-right:none;padding:0.0382in;"| copy-config
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Copy an entire NETCONF database
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| create-subscription
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Start receiving NETCONF notifications
+#000000;border-right:none;padding:0.0382in;"| create-subscription
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Start receiving NETCONF notifications
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| delete-config
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Delete an entire NETCONF database
+#000000;border-right:none;padding:0.0382in;"| delete-config
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Delete an entire NETCONF database
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| discard-changes
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Discard any edits in the candidate database
+#000000;border-right:none;padding:0.0382in;"| discard-changes
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Discard any edits in the candidate database
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| edit-config
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Alteration of the target database
+#000000;border-right:none;padding:0.0382in;"| edit-config
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Alteration of the target database
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| get
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Filtered retrieval of state data and running config
+#000000;border-right:none;padding:0.0382in;"| get
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Filtered retrieval of state data and running
+config
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| get-config
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Filtered retrieval of any NETCONF database
+#000000;border-right:none;padding:0.0382in;"| get-config
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Filtered retrieval of any NETCONF database
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| get-schema
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Get a data model definition file from the server
+#000000;border-right:none;padding:0.0382in;"| get-schema
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Get a data model definition file from the
+server
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| kill-session
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Force close another NETCONF session
+#000000;border-right:none;padding:0.0382in;"| kill-session
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Force close another NETCONF session
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| lock
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Lock a NETCONF database that is currently unlocked
+#000000;border-right:none;padding:0.0382in;"| lock
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Lock a NETCONF database that is currently
+unlocked
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| unlock
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Unlock a NETCONF database that is currently locked
+#000000;border-right:none;padding:0.0382in;"| unlock
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Unlock a NETCONF database that is currently
+locked
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| validate
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Validate the contents of a NETCONF database
+#000000;border-right:none;padding:0.0382in;"| validate
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Validate the contents of a NETCONF database
 |}
-The following '''yangcli''' commands are available for simplified access to standard NETCONF operations
+The following '''yangcli''' commands are available for simplified access
+to standard NETCONF operations
@@ Line 506: / Line 856: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| <center>'''command'''</center>
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| <center>'''description'''</center>
+#000000;border-right:none;padding:0.0382in;"|
+<center>'''command'''</center>
+|
+<center>'''description'''</center>
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| create
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| <nowiki>Invoke an <edit-config> create operation</nowiki>
+#000000;border-right:none;padding:0.0382in;"| create
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| <nowiki>Invoke an <edit-config> create
+operation</nowiki>
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| delete
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| <nowiki>Invoke an <edit-config> delete operation</nowiki>
+#000000;border-right:none;padding:0.0382in;"| delete
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| <nowiki>Invoke an <edit-config> delete
+operation</nowiki>
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| get-locks
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| <nowiki>Lock all the databases with the <lock> operation</nowiki>
+#000000;border-right:none;padding:0.0382in;"| get-locks
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| <nowiki>Lock all the databases with the
+<lock> operation</nowiki>
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| insert
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| <nowiki>Invoke an <edit-config> YANG insert operation</nowiki>
+#000000;border-right:none;padding:0.0382in;"| insert
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| <nowiki>Invoke an <edit-config> YANG insert
+operation</nowiki>
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| merge
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| <nowiki>Invoke an <edit-config> merge operation</nowiki>
+#000000;border-right:none;padding:0.0382in;"| merge
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| <nowiki>Invoke an <edit-config> merge
+operation</nowiki>
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| release-locks
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| <nowiki>Unlock all the locked databases with the <unlock> operation</nowiki>
+#000000;border-right:none;padding:0.0382in;"| release-locks
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| <nowiki>Unlock all the locked databases with
+the <unlock> operation</nowiki>
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| remove
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| <nowiki>Invoke an <edit-config> remove operation</nowiki>
+#000000;border-right:none;padding:0.0382in;"| remove
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| <nowiki>Invoke an <edit-config> remove
+operation</nowiki>
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| replace
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| <nowiki>Invoke an <edit-config> replace operation</nowiki>
+#000000;border-right:none;padding:0.0382in;"| replace
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| <nowiki>Invoke an <edit-config> replace
+operation</nowiki>
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| save
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Save the current edits on the server in NV-storage
+#000000;border-right:none;padding:0.0382in;"| save
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Save the current edits on the server in
+NV-storage
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| sget
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| <nowiki>Invoke a <get> operation with a subtree filter</nowiki>
+#000000;border-right:none;padding:0.0382in;"| sget
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| <nowiki>Invoke a <get> operation with a
+subtree filter</nowiki>
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| sget-config
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| <nowiki>Invoke a <get-config> operation with a subtree filter</nowiki>
+#000000;border-right:none;padding:0.0382in;"| sget-config
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| <nowiki>Invoke a <get-config> operation with
+a subtree filter</nowiki>
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| xget
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| <nowiki>Invoke a <get> operation with an XPath filter</nowiki>
+#000000;border-right:none;padding:0.0382in;"| xget
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| <nowiki>Invoke a <get> operation with an
+XPath filter</nowiki>
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| xget-config
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| <nowiki>Invoke a <get-config> operation with an XPath filter</nowiki>
+#000000;border-right:none;padding:0.0382in;"| xget-config
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| <nowiki>Invoke a <get-config> operation with
+an XPath filter</nowiki>
 |}
-The following table shows the extended NETCONF protocol operations that are available on the '''netconfd''' server only.
+The following table shows the extended NETCONF protocol operations that
+are available on the '''netconfd''' server only.
@@ Line 570: / Line 990: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| <center>'''command'''</center>
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| <center>'''description'''</center>
+#000000;border-right:none;padding:0.0382in;"|
+<center>'''command'''</center>
+|
+<center>'''description'''</center>
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| get-my-session
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Retrieve session customization parameters
+#000000;border-right:none;padding:0.0382in;"| get-my-session
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Retrieve session customization parameters
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| load
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Load a module into the server.
+#000000;border-right:none;padding:0.0382in;"| load
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Load a module into the server.
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| no-op
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| No operation.
+#000000;border-right:none;padding:0.0382in;"| no-op
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| No operation.
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| restart
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Restart the server.
+#000000;border-right:none;padding:0.0382in;"| restart
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Restart the server.
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| set-log-level
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Set the server logging verbosity level.
+#000000;border-right:none;padding:0.0382in;"| set-log-level
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Set the server logging verbosity level.
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| set-my-session
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Set session customization parameters.
+#000000;border-right:none;padding:0.0382in;"| set-my-session
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Set session customization parameters.
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| shutdown
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Shutdown the server.
+#000000;border-right:none;padding:0.0382in;"| shutdown
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Shutdown the server.
 |}
 === Variables ===
-The '''yangcli''' program utilizes several types of user-accessible variables. These variables can be listed with the ''''show vars'''' command and other commands as well.
+The '''yangcli''' program utilizes several types of user-accessible
+variables. These variables can be listed with the ''''show vars''''
+command and other commands as well.
-A variable reference consists of 1 or 2 dollar signs ('$'), followed immediately by a valid identifier string (e.g., '''$$global-log''' or '''$local-log''').
+A variable reference consists of 1 or 2 dollar signs ('$'), followed
+immediately by a valid identifier string (e.g., '''$$global-log''' or
+'''$local-log''').
-Variables can be 1 or more characters in length, and follow the YANG rules for identifier names. The first character must be a letter, 'A' to 'Z', or 'a' to 'z'. The 2<sup>nd</sup> to last characters can be a letter 'A' to 'Z', or 'a' to 'z', number ('0' to '9'), an underscore ('_'), a dash ('-'), or a period ('.') character.
+Variables can be 1 or more characters in length, and follow the YANG
+rules for identifier names. The first character must be a letter, 'A' to
+'Z', or 'a' to 'z'. The 2<sup>nd</sup> to last characters can be a
+letter 'A' to 'Z', or 'a' to 'z', number ('0' to '9'), an underscore
+('_'), a dash ('-'), or a period ('.') character.
@@ Line 618: / Line 1,078: @@
 # Read-write local user variables
-It is an error if a variable is referenced (in the right-hand-side of a statement) that does not exist.
+It is an error if a variable is referenced (in the right-hand-side of a
+statement) that does not exist.
-The first 3 types are '''global variables''', which means that they are available to all run-levels of all scripts. The last type, called a '''local variable,''' is only visible to the current run-level of the current script (or interactive shell). Refer to the following section for more details on run levels.
+The first 3 types are '''global variables''', which means that they are
+available to all run-levels of all scripts. The last type, called a
+'''local variable,''' is only visible to the current run-level of the
+current script (or interactive shell). Refer to the following section
+for more details on run levels.
@@ Line 628: / Line 1,093: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| <center>'''syntax'''</center>
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| <center>'''description'''</center>
-| style="border:0.5pt solid #000000;padding:0.0382in;"| <center>'''example'''</center>
+#000000;border-right:none;padding:0.0382in;"|
+<center>'''syntax'''</center>
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"|
+<center>'''description'''</center>
+|
+<center>'''example'''</center>
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| <nowiki>$$<variable-name></nowiki>
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Left hand side: set the global variable to some value
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| $$saved_get = get
+#000000;border-right:none;padding:0.0382in;"|
+<nowiki>$$<variable-name></nowiki>
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Left hand side: set the
+global variable to some value
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| $$saved_get = get
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| <nowiki>$$<variable-name></nowiki>
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Right hand side: access the value of a global variable
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| fill --target=\ $$mytarget
+#000000;border-right:none;padding:0.0382in;"|
+<nowiki>$$<variable-name></nowiki>
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Right hand side: access
+the value of a global variable
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| fill --target=\ $$mytarget
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| <nowiki>$<variable-name></nowiki>
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Left hand side: set the local variable to some value
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| $myloglevel = \ $$log-level
+#000000;border-right:none;padding:0.0382in;"|
+<nowiki>$<variable-name></nowiki>
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Left hand side: set the
+local variable to some value
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| $myloglevel = \ $$log-level
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| <nowiki>$<variable-name></nowiki>
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Right hand side: access the value of any variable with this name (try local, then global)
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| $myuser = $user
+#000000;border-right:none;padding:0.0382in;"|
+<nowiki>$<variable-name></nowiki>
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Right hand side: access
+the value of any variable with this name (try local, then global)
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| $myuser = $user
 |}
-The following table shows the '''unix''' environment variables that are available as read-only global variables in '''yangcli'''. These variables are set once when the program is started, and cannot be used in the the left hand side of an assignment statement.
+The following table shows the '''unix''' environment variables that are
+available as read-only global variables in '''yangcli'''. These
+variables are set once when the program is started, and cannot be used
+in the the left hand side of an assignment statement.
@@ Line 661: / Line 1,168: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| <center>'''variable'''</center>
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| <center>'''description'''</center>
+#000000;border-right:none;padding:0.0382in;"|
+<center>'''variable'''</center>
+|
+<center>'''description'''</center>
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| $$HOME
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| the '''HOME''' environment variable
+#000000;border-right:none;padding:0.0382in;"| $$HOME
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| the '''HOME''' environment variable
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| $$HOSTNAME
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| the '''HOST''' or '''HOSTNAME''' environment variable
+#000000;border-right:none;padding:0.0382in;"| $$HOSTNAME
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| the '''HOST''' or '''HOSTNAME''' environment
+variable
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| $$LANG
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| the '''LANG''' environment variable
+#000000;border-right:none;padding:0.0382in;"| $$LANG
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| the '''LANG''' environment variable
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| $$PWD
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| the '''PWD''' environment variable, when '''yangcli''' was invoked
+#000000;border-right:none;padding:0.0382in;"| $$PWD
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| the '''PWD''' environment variable, when
+'''yangcli''' was invoked
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| $$SHELL
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| the '''SHELL''' environment variable
+#000000;border-right:none;padding:0.0382in;"| $$SHELL
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| the '''SHELL''' environment variable
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| $$USER
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| the '''USER''' environment variable
+#000000;border-right:none;padding:0.0382in;"| $$USER
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| the '''USER''' environment variable
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| $$YUMA_DATAPATH
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| the '''YUMA_DATAPATH''' environment variable
+#000000;border-right:none;padding:0.0382in;"| $$YUMA_DATAPATH
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| the '''YUMA_DATAPATH''' environment variable
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| $$YUMA_HOME
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| the '''YUMA_HOME''' environment variable
+#000000;border-right:none;padding:0.0382in;"| $$YUMA_HOME
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| the '''YUMA_HOME''' environment variable
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| $$YUMA_MODPATH
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| the '''YUMA_MODPATH''' environment variable
+#000000;border-right:none;padding:0.0382in;"| $$YUMA_MODPATH
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| the '''YUMA_MODPATH''' environment variable
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| $$YUMA_RUNPATH
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| the '''YUMA_RUNPATH''' environment variable
+#000000;border-right:none;padding:0.0382in;"| $$YUMA_RUNPATH
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| the '''YUMA_RUNPATH''' environment variable
 |}
-The following table shows the CLI configuration parameters that can be read or changed (but not deleted). If a particular parameter was not set during program invocation, then the associated variable will contain the empty string.
+The following table shows the CLI configuration parameters that can be
+read or changed (but not deleted). If a particular parameter was not set
+during program invocation, then the associated variable will contain the
+empty string.
@@ Line 713: / Line 1,269: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| <center>'''variable'''</center>
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| <center>'''description'''</center>
+#000000;border-right:none;padding:0.0382in;"|
+<center>'''variable'''</center>
+|
+<center>'''description'''</center>
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| $$alt-names
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| the '''–alt-names''' configuration parameter
+#000000;border-right:none;padding:0.0382in;"| $$alt-names
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| the '''–alt-names''' configuration parameter
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| $$autocomp
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| the -'''-autocomp''' configuration parameter
+#000000;border-right:none;padding:0.0382in;"| $$autocomp
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| the -'''-autocomp''' configuration parameter
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| $$autoload
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| the '''--autoload''' configuration parameter
+#000000;border-right:none;padding:0.0382in;"| $$autoload
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| the '''--autoload''' configuration parameter
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| $$baddata
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| the '''--baddata''' configuration parameter
+#000000;border-right:none;padding:0.0382in;"| $$baddata
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| the '''--baddata''' configuration parameter
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| $$default-module
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| the '''--default-module''' configuration parameter
+#000000;border-right:none;padding:0.0382in;"| $$default-module
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| the '''--default-module''' configuration
+parameter
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| $$default-operation
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| <nowiki>the <default-operation> parameter for the <edit-config> operation</nowiki>
+#000000;border-right:none;padding:0.0382in;"| $$default-operation
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| <nowiki>the <default-operation> parameter
+for the <edit-config> operation</nowiki>
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| $$display-mode
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| the '''--display-mode''' configuration parameter
+#000000;border-right:none;padding:0.0382in;"| $$display-mode
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| the '''--display-mode''' configuration
+parameter
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| $$error-option
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| <nowiki>the default <error-option> parameter for the <edit-config> operation</nowiki>
+#000000;border-right:none;padding:0.0382in;"| $$error-option
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| <nowiki>the default <error-option> parameter
+for the <edit-config> operation</nowiki>
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| $$fixorder
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| the '''--fixorder''' configuration parameter
+#000000;border-right:none;padding:0.0382in;"| $$fixorder
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| the '''--fixorder''' configuration parameter
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| $$indent
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| the '''–indent''' configuration parameter
+#000000;border-right:none;padding:0.0382in;"| $$indent
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| the '''–indent''' configuration parameter
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| $$log-level
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| the '''--log-level''' configuration parameter
+#000000;border-right:none;padding:0.0382in;"| $$log-level
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| the '''--log-level''' configuration
+parameter
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| $$match-names
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| the '''–match-names''' configuration parameter
+#000000;border-right:none;padding:0.0382in;"| $$match-names
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| the '''–match-names''' configuration
+parameter
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| $$optional
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| the '''--optional''' configuration parameter
+#000000;border-right:none;padding:0.0382in;"| $$optional
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| the '''--optional''' configuration parameter
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| $$server
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| the '''--server''' configuration parameter
+#000000;border-right:none;padding:0.0382in;"| $$server
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| the '''--server''' configuration parameter
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| $$test-option
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| <nowiki>the <test-option> parameter for the <edit-config> operation</nowiki>
+#000000;border-right:none;padding:0.0382in;"| $$test-option
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| <nowiki>the <test-option> parameter for the
+<edit-config> operation</nowiki>
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| $$time-rpcs
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| the '''–time-rpcs''' configuration parameter
+#000000;border-right:none;padding:0.0382in;"| $$time-rpcs
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| the '''–time-rpcs''' configuration parameter
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| $$timeout
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| the '''--timeout''' configuration parameter
+#000000;border-right:none;padding:0.0382in;"| $$timeout
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| the '''--timeout''' configuration parameter
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| $$use-xmlheader
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| the '''–use-xmlheader '''configuration parameter
+#000000;border-right:none;padding:0.0382in;"| $$use-xmlheader
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| the '''–use-xmlheader '''configuration
+parameter
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| $$user
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| the '''--user''' configuration parameter
+#000000;border-right:none;padding:0.0382in;"| $$user
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| the '''--user''' configuration parameter
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| $$with-defaults
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| the '''--with-defaults''' configuration parameter
+#000000;border-right:none;padding:0.0382in;"| $$with-defaults
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| the '''--with-defaults''' configuration
+parameter
 |}
@@ Line 801: / Line 1,450: @@
-If a unrecognized global variable (e.g., $$foo) is used in the left-hand side of an assignment statement, then a global user variable will be created with that name. If the global user variable already exists, then its value will be overwritten.
+If a unrecognized global variable (e.g., $$foo) is used in the left-hand
+side of an assignment statement, then a global user variable will be
+created with that name. If the global user variable already exists, then
+its value will be overwritten.
-The '''uservars''' command can be used to load or store these variables so they are loaded at boot-time. By default, the XML file used to store these variables is '''$HOME/.yuma/yangcli_uservars.xml'''.
+The '''uservars''' command can be used to load or store these variables
+so they are loaded at boot-time. By default, the XML file used to store
+these variables is '''$HOME/.yuma/yangcli_uservars.xml'''.
@@ Line 809: / Line 1,463: @@
+If a local variable (e.g., $foo) is used in the left-hand side of an
-If a local variable (e.g., $foo) is used in the left-hand side of an assignment statement, then a local user variable will be created with that name. If the local user variable already exists, then its value will be overwritten. If the variable is created within a script (i.e., run-level greater than zero), then it will be deleted when the script exits.
+assignment statement, then a local user variable will be created with
+that name. If the local user variable already exists, then its value
+will be overwritten. If the variable is created within a script (i.e.,
+run-level greater than zero), then it will be deleted when the script
+exits.
 === Files ===
-File contents can be used in '''yangcli''' statements, similar to user variables.
+File contents can be used in '''yangcli''' statements, similar to user
+variables.
-A file reference consist of the 'at-sign' character ('@') followed immediately by a valid file specification.
+A file reference consist of the 'at-sign' character ('@') followed
+immediately by a valid file specification.
-     @foo.yang = get-schema --identifier=foo --version=”” --format=”YANG”
+     @foo.yang = get-schema --identifier=foo --version=””
+--format=”YANG”
      mgrload --module=foo
+If the file extension is “'''.yang'''”, “'''.log'''”, “'''.txt'''”, or
-If the file extension is “'''.yang'''”, “'''.log'''”, “'''.txt'''”, or “'''.text'''”, then the value (or command output) will be saved, and yangcli will strip off the outermost XML (if needed) to save the requested file as a pure text file. Otherwise, the file will be saved in XML format. The display mode set by the user can affect XML output. If the display mode i s'xml-nons' then XML without namespace (xmlns) attributes will be generated instead of normal XML.
+“'''.text'''”, then the value (or command output) will be saved, and
+yangcli will strip off the outermost XML (if needed) to save the
+requested file as a pure text file. Otherwise, the file will be saved in
+XML format. The display mode set by the user can affect XML output. If
+the display mode i s'xml-nons' then XML without namespace (xmlns)
+attributes will be generated instead of normal XML.
-Note: The '''--display-mode''' configuration parameter, and '''$$display-mode''' system variable, only affect the output and display of data in the yangcli program. NETCONF protocol messages are always sent in 'xml' mode.
+Note: The '''--display-mode''' configuration parameter, and
+'''$$display-mode''' system variable, only affect the output and display
+of data in the yangcli program. NETCONF protocol messages are always
+sent in 'xml' mode.
 Files may also be used as parameter replacements, within a command.
-     $saved_get = get [mailto:--filter%3D@filter.xml --filter=@filter.xml] --with-defaults=explicit
+     $saved_get = get [mailto:--filter%3D@filter.xml
+--filter=@filter.xml] --with-defaults=explicit
@@ Line 836: / Line 1,508: @@
 === Scripts ===
-Any command can be entered at the interactive shell, or stored in a script file, and invoked with the ''''run'''' command. Scripts are simply text files, and the extension used does not matter.
+Any command can be entered at the interactive shell, or stored in a
+script file, and invoked with the ''''run'''' command. Scripts are
+simply text files, and the extension used does not matter.
-There are no formal templates for scripts, like there are for RPC operations, at this time. Instead, positional parameters can be passed to any script.
+There are no formal templates for scripts, like there are for RPC
+operations, at this time. Instead, positional parameters can be passed
+to any script.
-The parameters named '''--P1''' to '''--P9''' allow up to 9 parameters to be passed to any script. Within each script, the numbered parameters ''''$1'''' to ''''$9'''' are available, and contain the value that was passed as the corresponding ---Pn” parameter when calling the script.
+The parameters named '''--P1''' to '''--P9''' allow up to 9 parameters
+to be passed to any script. Within each script, the numbered parameters
+''''$1'''' to ''''$9'''' are available, and contain the value that was
+passed as the corresponding ---Pn” parameter when calling the script.
-If a line contains only optional whitespace, followed by the pound sign character '#', then the line is treated as a comment. These lines will be skipped.
+If a line contains only optional whitespace, followed by the pound sign
+character '#', then the line is treated as a comment. These lines will
+be skipped.
-<nowiki>If an error occurs during a command within a script, or an <rpc-error> is received from the server during a NETCONF session, then the running script will be canceled, and if this was a nested script, then all parent scripts will also be canceled.</nowiki>
+<nowiki>If an error occurs during a command within a script, or an
+<rpc-error> is received from the server during a NETCONF session, then
+the running script will be canceled, and if this was a nested script,
+then all parent scripts will also be canceled.</nowiki>
@@ Line 866: / Line 1,550: @@
 The '''run''' command can appear in a script.
+When '''yangcli''' starts up, either in interactive mode or in batch
-When '''yangcli''' starts up, either in interactive mode or in batch mode, the script interpreter is at run level zero. Each time a '''run''' command is invoked, either at the command line or within a script currently being invoked, a new run level with the next higher value is assigned. Local variables are only visible within the current run level.
+mode, the script interpreter is at run level zero. Each time a '''run'''
+command is invoked, either at the command line or within a script
+currently being invoked, a new run level with the next higher value is
+assigned. Local variables are only visible within the current run level.
 A maximum of 512 run levels are supported in '''yangcli'''.
-Scripts can be called recursively, but a stop condition needs to be used to break the recursion (e.g., call the script from within a conditional code block.
+Scripts can be called recursively, but a stop condition needs to be used
+to break the recursion (e.g., call the script from within a conditional
+code block.
@@ Line 876: / Line 1,566: @@
-The 'if', 'elif', 'else', and 'end' commands are used to create an 'if command sequence'.
+The 'if', 'elif', 'else', and 'end' commands are used to create an 'if
+command sequence'.
-Any other commands that appear between these commands are part of a conditional command block.
+Any other commands that appear between these commands are part of a
+conditional command block.
-These blocks can be nested. The current conditional state is inherited, so an if command sequence within a false conditional block will not be executed. A block can contain zero or more command lines,
+These blocks can be nested. The current conditional state is inherited,
+so an if command sequence within a false conditional block will not be
+executed. A block can contain zero or more command lines,
-These command work exactly like an 'if' expression within a program language such as Python. Note that indentation is not significant, but it may be used to make scripts more readable.
+These command work exactly like an 'if' expression within a program
+language such as Python. Note that indentation is not significant, but
+it may be used to make scripts more readable.
-The 'if' command starts a new if-command sequence. It is followed by a conditional command block. This block ends when an 'elif', 'else', or 'end' command within the same if command block is encountered.
+The 'if' command starts a new if-command sequence. It is followed by a
+conditional command block. This block ends when an 'elif', 'else', or
+'end' command within the same if command block is encountered.
-At most, only one conditional code block within the if command sequence will be executed. Once a conditional command block has been exectuted, any remaining blocks will be skipped.
+At most, only one conditional code block within the if command sequence
+will be executed. Once a conditional command block has been exectuted,
+any remaining blocks will be skipped.
-All user and system variables that are available to the current script run level can be used within the XPath expressions for determining the conditional block state (true or false).
+All user and system variables that are available to the current script
+run level can be used within the XPath expressions for determining the
+conditional block state (true or false).
@@ Line 894: / Line 1,596: @@
-The 'while' and 'end' commands are used to create an 'while loop sequence'.
+The 'while' and 'end' commands are used to create an 'while loop
+sequence'.
-Any other commands that appear between these commands are part of a conditional command loop block.
+Any other commands that appear between these commands are part of a
+conditional command loop block.
-These blocks can be nested. The current conditional state is inherited, so a while loop sequence within a false conditional block will not be executed. A block can contain zero or more command lines,
+These blocks can be nested. The current conditional state is inherited,
+so a while loop sequence within a false conditional block will not be
+executed. A block can contain zero or more command lines,
-The loop condition can be a constant expression. The maxloops parameter will prevent infinite looping, and can be utilized to use the while loop sequence as a simple 'for' loop, iterating a specific number of times.
+The loop condition can be a constant expression. The maxloops parameter
+will prevent infinite looping, and can be utilized to use the while loop
+sequence as a simple 'for' loop, iterating a specific number of times.
-All user and system variables that are available to the current script run level can be used within the XPath expressions for determining the conditional block state (continue or terminate loop).
+All user and system variables that are available to the current script
+run level can be used within the XPath expressions for determining the
+conditional block state (continue or terminate loop).
@@ Line 943: / Line 1,653: @@
 === Configuration Parameter List ===
-The following configuration parameters are used by '''yangcli'''. Refer to the CLI Reference for more details.
+The following configuration parameters are used by '''yangcli'''. Refer
+to the CLI Reference for more details.
@@ Line 950: / Line 1,661: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| <center>'''parameter'''</center>
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| <center>'''description'''</center>
+#000000;border-right:none;padding:0.0382in;"|
+<center>'''parameter'''</center>
+|
+<center>'''description'''</center>
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| --aliases-file
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Specifies the command aliases file to use.
+#000000;border-right:none;padding:0.0382in;"| --aliases-file
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Specifies the command aliases file to use.
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| --alt-names
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Controls whether alternate names will be checked for UrlPath searches.
+#000000;border-right:none;padding:0.0382in;"| --alt-names
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Controls whether alternate names will be
+checked for UrlPath searches.
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| --autoaliases
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Controls automatic loading and saving of the command aliases
+#000000;border-right:none;padding:0.0382in;"| --autoaliases
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Controls automatic loading and saving of the
+command aliases
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| --autocomp
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Controls whether partial commands are allowed or not.
+#000000;border-right:none;padding:0.0382in;"| --autocomp
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Controls whether partial commands are
+allowed or not.
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| --autohistory
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Controls whether th command line history buffer will be automatically loaded at startup and saved on exit.
+#000000;border-right:none;padding:0.0382in;"| --autohistory
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Controls whether th command line history
+buffer will be automatically loaded at startup and saved on exit.
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| --autoload
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Controls whether modules used by the server will be loaded automatically, as needed.
+#000000;border-right:none;padding:0.0382in;"| --autoload
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Controls whether modules used by the server
+will be loaded automatically, as needed.
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| --autouservars
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Controls automatic loading and saving of the global user variables
+#000000;border-right:none;padding:0.0382in;"| --autouservars
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Controls automatic loading and saving of the
+global user variables
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| --bad-data
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Controls how bad data about to be sent to the server is handled.
+#000000;border-right:none;padding:0.0382in;"| --bad-data
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Controls how bad data about to be sent to
+the server is handled.
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| --batch-mode
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Indicates the interactive shell should not be used.
+#000000;border-right:none;padding:0.0382in;"| --batch-mode
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Indicates the interactive shell should not
+be used.
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| --config
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Specifies the configuration file to use for parameters.
+#000000;border-right:none;padding:0.0382in;"| --config
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Specifies the configuration file to use for
+parameters.
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| --datapath
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Sets the data file search path.
+#000000;border-right:none;padding:0.0382in;"| --datapath
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Sets the data file search path.
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| --default-module
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Specifies the default module to use to resolve identifiers.
+#000000;border-right:none;padding:0.0382in;"| --default-module
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Specifies the default module to use to
+resolve identifiers.
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| --deviation
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Species one or more YANG modules to load as deviations.`
+#000000;border-right:none;padding:0.0382in;"| --deviation
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Species one or more YANG modules to load as
+deviations.`
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| --display-mode
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Specifies how values should be displayed.
+#000000;border-right:none;padding:0.0382in;"| --display-mode
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Specifies how values should be displayed.
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| --echo-replies
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Controls whether RPC replies will be displayed in the log output, if log-level >= 'info'
+#000000;border-right:none;padding:0.0382in;"| --echo-replies
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Controls whether RPC replies will be
+displayed in the log output, if log-level >= 'info'
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| --feature-disable
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Leaf list of features to disable
+#000000;border-right:none;padding:0.0382in;"| --feature-disable
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Leaf list of features to disable
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| --feature-enable
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Specifies a feature that should be enabled
+#000000;border-right:none;padding:0.0382in;"| --feature-enable
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Specifies a feature that should be enabled
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| --feature-enable-default
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Specifies if a feature should be enabled or disabled by default
+#000000;border-right:none;padding:0.0382in;"| --feature-enable-default
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Specifies if a feature should be enabled or
+disabled by default
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| --fixorder
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Controls whether PDUs are changed to canonical order before sending them to the server.
+#000000;border-right:none;padding:0.0382in;"| --fixorder
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Controls whether PDUs are changed to
+canonical order before sending them to the server.
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| --force-target
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Controls whether the candidate or running configuration datastore will be used as the default edit target, when both are supported by the server.
+#000000;border-right:none;padding:0.0382in;"| --force-target
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Controls whether the candidate or running
+configuration datastore will be used as the default edit target, when
+both are supported by the server.
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| --help
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Get program help.
+#000000;border-right:none;padding:0.0382in;"| --help
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Get program help.
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| --help-mode
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Adjust the help output (--brief or --full).
+#000000;border-right:none;padding:0.0382in;"| --help-mode
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Adjust the help output (--brief or --full).
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| --home
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Override the $HOME environment variable.
+#000000;border-right:none;padding:0.0382in;"| --home
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Override the $HOME environment variable.
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| --indent
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Specifies the indent count to use when writing data.
+#000000;border-right:none;padding:0.0382in;"| --indent
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Specifies the indent count to use when
+writing data.
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| --log
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Specifies the log file to use instead of STDOUT.
+#000000;border-right:none;padding:0.0382in;"| --log
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Specifies the log file to use instead of
+STDOUT.
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| --log-append
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Controls whether a log file will be reused or overwritten.
+#000000;border-right:none;padding:0.0382in;"| --log-append
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Controls whether a log file will be reused
+or overwritten.
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| --log-level
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Controls the verbosity of logging messages.
+#000000;border-right:none;padding:0.0382in;"| --log-level
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Controls the verbosity of logging messages.
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| --match-names
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Match mode to use for UrlPath searches
+#000000;border-right:none;padding:0.0382in;"| --match-names
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Match mode to use for UrlPath searches
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| --modpath
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Sets the module search path.
+#000000;border-right:none;padding:0.0382in;"| --modpath
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Sets the module search path.
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| --module
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Specifies one or more YANG modules to load upon startup.
+#000000;border-right:none;padding:0.0382in;"| --module
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Specifies one or more YANG modules to load
+upon startup.
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| --ncport
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Specifies the NETCONF server port number to use in the '''connect''' command.
+#000000;border-right:none;padding:0.0382in;"| --ncport
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Specifies the NETCONF server port number to
+use in the '''connect''' command.
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| --password
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Specifies the password to use in the '''connect''' command.
+#000000;border-right:none;padding:0.0382in;"| --password
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Specifies the password to use in the
+'''connect''' command.
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| --private-key
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Contains the file path specification for the file containing the client-side private key.
+#000000;border-right:none;padding:0.0382in;"| --private-key
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Contains the file path specification for the
+file containing the client-side private key.
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| --protocols
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Controls which NETCONF protocol versions will be enabled
+#000000;border-right:none;padding:0.0382in;"| --protocols
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Controls which NETCONF protocol versions
+will be enabled
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| --public-key
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Contains the file path specification for the file containing the client-side public key.
+#000000;border-right:none;padding:0.0382in;"| --public-key
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Contains the file path specification for the
+file containing the client-side public key.
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| --runpath
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Sets the executable file search path.
+#000000;border-right:none;padding:0.0382in;"| --runpath
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Sets the executable file search path.
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| --run-command
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Specifies the command to run at startup time.
+#000000;border-right:none;padding:0.0382in;"| --run-command
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Specifies the command to run at startup
+time.
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| --run-script
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Specifies the script to run at startup time.
+#000000;border-right:none;padding:0.0382in;"| --run-script
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Specifies the script to run at startup time.
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| --server
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Specifies the server address to use in the '''connect''' command.
+#000000;border-right:none;padding:0.0382in;"| --server
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Specifies the server address to use in the
+'''connect''' command.
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| --subdirs
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Specifies whether child sub-directories should be searched when looking for files.
+#000000;border-right:none;padding:0.0382in;"| --subdirs
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Specifies whether child sub-directories
+should be searched when looking for files.
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| --time-rpcs
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| <nowiki>Measure the round-trip time of each <rpc> request</nowiki> <nowiki>and <rpc-reply> at the session level.</nowiki>
+#000000;border-right:none;padding:0.0382in;"| --time-rpcs
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| <nowiki>Measure the round-trip time of each
+<rpc> request</nowiki> <nowiki>and <rpc-reply> at the session
+level.</nowiki>
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| --timeout
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Specifies the timeout to use in the '''connect''' command.
+#000000;border-right:none;padding:0.0382in;"| --timeout
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Specifies the timeout to use in the
+'''connect''' command.
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| --transport
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Specified the transport protocol to use (ssh or tcp)
+#000000;border-right:none;padding:0.0382in;"| --transport
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Specified the transport protocol to use (ssh
+or tcp)
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| --use-xmlheader
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Specifies how file result variables will be written for XML files. Controls whether the XML preamble header will be written or not.
+#000000;border-right:none;padding:0.0382in;"| --use-xmlheader
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Specifies how file result variables will be
+written for XML files. Controls whether the XML preamble header will be
+written or not.
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| --user
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| The default user name for NETCONF sessions.
+#000000;border-right:none;padding:0.0382in;"| --user
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| The default user name for NETCONF sessions.
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| --uservars-file
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Specifies the global user variable files to load.
+#000000;border-right:none;padding:0.0382in;"| --uservars-file
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Specifies the global user variable files to
+load.
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| --version
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Prints the program version and exits.
+#000000;border-right:none;padding:0.0382in;"| --version
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Prints the program version and exits.
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| --warn-idlen
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Controls how identifier lengths are checked.
+#000000;border-right:none;padding:0.0382in;"| --warn-idlen
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Controls how identifier lengths are checked.
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| --warn-linelen
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Controls how line lengths are checked.
+#000000;border-right:none;padding:0.0382in;"| --warn-linelen
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Controls how line lengths are checked.
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| --warn-off
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Suppresses the specified warning number.
+#000000;border-right:none;padding:0.0382in;"| --warn-off
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Suppresses the specified warning number.
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| --yuma-home
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Specifies the '''$YUMA_HOME''' project root to use when searching for files.
+#000000;border-right:none;padding:0.0382in;"| --yuma-home
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Specifies the '''$YUMA_HOME''' project root
+to use when searching for files.
 |}
@@ Line 1,172: / Line 2,127: @@
  merge target=/toaster/toastControl<br/>  (will be prompted for value)
-When a command is entered, and the yangcli script interpreter is running in interactive mode ('''--batch-mode''' not active), then the user will be prompted for any missing mandatory parameters.
+When a command is entered, and the yangcli script interpreter is running
+in interactive mode ('''--batch-mode''' not active), then the user will
+be prompted for any missing mandatory parameters.
-If the '''--optional''' parameter is present (or the '''$$optional''' system variable is set to 'true'), then the user will be prompted for any optional parameters that are missing.
+If the '''--optional''' parameter is present (or the '''$$optional'''
+system variable is set to 'true'), then the user will be prompted for
+any optional parameters that are missing.
 A command has the basic form:
-'''<nowiki><name (QName)> </nowiki><nowiki><parameter (any YANG type)>*</nowiki>'''
+'''<nowiki><name (QName)> </nowiki><nowiki><parameter (any YANG
+type)>*</nowiki>'''
-The command name is a qualified name matching the name used in the YANG rpc statement. This is followed by zero or more parameters (in any order).
+The command name is a qualified name matching the name used in the YANG
+rpc statement. This is followed by zero or more parameters (in any
+order).
-A command parameter has the same syntax as a CLI configuration parameter.
+A command parameter has the same syntax as a CLI configuration
+parameter.
 The command name syntax is described below.
-An un-escaped end-of-line character ('enter key') terminates command line input.
+An un-escaped end-of-line character ('enter key') terminates command
+line input.
 === Command Prompt ===
@@ Line 1,195: / Line 2,159: @@
-If the script interpreter is idle and there is no NETCONF session active, then the prompt is simply the program name:
+If the script interpreter is idle and there is no NETCONF session
+active, then the prompt is simply the program name:
@@ Line 1,201: / Line 2,166: @@
-<nowiki>If the script interpreter is idle and there is a NETCONF session active, then the prompt is the program name, followed by ' <user>@<server>', depending on the parameters used in the </nowiki>'''connect''' command:
+<nowiki>If the script interpreter is idle and there is a NETCONF session
+active, then the prompt is the program name, followed by '
+<user>@<server>', depending on the parameters used in the
+</nowiki>'''connect''' command:
@@ Line 1,210: / Line 2,178: @@
-If a backslash, end-of-line sequence ended the previous line, the prompt will simply be the word 'more' indented 3 spaces:
+If a backslash, end-of-line sequence ended the previous line, the prompt
+will simply be the word 'more' indented 3 spaces:
@@ Line 1,217: / Line 2,186: @@
-The 'more>' prompt will continue if the new line also ends in with an escaped end-of-line. When a new line is finally terminated, all the fragments are spliced together and delivered as one command line.
+The 'more>' prompt will continue if the new line also ends in with an
+escaped end-of-line. When a new line is finally terminated, all the
+fragments are spliced together and delivered as one command line.
-Note: context-sensitive command completion is not available in this mode.
+Note: context-sensitive command completion is not available in this
+mode.
@@ Line 1,226: / Line 2,198: @@
+If a partial command has been entered in interactive mode, and the
-If a partial command has been entered in interactive mode, and the script interpreter needs to prompt for a YANG 'choice' parameter, then a list of numbered cases will be presented, and the prompt will be the same as it was before (depending on whether a NETCONF session is active or not), except a colon character (':'), followed by the command name, will be added at the end. As long as parameters for the same command are being entered (i.e., prompted for child nodes within a selected case, the command name will be appended to the prompt.
+script interpreter needs to prompt for a YANG 'choice' parameter, then a
+list of numbered cases will be presented, and the prompt will be the
+same as it was before (depending on whether a NETCONF session is active
+or not), except a colon character (':'), followed by the command name,
+will be added at the end. As long as parameters for the same command are
+being entered (i.e., prompted for child nodes within a selected case,
+the command name will be appended to the prompt.
@@ Line 1,247: / Line 2,226: @@
-<nowiki>If a partial command has been entered in interactive mode, and the script interpreter needs to prompt for a leaf or leaf-list, then the parameter name will appear in angle brackets ('<' and '>').</nowiki>
+<nowiki>If a partial command has been entered in interactive mode, and
+the script interpreter needs to prompt for a leaf or leaf-list, then the
+parameter name will appear in angle brackets ('<' and '>').</nowiki>
  Filling mandatory case /sget/input/from/from-cli:
@@ Line 1,254: / Line 2,235: @@
+If the ''''ncx:password'''' extension is part of the YANG definition for
-If the ''''ncx:password'''' extension is part of the YANG definition for the leaf or leaf-list, then the characters entered at the prompt in this mode will not be echoed, and they will not be saved in the command history buffer. Any default value will not be printed either. Instead, 4 asterisks '****' will be printed, even though the correct value will be used in the command.
+the leaf or leaf-list, then the characters entered at the prompt in this
+mode will not be echoed, and they will not be saved in the command
+history buffer. Any default value will not be printed either. Instead, 4
+asterisks '****' will be printed, even though the correct value will be
+used in the command.
-<nowiki>If a default value is available, it will appear in square brackets ('[' and ']'). In this case, entering 'return' will not be interpreted as an empty string, but rather the default value that was presented.</nowiki>
+<nowiki>If a default value is available, it will appear in square
+brackets ('[' and ']'). In this case, entering 'return' will not be
+interpreted as an empty string, but rather the default value that was
+presented.</nowiki>
  yangcli> connect
@@ Line 1,276: / Line 2,265: @@
-Note: After a NETCONF session is terminated for any reason, the connection parameters will be remembered , and presented as defaults the next time the connect command is entered.
+Note: After a NETCONF session is terminated for any reason, the
+connection parameters will be remembered , and presented as defaults the
+next time the connect command is entered.
@@ Line 1,282: / Line 2,273: @@
+If a conditional command (if, elif, else, or while command) is active,
-If a conditional command (if, elif, else, or while command) is active, but the conditional expression is false, then any commands defined within that conditional block will not be executed. <nowiki>If this occurs in interactive mode instead of a script, the string '[F]' will be added to the command prompt. </nowiki>Note that the 'help' and 'log-info' commands do not get executed in the following example:
+but the conditional expression is false, then any commands defined
+within that conditional block will not be executed. <nowiki>If this
+occurs in interactive mode instead of a script, the string '[F]' will be
+added to the command prompt. </nowiki>Note that the 'help' and
+'log-info' commands do not get executed in the following example:
@@ Line 1,303: / Line 2,299: @@
-If there is a prefix (e.g., 'nc:get'), then it needs to be one of the XML prefixes in use at the time. Use the 'show modules' command to see the modules and prefixes in use. The YANG prefix will usually be the same as the XML prefix, but not always.
+If there is a prefix (e.g., 'nc:get'), then it needs to be one of the
+XML prefixes in use at the time. Use the 'show modules' command to see
+the modules and prefixes in use. The YANG prefix will usually be the
+same as the XML prefix, but not always.
-XML prefixes are required to be unique, so if any 2 YANG modules pick the same prefix, then 1 of them has to be changed for XML encoding purposes.
+XML prefixes are required to be unique, so if any 2 YANG modules pick
+the same prefix, then 1 of them has to be changed for XML encoding
+purposes.
-If the '''--default-module''' configuration parameter (or '''$$default-module''' system variable) is set, it will be used to resolve a command name without any prefix, if it is not a NETCONF or '''yangcli''' command.
+If the '''--default-module''' configuration parameter (or
+'''$$default-module''' system variable) is set, it will be used to
+resolve a command name without any prefix, if it is not a NETCONF or
+'''yangcli''' command.
-An error message will be printed if the command entered cannot be found in any YANG module, or if there are multiple commands that match the same string.
+An error message will be printed if the command entered cannot be found
+in any YANG module, or if there are multiple commands that match the
+same string.
 === ncx:default-parm Extension ===
-Each command may define a default parameter, by placing an ''''ncx:default-parm'''' extension in the rpc input section in the YANG rpc statement. This extension allows less typing in '''yangcli''' to accomplish the same thing.
+Each command may define a default parameter, by placing an
+''''ncx:default-parm'''' extension in the rpc input section in the YANG
+rpc statement. This extension allows less typing in '''yangcli''' to
+accomplish the same thing.
-If the script interpreter encounters a string in the command line that is not a recognized parameter for that command, and there is a default parameter defined, then the string will be used as a value for the default parameter.
+If the script interpreter encounters a string in the command line that
+is not a recognized parameter for that command, and there is a default
+parameter defined, then the string will be used as a value for the
+default parameter.
-For example, the 'show' parameter is the default parameter for the 'history' command, so both of these commands will be interpreted to mean the same thing:
+For example, the 'show' parameter is the default parameter for the
+'history' command, so both of these commands will be interpreted to mean
+the same thing:
@@ Line 1,324: / Line 2,338: @@
-Note: the default parameter does not allow the wrong form of a parameter type to be entered, to accept the default for that parameter. For example, the 'show' parameter above has a default value of '25':
+Note: the default parameter does not allow the wrong form of a parameter
+type to be entered, to accept the default for that parameter. For
+example, the 'show' parameter above has a default value of '25':
@@ Line 1,334: / Line 2,350: @@
-The following table shows the default parameters that are available at this time.
+The following table shows the default parameters that are available at
+this time.
@@ Line 1,341: / Line 2,358: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| <center>'''command'''</center>
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| <center>'''default parameter'''</center>
+#000000;border-right:none;padding:0.0382in;"|
+<center>'''command'''</center>
+|
+<center>'''default parameter'''</center>
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| alias
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| var
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| alias
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| var
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| aliases
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| show
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| aliases
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| show
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| cd
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| dir
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| cd
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| dir
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| connect
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| server
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| connect
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| server
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| create
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| target
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| create
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| target
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| elif
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| expr
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| elif
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| expr
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| else
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| expr
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| else
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| expr
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| if
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| expr
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| if
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| expr
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| eventlog
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| show
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| eventlog
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| show
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| fill
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| target
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| fill
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| target
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| help
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| command
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| help
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| command
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| history
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| show
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| history
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| show
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| insert
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| target
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| insert
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| target
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| load
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| module
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| load
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| module
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| log-debug
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| msg
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| log-debug
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| msg
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| log-error
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| msg
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| log-error
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| msg
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| log-info
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| msg
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| log-info
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| msg
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| log-warn
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| msg
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| log-warn
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| msg
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| merge
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| target
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| merge
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| target
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| mgrload
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| module
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| mgrload
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| module
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| recall
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| index
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| recall
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| index
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| replace
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| target
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| replace
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| target
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| run
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| script
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| run
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| script
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| set-log-level
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| log-level
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| set-log-level
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| log-level
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| sget
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| target
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| sget
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| target
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| sget-config
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| target
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| sget-config
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| target
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| xget
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| select
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| xget
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| select
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| xget-config
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| select
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| xget-config
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| select
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| while
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| expr
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| while
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| expr
 |}
 === Parameter Mode Escape Commands ===
-There are 4 escape sequence commands that can be used while entering parameters.
+There are 4 escape sequence commands that can be used while entering
+parameters.
-They all begin with the question mark character ('?'), and end with the 'Enter' key.
+They all begin with the question mark character ('?'), and end with the
+'Enter' key.
-Control key sequences are not used because that would interfere with command line editing keys.
+Control key sequences are not used because that would interfere with
+command line editing keys.
@@ Line 1,474: / Line 2,614: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| <center>'''escape sequence'''</center>
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| <center>'''description'''</center>
+#000000;border-right:none;padding:0.0382in;"| <center>'''escape
+sequence'''</center>
+|
+<center>'''description'''</center>
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| ?
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Print some help text
+#000000;border-right:none;padding:0.0382in;"| ?
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Print some help text
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| ??
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Get all available help text
+#000000;border-right:none;padding:0.0382in;"| ??
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Get all available help text
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| ?s
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Skip this parameter
+#000000;border-right:none;padding:0.0382in;"| ?s
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Skip this parameter
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| ?c
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| Cancel this command
+#000000;border-right:none;padding:0.0382in;"| ?c
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| Cancel this command
 |}
+Note: If the current parameter is considered hidden ('''ncx:hidden'''
-Note: If the current parameter is considered hidden ('''ncx:hidden''' extension used in the YANG definition), then no help will be available for the parameter, even though it is accessible. This also apples to the '''help''' command. Any command or parameter designated as''' ncx:hidden''' will be treated as an unknown identifier, and no help will be given.
+extension used in the YANG definition), then no help will be available
+for the parameter, even though it is accessible. This also apples to the
+'''help''' command. Any command or parameter designated as'''
+ncx:hidden''' will be treated as an unknown identifier, and no help will
+be given.
-Note: Skipping mandatory nodes with the '?s' command is affected by the '''--bad-data''' configuration parameter and '''$$bad-data''' system variable. An error, warning, or confirmation check may occur. Refer to the CLI Reference for more details.
+Note: Skipping mandatory nodes with the '?s' command is affected by the
+'''--bad-data''' configuration parameter and '''$$bad-data''' system
+variable. An error, warning, or confirmation check may occur. Refer to
+the CLI Reference for more details.
-Note: If there are any YANG defined values (e.g., enumeration, bits, default-stmt) available for the current parameter, then pressing the tab key will list the full or partial completions available.
+Note: If there are any YANG defined values (e.g., enumeration, bits,
+default-stmt) available for the current parameter, then pressing the tab
+key will list the full or partial completions available.
 === Using XPath Expressions ===
-There are some command parameters, such as the '''--target''' parameter for the '''create''' command, that accept XPath absolute path expressions.
+There are some command parameters, such as the '''--target''' parameter
+for the '''create''' command, that accept XPath absolute path
+expressions.
-If prefixes are present, then they must match the set of XML prefixes in use at the time. Use the '''show modules''' command to see the current set of prefixes.
+If prefixes are present, then they must match the set of XML prefixes in
+use at the time. Use the '''show modules''' command to see the current
+set of prefixes.
-If prefixes are not used, then the first available matching XML namespace will be used instead.
+If prefixes are not used, then the first available matching XML
+namespace will be used instead.
-If the starting forward slash character ('/') is missing, then it will be added.
+If the starting forward slash character ('/') is missing, then it will
+be added.
@@ Line 1,517: / Line 2,693: @@
-It is important to remember 2 simple rules to avoid common errors in XPath expressions:
+It is important to remember 2 simple rules to avoid common errors in
+XPath expressions:
+# String constants must be quoted with single quote
-# String constants must be quoted with single quote characters.<nowiki>The expression [name=fred] is not the same as [foo='fred'].</nowiki>The former compares the 'name' node value to the 'fred' node value.The latter compares the 'name' node value to the string 'fred'.
+characters.<nowiki>The expression [name=fred] is not the same as
-# The double quote character ('”') is not allowed in XPath '''--select''' parameter expressions because the expression will be sent to the server inside a double-quoted string.
+[foo='fred'].</nowiki>The former compares the 'name' node value to the
+'fred' node value.The latter compares the 'name' node value to the
+string 'fred'.
+# The double quote character ('”') is not allowed in XPath
+'''--select''' parameter expressions because the expression will be sent
+to the server inside a double-quoted string.
-If an incomplete XPath absolute path expression is entered, and the script interpreter is in interactive mode, then the user will be prompted to fill in any missing mandatory nodes or key leafs.
+If an incomplete XPath absolute path expression is entered, and the
+script interpreter is in interactive mode, then the user will be
+prompted to fill in any missing mandatory nodes or key leafs.
      <nowiki># complete form of ifMtu leaf</nowiki>
-     <nowiki>yangcli:fill> /interfaces/interface[name='eth0']/ifMtu</nowiki>
+     <nowiki>yangcli:fill>
+/interfaces/interface[name='eth0']/ifMtu</nowiki>
      <nowiki># incomplete form of ifMtu leaf</nowiki>
@@ Line 1,535: / Line 2,721: @@
-The '''--select''' parameter for the '''xget''' and '''xget-config''' commands accepts full XPath expressions. The expression must yield a node-set result in order to be used as a filter in NETCONF '''get''' and '''get-config''' operations.
+The '''--select''' parameter for the '''xget''' and '''xget-config'''
+commands accepts full XPath expressions. The expression must yield a
+node-set result in order to be used as a filter in NETCONF '''get''' and
+'''get-config''' operations.
-One of the simplest XPath filters to use is the '''descendant-or-self'''<nowiki> filter ('//<expr>').</nowiki>
+One of the simplest XPath filters to use is the
+'''descendant-or-self'''<nowiki> filter ('//<expr>').</nowiki>
-For example, this command will retrieve all instances of the 'ifMtu' leaf:
+For example, this command will retrieve all instances of the 'ifMtu'
+leaf:
@@ Line 1,545: / Line 2,736: @@
-When interface (or any list) entries are returned by netconfd, they will contain the the entire path back to the root of the YANG module, not just the specified node. Also, any key leafs within a list are added. This is only done if the XPath expression is missing any predicates for key leafs.
+When interface (or any list) entries are returned by netconfd, they will
+contain the the entire path back to the root of the YANG module, not
+just the specified node. Also, any key leafs within a list are added.
+This is only done if the XPath expression is missing any predicates for
+key leafs.
-This is different than XPath 1.0 as used in XSLT. Since NETCONF '''get''' and '''get-config''' operations return complete XML instance documents, not node-sets, the ancestor nodes and naming nodes need to be added.
+This is different than XPath 1.0 as used in XSLT. Since NETCONF
+'''get''' and '''get-config''' operations return complete XML instance
+documents, not node-sets, the ancestor nodes and naming nodes need to be
+added.
      <nowiki># reply shown with --display-mode=plain</nowiki>
@@ Line 1,565: / Line 2,763: @@
 === Special Parameter Handling ===
-Some special handling of YANG data structures is done by the script interpreter.
+Some special handling of YANG data structures is done by the script
+interpreter.
@@ Line 1,571: / Line 2,770: @@
+Some parameters, such as the''' --source '''and '''--target'''
-Some parameters, such as the''' --source '''and '''--target''' parameters in many commands, are actually represented as a container with a single child -- a choice of several leaf nodes. In this situation, just the name of the desired leaf node can be entered (when in idle mode), as the 'contents' of the container parameter.
+parameters in many commands, are actually represented as a container
+with a single child -- a choice of several leaf nodes. In this
+situation, just the name of the desired leaf node can be entered (when
+in idle mode), as the 'contents' of the container parameter.
@@ Line 1,580: / Line 2,783: @@
-If a parameter name exact-match is not found, and a partial match is attempted, then choice and case node names will be ignored, and not cause a match.
+If a parameter name exact-match is not found, and a partial match is
+attempted, then choice and case node names will be ignored, and not
+cause a match.
-Since these nodes never appear in the XML PDUs they are treated as transparent nodes (wrt/ parameter searches) unless they are specified with their full name.
+Since these nodes never appear in the XML PDUs they are treated as
+transparent nodes (wrt/ parameter searches) unless they are specified
+with their full name.
-Parameters that are a choice of several nodes, similar to above, except without a parent container node, (e.g.,''' --help-mode''') can be omitted. The accessible child nodes within the case nodes can be entered directly (e.g., '''sget --target''' parameter).
+Parameters that are a choice of several nodes, similar to above, except
+without a parent container node, (e.g.,''' --help-mode''') can be
+omitted. The accessible child nodes within the case nodes can be entered
+directly (e.g., '''sget --target''' parameter).
- <nowiki># this is not allowed because 'help-mode' is not complete</nowiki>
+ <nowiki># this is not allowed because 'help-mode' is not
+complete</nowiki>
  yangcli> help --command=help --help-mo=brief
@@ Line 1,604: / Line 2,815: @@
-When filling a data structure and a descendant node is entered, which is a YANG list or leaf-list, then multiple entries can be entered. After the node is filled in, there will be a prompt (Y/N, default no) to add more list or leaf-list entries.
+When filling a data structure and a descendant node is entered, which is
+a YANG list or leaf-list, then multiple entries can be entered. After
+the node is filled in, there will be a prompt (Y/N, default no) to add
+more list or leaf-list entries.
@@ Line 1,610: / Line 2,824: @@
-The YANG binary data type is supported. Parameters of this type should be entered in plain text and they will be converted to binary format.
+The YANG binary data type is supported. Parameters of this type should
+be entered in plain text and they will be converted to binary format.
@@ Line 1,616: / Line 2,831: @@
 The 'tab' key is used for context-sensitive command completion:
-* If no command has been started, a list of available commands is printed
+* If no command has been started, a list of available commands is
+printed
-* If a partial command is entered, a list of commands which match the characters entered so far is printed
-* If a command is entered, but no parameters, then a list of available parameters is printed
+* If a partial command is entered, a list of commands which match the
-* If a command is entered, and the cursor is within a command name, then a list of parameters which match the characters entered so far is printed
+characters entered so far is printed
-* If a command is entered, and the cursor is after a command name, but not within a value string, then a list of available parameters is printed
+* If a command is entered, but no parameters, then a list of available
+parameters is printed
-* If a command is entered, and the cursor is within a command value, then a list of possible values which match the characters entered so far is printed. Note that not all data types support value completion at this time.
-* If no values are available, but a default value is known, that value will be printed
+* If a command is entered, and the cursor is within a command name, then
+a list of parameters which match the characters entered so far is
-* If a session is active, and whitespace followed by the forward slash '/' character is entered, a list of top-level data node names is printed. Once a top-level name and a trailing slash '/' character is entered, pressing the tab key again will print the names of the child nodes of the current data node. Only schema-node strings are supported at this time. Auto-completion will not work if predicates are present in the absolute path expression.
+printed
+* If a command is entered, and the cursor is after a command name, but
+not within a value string, then a list of available parameters is
+printed
+* If a command is entered, and the cursor is within a command value,
+then a list of possible values which match the characters entered so far
+is printed. Note that not all data types support value completion at
+this time.
+* If no values are available, but a default value is known, that value
+will be printed
+* If a session is active, and whitespace followed by the forward slash
+'/' character is entered, a list of top-level data node names is
+printed. Once a top-level name and a trailing slash '/' character is
+entered, pressing the tab key again will print the names of the child
+nodes of the current data node. Only schema-node strings are supported
+at this time. Auto-completion will not work if predicates are present in
+the absolute path expression.
 Command list example: no NETCONF session is active:
@@ Line 1,654: / Line 2,886: @@
 === Command Line Editing ===
-The command line parser is based on '''libtecla''', a freely available library.
+The command line parser is based on '''libtecla''', a freely available
+library.
 The home page is located here:
-[http://www.astro.caltech.edu/~mcs/tecla/ http://www.astro.caltech.edu/~mcs/tecla/]
+[http://www.astro.caltech.edu/~mcs/tecla/
+http://www.astro.caltech.edu/~mcs/tecla/]
 The complete user guide for configuring '''libtecla''' is located here:
-[http://www.astro.caltech.edu/~mcs/tecla/tecla.html http://www.astro.caltech.edu/~mcs/tecla/tecla.html]
+[http://www.astro.caltech.edu/~mcs/tecla/tecla.html
+http://www.astro.caltech.edu/~mcs/tecla/tecla.html]
-If the file '''$HOME/.teclarc''' exists, then '''libtecla''' will use it to configure the key bindings.
+If the file '''$HOME/.teclarc''' exists, then '''libtecla''' will use it
+to configure the key bindings.
-By default, '''libtecla''' uses '''emacs''' key bindings. There is no need for any further '''libtecla''' configuration if '''emacs''' mode is desired.
+By default, '''libtecla''' uses '''emacs''' key bindings. There is no
+need for any further '''libtecla''' configuration if '''emacs''' mode is
+desired.
-In order to use the '''vi''' editor key bindings, the '''$HOME/.teclarc''' file must exist, and it must contain the following line:
+In order to use the '''vi''' editor key bindings, the
+'''$HOME/.teclarc''' file must exist, and it must contain the following
+line:
@@ Line 1,676: / Line 2,916: @@
-Custom key bindings are also available. Refer to the '''libtecla''' documentation for more details on command line editing key customization.
+Custom key bindings are also available. Refer to the '''libtecla'''
+documentation for more details on command line editing key
+customization.
-The control key sequence (^F == control key and f key at the same time). The letter is not case-sensitive, so ^F and ^f are the same command.
+The control key sequence (^F == control key and f key at the same time).
+The letter is not case-sensitive, so ^F and ^f are the same command.
-The alt key sequence (M-f == alt key and f key at the same time). The letter is not case-sensitive, so M-F and M-f are the same command.
+The alt key sequence (M-f == alt key and f key at the same time). The
+letter is not case-sensitive, so M-F and M-f are the same command.
@@ Line 1,690: / Line 2,934: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| <center>'''command'''</center>
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| <center>'''description'''</center>
+#000000;border-right:none;padding:0.0382in;"|
+<center>'''command'''</center>
+|
+<center>'''description'''</center>
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| ^F
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| cursor right
+#000000;border-right:none;padding:0.0382in;"| ^F
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| cursor right
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| ^B
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| cursor-left
+#000000;border-right:none;padding:0.0382in;"| ^B
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| cursor-left
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| ^A
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| beginning of line
+#000000;border-right:none;padding:0.0382in;"| ^A
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| beginning of line
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| ^E
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| end of line
+#000000;border-right:none;padding:0.0382in;"| ^E
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| end of line
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| ^U
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| delete line
+#000000;border-right:none;padding:0.0382in;"| ^U
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| delete line
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| M-f
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| forward-word
+#000000;border-right:none;padding:0.0382in;"| M-f
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| forward-word
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| M-b
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| backward word
+#000000;border-right:none;padding:0.0382in;"| M-b
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| backward word
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| ^P
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| up history
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| ^P
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| up history
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| ^N
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| down history
+#000000;border-right:none;padding:0.0382in;"| ^N
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| down history
 |}
 === Command History ===
-Each command line is saved in the command history buffer, unless a password is being entered in parameter mode.
+Each command line is saved in the command history buffer, unless a
+password is being entered in parameter mode.
-By default, the previous history line (if any) will be shown if the ^P key is pressed.
+By default, the previous history line (if any) will be shown if the ^P
+key is pressed.
-By default, the next history line (if any) will be shown if the ^N key is pressed.
+By default, the next history line (if any) will be shown if the ^N key
+is pressed.
-In addition, the '''history''' command can be used to control the command line buffer further. This command has 4 sub-modes:
+In addition, the '''history''' command can be used to control the
+command line buffer further. This command has 4 sub-modes:
 * '''show''': show maximum of N history entries (default is 25)
@@ Line 1,745: / Line 3,033: @@
 * '''load''': load the history buffer from a file
-By default, the command line history buffer is loaded when the program starts, and saved when the program exits. This behavior can be turned off by setting the '''--autohistory''' configuration parameter to 'false'.
+By default, the command line history buffer is loaded when the program
+starts, and saved when the program exits. This behavior can be turned
+off by setting the '''--autohistory''' configuration parameter to
+'false'.
-The '!' character is special when editing commands. If the first character is '!', and it is followed by a number or a non-zero character, the line will be interpreted as a recall request:
+The '!' character is special when editing commands. If the first
+character is '!', and it is followed by a number or a non-zero
+character, the line will be interpreted as a recall request:
-* yangcli> !42 <nowiki>== recall command number 42 (same as recall 42)</nowiki>
+* yangcli> !42 <nowiki>== recall command number 42 (same as recall
+)</nowiki>
-* yangcli> !get <nowiki>== recall the most recent command line starting with 'get'</nowiki>
+* yangcli> !get <nowiki>== recall the most recent command line starting
+with 'get'</nowiki>
-Refer to the Command Reference section for more details on the '''history''' command.
+Refer to the Command Reference section for more details on the
+'''history''' command.
 === Command Responses ===
-The command output and debugging messages within yangcli is controlled by the current log level (error, warn, info, debug, debug2, debug3).
+The command output and debugging messages within yangcli is controlled
+by the current log level (error, warn, info, debug, debug2, debug3).
-If a command is executed by the script interpreter, then a response will be printed, depending on the log level value.
+If a command is executed by the script interpreter, then a response will
+be printed, depending on the log level value.
-If the log level is 'info' or higher, and there were no errors and no response, then the string 'OK' is printed.
+If the log level is 'info' or higher, and there were no errors and no
+response, then the string 'OK' is printed.
@@ Line 1,768: / Line 3,067: @@
-If the log-level is set to 'error' or 'warn', then the 'OK' messages will be suppressed.
+If the log-level is set to 'error' or 'warn', then the 'OK' messages
+will be suppressed.
-If the log level is set to 'debug' or higher, then responses from the server will be echoed to the log (file or STDOUT). <nowiki>The current display mode will be used when printing data structures such as <rpc-error> and <notification> element contents.</nowiki>
+If the log level is set to 'debug' or higher, then responses from the
+server will be echoed to the log (file or STDOUT). <nowiki>The current
+display mode will be used when printing data structures such as
+<rpc-error> and <notification> element contents.</nowiki>
-If an error response is received from the server, it will always be printed to the log.
+If an error response is received from the server, it will always be
+printed to the log.
@@ Line 1,794: / Line 3,098: @@
-Refer the the '''--log-level '''parameter in the CLI Reference for more details.
+Refer the the '''--log-level '''parameter in the CLI Reference for more
+details.
 == NETCONF Sessions ==
-The '''yangcli''' program can be connected to one NETCONF server at a time.
+The '''yangcli''' program can be connected to one NETCONF server at a
+time.
 Run multiple instances of yangcli to control multiple agents at once.
@@ Line 1,803: / Line 3,109: @@
 Use the connect command to start a NETCONF session.
-This section explains how to use '''yangcli''' to manage a NETCONF server, once a session is established.
+This section explains how to use '''yangcli''' to manage a NETCONF
+server, once a session is established.
-<nowiki>When a NETCONF session starts up, a <capability> exchange is done, and the server reports exactly what content it supports. </nowiki>This information is used extensively to customize the session, and report errors and warnings for the session.
+<nowiki>When a NETCONF session starts up, a <capability> exchange is
+done, and the server reports exactly what content it supports.
+</nowiki>This information is used extensively to customize the session,
+and report errors and warnings for the session.
 === Connection Startup Screen ===
-If the''' --log-level''' is set to 'info' of higher, then a startup screen will be displayed when a NETCONF session is started. It contains:
+If the''' --log-level''' is set to 'info' of higher, then a startup
+screen will be displayed when a NETCONF session is started. It contains:
 * startup banner
@@ Line 1,822: / Line 3,133: @@
 * '''with-defaults''' reporting capability reported by the server
-The following example shows a typical startup screen connecting to the '''netconfd''' server:
+The following example shows a typical startup screen connecting to the
+'''netconfd''' server:
@@ Line 1,882: / Line 3,194: @@
-While a NETCONF session is active, the set of available YANG modules will be set to the modules that the server is using, if the '''--autoload '''configuration parameter is enabled.
+While a NETCONF session is active, the set of available YANG modules
+will be set to the modules that the server is using, if the
+'''--autoload '''configuration parameter is enabled.
-<nowiki>If the :schema-retrieval capability is also available on the server, then the <get-schema> operation will be attempted for any YANG module specified in the <hello> message capabilities, but not available to the </nowiki>'''yangcli''' program.
+<nowiki>If the :schema-retrieval capability is also available on the
+server, then the <get-schema> operation will be attempted for any YANG
+module specified in the <hello> message capabilities, but not available
+to the </nowiki>'''yangcli''' program.
+When the server module capabilities are analyzed by the '''yangcli'''
-When the server module capabilities are analyzed by the '''yangcli''' client, the entire YANG module search path is checked for the specific module advertised in the capability. All the modules are partially parsed to check the actual namespace and revision date values. The following fields must exactly match in order for yangcli to use a local YANG module, if '''--autoload'''<nowiki>=true.</nowiki>
+client, the entire YANG module search path is checked for the specific
+module advertised in the capability. All the modules are partially
+parsed to check the actual namespace and revision date values. The
+following fields must exactly match in order for yangcli to use a local
+YANG module, if '''--autoload'''<nowiki>=true.</nowiki>
 * module name
@@ Line 1,892: / Line 3,214: @@
 * module namespace
-If the namespace URI value is different, it indicates that there is either a bug in one of the conflicting YANG modules, or that two different naming authorities picked the same module name. In this case, a warning will be generated during session initialization.
+If the namespace URI value is different, it indicates that there is
+either a bug in one of the conflicting YANG modules, or that two
+different naming authorities picked the same module name. In this case,
+a warning will be generated during session initialization.
-Any data returned from the server for YANG modules not currently available will be treated as a YANG 'anyxml' node, instead of the (unknown) YANG data type.
+Any data returned from the server for YANG modules not currently
+available will be treated as a YANG 'anyxml' node, instead of the
+(unknown) YANG data type.
-<nowiki>If the module contains YANG features that are not advertised in the <capabilities> exchange, then those data definitions will not be available (by default) for use in </nowiki>'''yangcli''' commands.
+<nowiki>If the module contains YANG features that are not advertised in
+the <capabilities> exchange, then those data definitions will not be
+available (by default) for use in </nowiki>'''yangcli''' commands.
-If the module contains an object with a 'when' statement, and the 'when' XPath expression evaluates to 'false', then that data definition will not be available (by default) for use in '''yangcli''' commands.
+If the module contains an object with a 'when' statement, and the 'when'
+XPath expression evaluates to 'false', then that data definition will
+not be available (by default) for use in '''yangcli''' commands.
-The '''help'''<nowiki> command will be tailored to the modules, capabilities, features, and module deviations reported by the server in <capability> exchange.</nowiki>
+The '''help'''<nowiki> command will be tailored to the modules,
+capabilities, features, and module deviations reported by the server in
+<capability> exchange.</nowiki>
 === Retrieving Data ===
-There are 6 commands available to retrieve generic data (i.e., an arbitrary subset of an entire NETCONF database):
+There are 6 commands available to retrieve generic data (i.e., an
+arbitrary subset of an entire NETCONF database):
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| <center>'''command'''</center>
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| <center>'''description'''</center>
+#000000;border-right:none;padding:0.0382in;"|
+<center>'''command'''</center>
+|
+<center>'''description'''</center>
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| get
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| <nowiki>raw NETCONF <get> operation</nowiki>
+#000000;border-right:none;padding:0.0382in;"| get
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| <nowiki>raw NETCONF <get> operation</nowiki>
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| get-config
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| <nowiki>raw NETCONF <get-config> operation</nowiki>
+#000000;border-right:none;padding:0.0382in;"| get-config
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| <nowiki>raw NETCONF <get-config>
+operation</nowiki>
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| sget
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| <nowiki>high-level subtree filter, using the <get> protocol operation</nowiki>
+#000000;border-right:none;padding:0.0382in;"| sget
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| <nowiki>high-level subtree filter, using the
+<get> protocol operation</nowiki>
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| sget-config
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| <nowiki>high-level subtree filter, using the <get-config> protocol operation</nowiki>
+#000000;border-right:none;padding:0.0382in;"| sget-config
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| <nowiki>high-level subtree filter, using the
+<get-config> protocol operation</nowiki>
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| xget
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| <nowiki>high-level XPath filter, using the <get> protocol operation</nowiki>
+#000000;border-right:none;padding:0.0382in;"| xget
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| <nowiki>high-level XPath filter, using the
+<get> protocol operation</nowiki>
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| xget-config
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| <nowiki>high-level XPath filter, using the <get-config> protocol operation</nowiki>
+#000000;border-right:none;padding:0.0382in;"| xget-config
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| <nowiki>high-level XPath filter, using the
+<get-config> protocol operation</nowiki>
 |}
+All the high-level retrieval operations support the'''
-All the high-level retrieval operations support the''' $$with-defaults''' system variable. <nowiki>The <with-defaults> parameter will be added the the NETCONF PDU if this variable is set to a value other than 'none' (the default). </nowiki>This system variable will be used as the default if not entered directly.
+$$with-defaults''' system variable. <nowiki>The <with-defaults>
+parameter will be added the the NETCONF PDU if this variable is set to a
+value other than 'none' (the default). </nowiki>This system variable
+will be used as the default if not entered directly.
@@ Line 1,942: / Line 3,313: @@
-This parameter can also be specified directly, each time the command is used.
+This parameter can also be specified directly, each time the command is
+used.
@@ Line 1,948: / Line 3,320: @@
+The '''$$bad-data''' system variable is used to control how invalid
-The '''$$bad-data''' system variable is used to control how invalid operations and data are sent to the server. The '''xget''' and '''xget-config''' commands are affected by this parameter. If the ''':xpath '''capability was not advertised by the server when the session started, an error or warning may occur if these commands are used.
+operations and data are sent to the server. The '''xget''' and
+'''xget-config''' commands are affected by this parameter. If the
+''':xpath '''capability was not advertised by the server when the
+session started, an error or warning may occur if these commands are
+used.
-If any data is received that '''yangcli''' does not understand, then a warning message will be printed and the data will be treated as if it was defined with the YANG ''''anyxml'''' data type.
+If any data is received that '''yangcli''' does not understand, then a
+warning message will be printed and the data will be treated as if it
+was defined with the YANG ''''anyxml'''' data type.
 === Modifying Data ===
-The following commands are available to modify generic data (i.e., an arbitrary subset of an entire NETCONF database):
+The following commands are available to modify generic data (i.e., an
+arbitrary subset of an entire NETCONF database):
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| <center>'''command'''</center>
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| <center>'''description'''</center>
+#000000;border-right:none;padding:0.0382in;"|
+<center>'''command'''</center>
+|
+<center>'''description'''</center>
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| commit
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| <nowiki>raw NETCONF <commit> operation</nowiki>
+#000000;border-right:none;padding:0.0382in;"| commit
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| <nowiki>raw NETCONF <commit>
+operation</nowiki>
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| create
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| <nowiki>high-level <edit-config> operation, with nc:operation='create'</nowiki>
+#000000;border-right:none;padding:0.0382in;"| create
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| <nowiki>high-level <edit-config> operation,
+with nc:operation='create'</nowiki>
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| delete
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| <nowiki>high-level <edit-config> operation, with nc:operation='delete'</nowiki>
+#000000;border-right:none;padding:0.0382in;"| delete
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| <nowiki>high-level <edit-config> operation,
+with nc:operation='delete'</nowiki>
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| delete-config
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| <nowiki>raw NETCONF <delete-config> operation</nowiki>
+#000000;border-right:none;padding:0.0382in;"| delete-config
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| <nowiki>raw NETCONF <delete-config>
+operation</nowiki>
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| discard-changes
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| <nowiki>raw NETCONF <discard-changes> operation</nowiki>
+#000000;border-right:none;padding:0.0382in;"| discard-changes
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| <nowiki>raw NETCONF <discard-changes>
+operation</nowiki>
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| edit-config
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| <nowiki>raw NETCONF <edit-config> operation</nowiki>
+#000000;border-right:none;padding:0.0382in;"| edit-config
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| <nowiki>raw NETCONF <edit-config>
+operation</nowiki>
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| fill
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| fill a variable for re-use in other operations
+#000000;border-right:none;padding:0.0382in;"| fill
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| fill a variable for re-use in other
+operations
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| insert
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| <nowiki>high-level <edit-config> operation, with YANG insert operation extensions</nowiki>
+#000000;border-right:none;padding:0.0382in;"| insert
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| <nowiki>high-level <edit-config> operation,
+with YANG insert operation extensions</nowiki>
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| lock
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| lock a NETCONF database
+#000000;border-right:none;padding:0.0382in;"| lock
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| lock a NETCONF database
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| merge
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| <nowiki>high-level <edit-config> operation, with nc:operation='merge'</nowiki>
+#000000;border-right:none;padding:0.0382in;"| merge
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| <nowiki>high-level <edit-config> operation,
+with nc:operation='merge'</nowiki>
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| replace
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| <nowiki>high-level <edit-config> operation, with nc:operation='replace'</nowiki>
+#000000;border-right:none;padding:0.0382in;"| replace
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| <nowiki>high-level <edit-config> operation,
+with nc:operation='replace'</nowiki>
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| save
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| High level save operation, depending on the default target (candidate or running)
+#000000;border-right:none;padding:0.0382in;"| save
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| High level save operation, depending on the
+default target (candidate or running)
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| unlock
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| unlock a NETCONF database
+#000000;border-right:none;padding:0.0382in;"| unlock
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| unlock a NETCONF database
 |}
-All the high-level editing operations use the '''--target''' parameter reported by the server when the session started up. If the server did not report the ''':candidate''' or ''':writable-running''' capabilities, then there will be no writable target, and an error will occur if these commands are entered.
+All the high-level editing operations use the '''--target''' parameter
+reported by the server when the session started up. If the server did
+not report the ''':candidate''' or ''':writable-running''' capabilities,
+then there will be no writable target, and an error will occur if these
+commands are entered.
+All the high-level editing operations support the''' $$default-operation
-All the high-level editing operations support the''' $$default-operation '''system variable. <nowiki>The <default-operation> parameter will be added the the NETCONF <edit-config> PDU if this variable is set to a value other than 'not-used'. </nowiki>The default is the enumeration 'none', which means do not use any default operation, and only use the explicit '''nc:operation''' attribute.
+'''system variable. <nowiki>The <default-operation> parameter will be
+added the the NETCONF <edit-config> PDU if this variable is set to a
+value other than 'not-used'. </nowiki>The default is the enumeration
+'none', which means do not use any default operation, and only use the
+explicit '''nc:operation''' attribute.
-All the high-level editing operations support the''' $$test-option '''system variable. <nowiki>The <test-option> parameter will be added the the NETCONF <edit-config> PDU if this variable is set to a value other than 'none' (the default). </nowiki>This system variable will be used as the default if not entered directly.
+All the high-level editing operations support the''' $$test-option
+'''system variable. <nowiki>The <test-option> parameter will be added
+the the NETCONF <edit-config> PDU if this variable is set to a value
+other than 'none' (the default). </nowiki>This system variable will be
+used as the default if not entered directly.
@@ Line 2,027: / Line 3,487: @@
-This parameter can also be specified directly, each time the command is used.
+This parameter can also be specified directly, each time the command is
+used.
  $newvalue = 1518
@@ Line 2,036: / Line 3,497: @@
-All the high-level retrieval operations support the''' $$error-option '''system variable. <nowiki>The <error-option> parameter will be added the the NETCONF <edit-config> PDU if this variable is set to a value other than 'none' (the default). </nowiki>This system variable will be used as the default if not entered directly.
+All the high-level retrieval operations support the''' $$error-option
+'''system variable. <nowiki>The <error-option> parameter will be added
+the the NETCONF <edit-config> PDU if this variable is set to a value
+other than 'none' (the default). </nowiki>This system variable will be
+used as the default if not entered directly.
@@ Line 2,044: / Line 3,509: @@
-This parameter can also be specified directly, each time the command is used.
+This parameter can also be specified directly, each time the command is
+used.
@@ Line 2,052: / Line 3,518: @@
-The high level '''save''' command is mapped to other commands, depending on the capabilities reported by the server.
+The high level '''save''' command is mapped to other commands, depending
+on the capabilities reported by the server.
@@ Line 2,059: / Line 3,526: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| <center>'''capabilities'''</center>
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| <center>'''real command(s)'''</center>
+#000000;border-right:none;padding:0.0382in;"|
+<center>'''capabilities'''</center>
+|  <center>'''real
+command(s)'''</center>
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| :candidate
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| commit
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| :candidate
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| commit
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| :writable-running
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| <nowiki><none></nowiki>
+#000000;border-right:none;padding:0.0382in;"| :writable-running
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| <nowiki><none></nowiki>
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| :startup
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| copy-config --source=running \ --target=startup
+#000000;border-right:none;padding:0.0382in;"| :startup
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| copy-config --source=running \
+--target=startup
 |}
 === Using Notifications ===
-The '''create-subscription''' command is used to start receiving notifications.
+The '''create-subscription''' command is used to start receiving
+notifications.
+The '''netconfd'''<nowiki> server will include a <sequence-id> element
-The '''netconfd'''<nowiki> server will include a <sequence-id> element in any notification that is saved in the replay buffer. </nowiki><nowiki>This unsigned integer can be used to help debug notification filters (i.e., if non-consecutive <sequence-id> values are received, then the notification was filtered, or dropped due to access control policy).</nowiki>
+in any notification that is saved in the replay buffer.
+</nowiki><nowiki>This unsigned integer can be used to help debug
+notification filters (i.e., if non-consecutive <sequence-id> values are
+received, then the notification was filtered, or dropped due to access
+control policy).</nowiki>
+If any replay notifications are desired, then the''' --startTime'''
-If any replay notifications are desired, then the''' --startTime''' parameter must be included. <nowiki>At the end of the stored notifications, the server will send the <replayComplete> event. </nowiki>This notification type is not saved, and will not be found in the server replay buffer, if replay is supported by the server. The '''netconfd'''<nowiki> server will not include a <sequence-id> element in this notification type.</nowiki>
+parameter must be included. <nowiki>At the end of the stored
+notifications, the server will send the <replayComplete> event.
+</nowiki>This notification type is not saved, and will not be found in
+the server replay buffer, if replay is supported by the server. The
+'''netconfd'''<nowiki> server will not include a <sequence-id> element
+in this notification type.</nowiki>
+If the notification subscription should stop at a certain time, then the
-If the notification subscription should stop at a certain time, then the '''--stopTime''' parameter must be included. <nowiki>At the end of the stored notifications, the server will send the <replayComplete> event, followed by the <notificationComplete> event. </nowiki>. This notification type is not saved, and will not be found in the server replay buffer, if replay is supported by the server. The '''netconfd'''<nowiki> server will not include a <sequence-id> element in this notification type.</nowiki>
+'''--stopTime''' parameter must be included. <nowiki>At the end of the
+stored notifications, the server will send the <replayComplete> event,
+followed by the <notificationComplete> event. </nowiki>. This
+notification type is not saved, and will not be found in the server
+replay buffer, if replay is supported by the server. The
+'''netconfd'''<nowiki> server will not include a <sequence-id> element
+in this notification type.</nowiki>
-Notifications are printed to the log, using the current '''$$display-mode''' system variable setting, when and if they are received.
+Notifications are printed to the log, using the current
+'''$$display-mode''' system variable setting, when and if they are
+received.
-Notifications are also logged. Use the '''eventlog''' command to access the notifications stored in the event log.
+Notifications are also logged. Use the '''eventlog''' command to access
+the notifications stored in the event log.
 === Configuration Parameters That Affect Sessions ===
-The '''--server''',''' --user''', and '''--password''' configuration parameters can be used to start a NETCONF session automatically at startup time. The connect command will only be attempted at startup time if the '''--server '''parameter is present.
+The '''--server''',''' --user''', and '''--password''' configuration
+parameters can be used to start a NETCONF session automatically at
+startup time. The connect command will only be attempted at startup time
+if the '''--server '''parameter is present.
-If all 3 of these parameters are present at startup time, then no interactive prompting for additional optional parameters will be done. Instead the connect command will be invoked right away.
+If all 3 of these parameters are present at startup time, then no
+interactive prompting for additional optional parameters will be done.
+Instead the connect command will be invoked right away.
-During normal operation, the '''--optional''' configuration parameter, or the '''$$optional''' system variable, can be used to control interactive prompting for optional parameters.
+During normal operation, the '''--optional''' configuration parameter,
+or the '''$$optional''' system variable, can be used to control
+interactive prompting for optional parameters.
-The '''--server''' parameter is saved in the '''$$server''' system variable, which can be overwritten at any time. If set, this will be used as the initial default value for the '''--server''' parameter in the '''connect''' command.
+The '''--server''' parameter is saved in the '''$$server''' system
+variable, which can be overwritten at any time. If set, this will be
+used as the initial default value for the '''--server''' parameter in
+the '''connect''' command.
+The '''--fixorder''' configuration parameter can be used to control XML
-The '''--fixorder''' configuration parameter can be used to control XML PDU ordering. If set to 'true', then the PDU will be reordered (if needed),to use the canonical order, according to the YANG specification. If 'false', the order parameters are entered at the command line will be their NETCONF PDU order as well. The default is 'true'. To send the server incorrectly ordered data structures on purposes, set this parameter to 'false'.
+PDU ordering. If set to 'true', then the PDU will be reordered (if
+needed),to use the canonical order, according to the YANG specification.
+If 'false', the order parameters are entered at the command line will be
+their NETCONF PDU order as well. The default is 'true'. To send the
+server incorrectly ordered data structures on purposes, set this
+parameter to 'false'.
-The '''--user''' parameter is saved in the '''$$user''' system variable, which can be overwritten at any time. If set, this will be used as the initial default value for the '''--user''' parameter in the '''connect''' command.
+The '''--user''' parameter is saved in the '''$$user''' system variable,
+which can be overwritten at any time. If set, this will be used as the
+initial default value for the '''--user''' parameter in the
+'''connect''' command.
+The '''--with-defaults''' configuration parameter, or the
-The '''--with-defaults''' configuration parameter, or the '''$$with-defaults''' system variable, can be used to set the default value for the 'with-defaults' parameter extension for the NETCONF '''get''', '''get-config''', and '''copy-config''' protocol operations. The default is 'none'.
+'''$$with-defaults''' system variable, can be used to set the default
+value for the 'with-defaults' parameter extension for the NETCONF
+'''get''', '''get-config''', and '''copy-config''' protocol operations.
+The default is 'none'.
-The '''--error-option''' configuration parameter, or the '''$$error-option''' system parameter, can be used to set the default value for the '''--error-option''' parameter for the NETCONF edit-config protocol operation. The default is 'none'.
+The '''--error-option''' configuration parameter, or the
+'''$$error-option''' system parameter, can be used to set the default
+value for the '''--error-option''' parameter for the NETCONF edit-config
+protocol operation. The default is 'none'.
-The '''--test-option''' configuration parameter, or the '''$$test-option''' system parameter, can be used to set the default value for the '''--test-option''' parameter for the NETCONF edit-config protocol operation. The default is 'none'.
+The '''--test-option''' configuration parameter, or the
+'''$$test-option''' system parameter, can be used to set the default
+value for the '''--test-option''' parameter for the NETCONF edit-config
+protocol operation. The default is 'none'.
+The '''--bad-data''' configuration parameter, or the '''$$bad-data'''
-The '''--bad-data''' configuration parameter, or the '''$$bad-data''' system variable, can be used to control how '''yangcli''' handles parameter values that are known to be invalid, or usage of optional protocol operations that the current session does not support. The default value is 'check'. To use '''yangcli''' in a testing mode to send the server incorrect data on purpose, set this parameter to 'warn' or 'ignore'.
+system variable, can be used to control how '''yangcli''' handles
+parameter values that are known to be invalid, or usage of optional
+protocol operations that the current session does not support. The
+default value is 'check'. To use '''yangcli''' in a testing mode to send
+the server incorrect data on purpose, set this parameter to 'warn' or
+'ignore'.
 === Trouble-shooting NETCONF Session Problems ===
-If the NETCONF session does not start for any reason, one or more error messages will be printed, and the prompt will indicate 'idle' mode. This section assumes that the server is '''netconfd''', and these debugging steps may not apply to all NETCONF agents.
+If the NETCONF session does not start for any reason, one or more error
+messages will be printed, and the prompt will indicate 'idle' mode. This
+section assumes that the server is '''netconfd''', and these debugging
+steps may not apply to all NETCONF agents.
@@ Line 2,124: / Line 3,668: @@
 * make sure a firewall is not blocking TCP port 830
 ** try to connect to the NETCONF server using the '''--port=22''' option
-* make sure the netconf-subsystem is configured correctly in /etc/ssh/sshd_configthere should be the proper configuration commands for NETCONF to work. For example, the '''netconfd''' server configuration might look like this:
+* make sure the netconf-subsystem is configured correctly in
+/etc/ssh/sshd_configthere should be the proper configuration commands
+for NETCONF to work. For example, the '''netconfd''' server
+configuration might look like this:
 *
@@ Line 2,132: / Line 3,679: @@
-* make sure the '''netconfd''' server is running. Use the unix 'ps' command, or check the '''netconfd''' log file, to make sure it is running.<br/>
+* make sure the '''netconfd''' server is running. Use the unix 'ps'
+command, or check the '''netconfd''' log file, to make sure it is
+running.<br/>
@@ Line 2,144: / Line 3,693: @@
 * make sure the password is correct
-** This must be the valid password (in /etc/passwd or /etc/shadow) for the specified user name
+** This must be the valid password (in /etc/passwd or /etc/shadow) for
+the specified user name
 '''If the NETCONF session stops responding:'''
@@ Line 2,155: / Line 3,705: @@
 '''If the NETCONF server is not accepting a certain command:'''
-* make sure the command (or parameters used in the command) is actually supported by the server.
+* make sure the command (or parameters used in the command) is actually
+supported by the server.
-** There may be features, when statements, or deviation statements that indicate the server does not support the command or one or more of its parameters.
+** There may be features, when statements, or deviation statements that
-* make sure that access control configured on the server is not blocking the command. The error-tag should be 'access-denied' in this case.
+indicate the server does not support the command or one or more of its
+parameters.
+* make sure that access control configured on the server is not blocking
+the command. The error-tag should be 'access-denied' in this case.
-'''<nowiki>If the NETCONF server is not returning the expected data in a <get> or <get-config> protocol operation::</nowiki>'''
+'''<nowiki>If the NETCONF server is not returning the expected data in a
+<get> or <get-config> protocol operation::</nowiki>'''
 * Make sure all the parameters are supported by the server
-** the''' :xpath'''<nowiki> capability must be advertised by the server to use the 'select' attribute in the <get> or <get-config> operations</nowiki>
+** the''' :xpath'''<nowiki> capability must be advertised by the server
+to use the 'select' attribute in the <get> or <get-config>
-** the ''':with-defaults'''<nowiki> capability must be advertised by the server to use the <with-defaults> parameter</nowiki>
+operations</nowiki>
-* if using a filter, try to retrieve the data without a filter and see if it is there
+** the ''':with-defaults'''<nowiki> capability must be advertised by the
-* make sure that access control configured on the server is not blocking the retrieval. There will not be any error reported in this case. <nowiki>The server will simply skip over any unauthorized data, and leave it out of the <rpc-reply>.</nowiki>
+server to use the <with-defaults> parameter</nowiki>
-* set the logging level to debug2 or higher, and look closely at the PDUs being sent to the server. Set the display mode to a value other than 'plain' to make sure the correct namespaces are being used in the request.
+* if using a filter, try to retrieve the data without a filter and see
+if it is there
+* make sure that access control configured on the server is not blocking
+the retrieval. There will not be any error reported in this case.
+<nowiki>The server will simply skip over any unauthorized data, and
+leave it out of the <rpc-reply>.</nowiki>
+* set the logging level to debug2 or higher, and look closely at the
+PDUs being sent to the server. Set the display mode to a value other
+than 'plain' to make sure the correct namespaces are being used in the
+request.
-'''<nowiki>If an <edit-config> operation is failing unexpectedly:</nowiki>'''
+'''<nowiki>If an <edit-config> operation is failing
+unexpectedly:</nowiki>'''
-* make sure that access control configured on the server is not blocking the request. The error-tag should be 'access-denied' in this case.
+* make sure that access control configured on the server is not blocking
+the request. The error-tag should be 'access-denied' in this case.
 * make sure an unsupported parameter or parameter value is not used
-** <nowiki><test-option> is not supported unless the </nowiki>''':validate''' capability is advertised by the server
+** <nowiki><test-option> is not supported unless the
-** <nowiki><error-option> = 'rollback-on-error' is not supported unless the </nowiki>''':rollback-on-error''' capability is advertised by the server
+</nowiki>''':validate''' capability is advertised by the server
+** <nowiki><error-option> = 'rollback-on-error' is not supported unless
-* if the request contains an edit to a nested data structure, make sure the parent data structure(s) are in place as expected. <nowiki>The <default-operation> parameter is set to 'none' in the high level editing operations, so any data 'above' the edited data must already exist.</nowiki>
+the </nowiki>''':rollback-on-error''' capability is advertised by the
-* set the logging level to debug2 or higher, and look closely at the PDUs being sent to the server. Set the display mode to a value other than 'plain' to make sure the correct namespaces are being used in the request.
+server
+* if the request contains an edit to a nested data structure, make sure
+the parent data structure(s) are in place as expected. <nowiki>The
+<default-operation> parameter is set to 'none' in the high level editing
+operations, so any data 'above' the edited data must already
+exist.</nowiki>
+* set the logging level to debug2 or higher, and look closely at the
+PDUs being sent to the server. Set the display mode to a value other
+than 'plain' to make sure the correct namespaces are being used in the
+request.
 == Command Reference ==
-This section describes all the '''yangcli''' local and remote commands built-in when using the '''netconfd''' server.
+This section describes all the '''yangcli''' local and remote commands
+built-in when using the '''netconfd''' server.
-There may be more or less commands available, depending on the YANG modules actually loaded at the time.
+There may be more or less commands available, depending on the YANG
+modules actually loaded at the time.
-The specific NETCONF capabilities needed are listed for each remote command. No capabilities are ever needed for a local command.
+The specific NETCONF capabilities needed are listed for each remote
+command. No capabilities are ever needed for a local command.
-It is possible that other servers will support protocol operations that '''netconfd''' does not support. If yangcli has the YANG file available for the module, then it can be managed with the high level commands. Low-level commands can still be used with external data (e.g., @mydatafile.xml).
+It is possible that other servers will support protocol operations that
+'''netconfd''' does not support. If yangcli has the YANG file available
+for the module, then it can be managed with the high level commands.
+Low-level commands can still be used with external data (e.g.,
+@mydatafile.xml).
-Any YANG '''rpc''' statement can be used as a remote '''yangcli''' command. Refer to the server vendor documentation for details on the protocol operations, database contents, and notification definitions that they support.
+Any YANG '''rpc''' statement can be used as a remote '''yangcli'''
+command. Refer to the server vendor documentation for details on the
+protocol operations, database contents, and notification definitions
+that they support.
 === alias ===
-The '''alias''' command is used to set or display a specific command alias, or display all command aliases if no parameter is given. It is similar to the 'alias' command in unix shells such as 'bash'.
+The '''alias''' command is used to set or display a specific command
+alias, or display all command aliases if no parameter is given. It is
+similar to the 'alias' command in unix shells such as 'bash'.
 There are 3 forms of the '''alias''' command:
 # '''alias''': display all command aliases in memory
-# '''alias <nowiki><name></nowiki>''': display the command alias with the specified name
+# '''alias <nowiki><name></nowiki>''': display the command alias with
+the specified name
-# '''<nowiki>alias <name>=<value></nowiki>''': set the command alias with the specified name to the string value
+# '''<nowiki>alias <name>=<value></nowiki>''': set the command alias
+with the specified name to the string value
 Use the '''unset''' command to delete an alias.
@@ Line 2,203: / Line 3,794: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| local
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  local
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| var
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| var
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| status
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| status
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yangcli.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yangcli.yang
 |}
@@ Line 2,234: / Line 3,847: @@
 ** usage: optional
 ** default: none
-** The ''''var'''' string must contain either a valid alias name or a string setting an alias. There cannot be any whitespace between the '=' and other characters when setting an alias. The alias value must be quoted if it contains whitespace.
+** The ''''var'''' string must contain either a valid alias name or a
+string setting an alias. There cannot be any whitespace between the '='
-*** A double-quoted string can contain single quotes: <nowiki>alias get-eth0=”xget /interfaces/interface[name='eth0']”</nowiki>
+and other characters when setting an alias. The alias value must be
-*** A single-quoted string can contain double quotes: <nowiki>alias get-eth0='xget /interfaces/interface[name=”eth0”]'</nowiki>
+quoted if it contains whitespace.
-*** <nowiki>An unquoted string can be used if the <value> does not contain any whitespace:</nowiki> alias gc=get-config
+*** A double-quoted string can contain single quotes: <nowiki>alias
+get-eth0=”xget /interfaces/interface[name='eth0']”</nowiki>
+*** A single-quoted string can contain double quotes: <nowiki>alias
+get-eth0='xget /interfaces/interface[name=”eth0”]'</nowiki>
+*** <nowiki>An unquoted string can be used if the <value> does not
+contain any whitespace:</nowiki> alias gc=get-config
 Positive Response:
@@ Line 2,268: / Line 3,887: @@
 === aliases ===
-The '''aliases '''command is used to load, save, or clear the command aliases, or display all command aliases if no parameter is given.
+The '''aliases '''command is used to load, save, or clear the command
+aliases, or display all command aliases if no parameter is given.
 There are 4 forms of the '''aliases''' command:
-# '''<nowiki>aliases [show]</nowiki>''': display all command aliases in memory
+# '''<nowiki>aliases [show]</nowiki>''': display all command aliases in
+memory
 # '''aliases clear''': clear all command aliases in memory
-# '''<nowiki>aliases save [alias-filespec]</nowiki>''': save the command aliases in memory in an '.aliases' file.
+# '''<nowiki>aliases save [alias-filespec]</nowiki>''': save the command
-# '''<nowiki>aliases load [alias-filespec]</nowiki>''': load the command aliases from an '.aliases' file into memory.
+aliases in memory in an '.aliases' file.
+# '''<nowiki>aliases load [alias-filespec]</nowiki>''': load the command
+aliases from an '.aliases' file into memory.
 <center>'''aliases command'''</center>
@@ Line 2,281: / Line 3,904: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| local
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  local
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| status
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| status
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yangcli.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yangcli.yang
 |}
@@ Line 2,313: / Line 3,958: @@
 ** default: show
 ** '''clear'''
-*** Delete all aliases from memory. This will not affect the aliases file until the ''''aliases''' save' command is used, or the program exits and the '''–autoaliases''' parameter is set to 'true'.
+*** Delete all aliases from memory. This will not affect the aliases
+file until the ''''aliases''' save' command is used, or the program
+exits and the '''–autoaliases''' parameter is set to 'true'.
 ** '''load'''<nowiki> [alias-filespec]</nowiki>
-*** Load an aliases file into memory. If the 'alias-filespec' parameter is not given, then the default aliases file ($HOME/.yuma/.yangcli_aliases) will be used.
+*** Load an aliases file into memory. If the 'alias-filespec' parameter
+is not given, then the default aliases file
+($HOME/.yuma/.yangcli_aliases) will be used.
 ** '''save'''<nowiki> [alias-filespec]</nowiki>
-*** Save the command aliases into memory to an alias file. If the 'alias-filespec' parameter is not given, then the default aliases file ($HOME/.yuma/.yangcli_aliases) will be used.
+*** Save the command aliases into memory to an alias file. If the
+'alias-filespec' parameter is not given, then the default aliases file
+($HOME/.yuma/.yangcli_aliases) will be used.
 ** '''show'''
 *** Displays all aliases in memory.
@@ Line 2,349: / Line 4,000: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| local
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  local
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| dir
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| dir
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| status
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| status
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yangcli.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yangcli.yang
 |}
@@ Line 2,404: / Line 4,077: @@
 === close-session ===
-The '''close-session''' command is used to terminate the current NETCONF session. A NETCONF server should always accept this command if it is valid, and not reject it due to access control enforcement or if the server is in notification delivery mode.
+The '''close-session''' command is used to terminate the current NETCONF
+session. A NETCONF server should always accept this command if it is
+valid, and not reject it due to access control enforcement or if the
+server is in notification delivery mode.
@@ Line 2,411: / Line 4,087: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| remote
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  remote
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| status
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| status
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yuma-netconf.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yuma-netconf.yang
 |}
@@ Line 2,442: / Line 4,140: @@
 Positive Response:
-* the session is terminated and the command prompt is changed to indicate idle mode
+* the session is terminated and the command prompt is changed to
+indicate idle mode
 Negative Response:
-* <nowiki>an <rpc-error> message will be printed describing the error</nowiki>
+* <nowiki>an <rpc-error> message will be printed describing the
+error</nowiki>
 Usage:
@@ Line 2,462: / Line 4,162: @@
 === commit ===
-The '''commit'''<nowiki> command is used to save the edits in the <candidate> database into the <running> database. </nowiki>If there are no edits it will have no effect.
+The '''commit'''<nowiki> command is used to save the edits in the
+<candidate> database into the <running> database. </nowiki>If there are
+no edits it will have no effect.
 <center>'''commit command'''</center>
@@ Line 2,468: / Line 4,170: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| remote
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  remote
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 2
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 2
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| status
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| status
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yuma-netconf.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yuma-netconf.yang
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Capabilities needed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| :candidate
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Capabilities needed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| :candidate
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Capabilities optional:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| :confirmed-commit
+#000000;border-right:none;padding:0.0403in;"| Capabilities optional:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| :confirmed-commit
 |}
@@ Line 2,508: / Line 4,240: @@
 ** default: none
 ** capabilities needed:''' ''':confirmed-commit
-** This parameter requests a confirmed commit procedure. The server will expect another '''commit''' command before the '''confirm-timeout''' time period expires.
+** This parameter requests a confirmed commit procedure. The server will
+expect another '''commit''' command before the '''confirm-timeout'''
+time period expires.
 * '''confirm-timeout'''
@@ Line 2,519: / Line 4,253: @@
 *
-** This is the number of seconds to request before the timeout.The ''''confirmed'''' leaf must also be present for this parameter to have any affect.
+** This is the number of seconds to request before the timeout.The
+''''confirmed'''' leaf must also be present for this parameter to have
+any affect.
 * '''persist'''
 ** type: string
@@ Line 2,527: / Line 4,263: @@
 ** type: string
 ** usage: optional
-** persist ID used to conform a previously started the confirmed commit procedure
+** persist ID used to conform a previously started the confirmed commit
+procedure
 Positive Response:
-* the session is terminated and the command prompt is changed to indicate idle mode
+* the session is terminated and the command prompt is changed to
+indicate idle mode
 Negative Response:
-* <nowiki>an <rpc-error> message will be printed describing the error</nowiki>
+* <nowiki>an <rpc-error> message will be printed describing the
+error</nowiki>
 Usage:
@@ Line 2,551: / Line 4,290: @@
 === connect ===
-The '''connect''' command is used to start a session with a NETCONF server.
+The '''connect''' command is used to start a session with a NETCONF
+server.
-If there already is a NETCONF session active, then an error message will be printed and the command will not be executed.
+If there already is a NETCONF session active, then an error message will
+be printed and the command will not be executed.
 <center>'''connect command'''</center>
@@ Line 2,559: / Line 4,300: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| remote
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  remote
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| server
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| server
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 3
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 3
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 8
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 8
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| status
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| status
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yangcli.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yangcli.yang
 |}
@@ Line 2,589: / Line 4,352: @@
 ** type: inet:ip-address (string containing IP address or DNS name
 ** usage: mandatory
-** default: previous server used, if any, will be presented as the default, but not used automatically
+** default: previous server used, if any, will be presented as the
+default, but not used automatically
 ** This parameter specifies the server address for the session.
@@ Line 2,595: / Line 4,359: @@
 ** type: string (ncx:password)
 ** usage: mandatory
-** default: previous password used, if any, will be presented as the default, but not used automatically
+** default: previous password used, if any, will be presented as the
+default, but not used automatically
-** This parameter specifies the password string to use to establish the session. It will not be echoed in parameter mode or saved in the command history buffer.
+** This parameter specifies the password string to use to establish the
+session. It will not be echoed in parameter mode or saved in the command
+history buffer.
 * '''port'''
 ** type: uint16
 ** usage: optional
 ** default: 830
-** This parameter specifies the TCP port number that should be used for the session.
+** This parameter specifies the TCP port number that should be used for
+the session.
 * '''timeout'''
-** type: uint32 (0 = no timeout, otherwise the number of seconds to wait)
+** type: uint32 (0 = no timeout, otherwise the number of seconds to
+wait)
 ** usage: optional
-** default: set to the '''$$timeout''' system variable, default 30 seconds
+** default: set to the '''$$timeout''' system variable, default 30
+seconds
-** This parameter specifies the number of seconds to wait for a response from the server before giving up. The session will not be dropped if a remote command times out, but any late response will be dropped. A value of zero means no timeout should be used, and '''yangcli''' will wait forever for a response.
+** This parameter specifies the number of seconds to wait for a response
+from the server before giving up. The session will not be dropped if a
+remote command times out, but any late response will be dropped. A value
+of zero means no timeout should be used, and '''yangcli''' will wait
+forever for a response.
 * '''user'''
 ** type: string
 ** usage: mandatory
-** default: previous user name used, if any, will be presented as the default, but not used automatically
+** default: previous user name used, if any, will be presented as the
+default, but not used automatically
-** This parameter specifies the user name to use for the session. This must be a valid user name on the NETCONF server.
+** This parameter specifies the user name to use for the session. This
+must be a valid user name on the NETCONF server.
 * '''protocols'''
 ** type: bits (netconf1.0 netconf1.1)
 ** usage: optional
 ** default: '''--protocols''' configuration parameter setting
-** Specifies which NETCONF protocol versions to enable. Overrides '''–protocols '''configuration parameter.
+** Specifies which NETCONF protocol versions to enable. Overrides
+'''–protocols '''configuration parameter.
 * '''private-key'''
 ** type: string
 ** usage: optional
 ** default: --private-key configuration parameter setting
-** Specifies the SSH private key file to use. Overrides –private-key configuration parameter.
+** Specifies the SSH private key file to use. Overrides –private-key
+configuration parameter.
 * '''public-key'''
 ** type: string
 ** usage: optional
 ** default: '''--public-key''' configuration parameter setting
-** Specifies the SSH public key file to use. Overrides '''–public-key '''configuration parameter.
+** Specifies the SSH public key file to use. Overrides '''–public-key
+'''configuration parameter.
 Positive Response:
-* the session is started and the prompt changes to include the [mailto:'user@agent 'user@server]' string.
+* the session is started and the prompt changes to include the
+[mailto:'user@agent 'user@server]' string.
 Negative Response:
-* One or more error messages will be printed. Refer to the section on trouble-shooting NETCONF Session problems for more details.
+* One or more error messages will be printed. Refer to the section on
+trouble-shooting NETCONF Session problems for more details.
 Usage:
-     yangcli> '''connect [http://www.example.com/ myserver] user=andy password=yangrocks'''
+     yangcli> '''connect [http://www.example.com/ myserver] user=andy
+password=yangrocks'''
      <nowiki><startup screen printed></nowiki>
@@ Line 2,646: / Line 4,428: @@
 === copy-config ===
-The '''copy-config''' command is used to copy one entire NETCONF database to another location.
+The '''copy-config''' command is used to copy one entire NETCONF
+database to another location.
-Not all possible parameter combinations will be supported by every server. In fact, the NETCONF protocol does not require any parameters to be supported unless the ''':startup''' or ''':url''' capabilities is supported by the server.
+Not all possible parameter combinations will be supported by every
+server. In fact, the NETCONF protocol does not require any parameters to
+be supported unless the ''':startup''' or ''':url''' capabilities is
+supported by the server.
@@ Line 2,654: / Line 4,440: @@
- yangcli [mailto:andy@myagent andy@myserver]> '''copy-config source=running target=startup'''
+ yangcli [mailto:andy@myagent andy@myserver]> '''copy-config
+source=running target=startup'''
-This is the standard way to save a snapshot of the current running configuration in non-volatile storage, if the server has a separate startup database. If not, the server will automatically save any changes to the running configuration to non-volatile storage.
+This is the standard way to save a snapshot of the current running
+configuration in non-volatile storage, if the server has a separate
+startup database. If not, the server will automatically save any changes
+to the running configuration to non-volatile storage.
@@ Line 2,664: / Line 4,454: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| remote
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  remote
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 2
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 2
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 3
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 3
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| status
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| status
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yuma-netconf.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yuma-netconf.yang
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Capabilities needed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Capabilities needed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Capabilities optional:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| :candidate:startup:url:with-defaults
+#000000;border-right:none;padding:0.0403in;"| Capabilities optional:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| :candidate:startup:url:with-defaults
 |}
@@ Line 2,703: / Line 4,523: @@
 ** usage: mandatory
 ** default: none
-** This parameter specifies the name of the source database for the copy operation.
+** This parameter specifies the name of the source database for the copy
+operation.
 ** container contents: 1 of N:
 *** '''candidate'''
@@ Line 2,719: / Line 4,540: @@
 *** '''url'''
 **** type: yang:uri
-**** capabilities needed: :url, and the scheme used in the URL must be specified in the :url capability 'schemes' parameter
+**** capabilities needed: :url, and the scheme used in the URL must be
+specified in the :url capability 'schemes' parameter
-**** To enter this parameter, the interactive mode must be used. The shorthand mode (source=url) cannot be used, since this parameter contains a string.
+**** To enter this parameter, the interactive mode must be used. The
+shorthand mode (source=url) cannot be used, since this parameter
+contains a string.
 * '''target'''
 ** type: container with 1 of N choice of leafs
 ** usage: mandatory
 ** default: none
-** This parameter specifies the name of the target database for the copy operation.
+** This parameter specifies the name of the target database for the copy
+operation.
 ** container contents: 1 of N:
 *** '''candidate'''
@@ Line 2,732: / Line 4,557: @@
 *** '''running'''
 **** type: empty
-**** capabilities needed: :writable-running (still optional to implement)
+**** capabilities needed: :writable-running (still optional to
+implement)
 ***** '''netconfd''' does not support this mode
 *** '''startup'''
@@ Line 2,739: / Line 4,565: @@
 *** '''url'''
 **** type: yang:uri
-**** capabilities needed: :url, and the scheme used in the URL must be specified in the :url capability 'schemes' parameter.
+**** capabilities needed: :url, and the scheme used in the URL must be
+specified in the :url capability 'schemes' parameter.
-**** To enter this parameter, the interactive mode must be used. The shorthand mode (target=url) cannot be used, since this parameter contains a string.
+**** To enter this parameter, the interactive mode must be used. The
+shorthand mode (target=url) cannot be used, since this parameter
+contains a string.
 * '''with-defaults'''
 ** type: enumeration (none report-all report-all-tagged trim explicit)
@@ Line 2,746: / Line 4,575: @@
 ** default: none
 ** capabilities needed: with-defaults
-** This parameter controls how nodes containing only default values are copied to the target database.
+** This parameter controls how nodes containing only default values are
+copied to the target database.
 Positive Response:
@@ Line 2,755: / Line 4,585: @@
 * An error message will be printed if errors are detected locally.
-* <nowiki>An <rpc-error> message will be printed if the server detected an error.</nowiki>
+* <nowiki>An <rpc-error> message will be printed if the server detected
+an error.</nowiki>
 Usage:
@@ Line 2,778: / Line 4,609: @@
      Filling optional case /copy-config/input/target/config-source/url
      <nowiki>Enter string value for leaf <url>:</nowiki>
-     yangcli andy@myserver:copy-config> [smb://configs/myconfig.xml file://configs/myconfig.xml]
+     yangcli andy@myserver:copy-config> [smb://configs/myconfig.xml
+file://configs/myconfig.xml]
      RPC OK Reply 12 for session 10:
@@ Line 2,788: / Line 4,620: @@
 === create ===
-The '''create'''<nowiki> command is a high-level <edit-config> operation. </nowiki>It is used to create some new nodes in the default target database.
+The '''create'''<nowiki> command is a high-level <edit-config>
+operation. </nowiki>It is used to create some new nodes in the default
+target database.
-A target node is specified (in 1 of 2 ways), and then the data structure is filled in. Only mandatory nodes will be filled in unless the '''$$optional''' system variable is set to 'true'.
+A target node is specified (in 1 of 2 ways), and then the data structure
+is filled in. Only mandatory nodes will be filled in unless the
+'''$$optional''' system variable is set to 'true'.
-Refer to the '''fill''' command for more details on interactive mode data structure completion.
+Refer to the '''fill''' command for more details on interactive mode
+data structure completion.
@@ Line 2,799: / Line 4,636: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| remote
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  remote
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| target
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| target
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 5
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 5
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| status
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| status
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yangcli.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yangcli.yang
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Capabilities needed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| :candidate or :writable-running
+#000000;border-right:none;padding:0.0403in;"| Capabilities needed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| :candidate or :writable-running
 |}
@@ Line 2,834: / Line 4,697: @@
 ** usage: mandatory
 ** default: none
-** This parameter specifies the where '''yangcli''' should get the data from, for the create operation. It is either a user variable or from interactive input at the command line.
+** This parameter specifies the where '''yangcli''' should get the data
+from, for the create operation. It is either a user variable or from
+interactive input at the command line.
 *** '''varref'''
 **** type: string
 **** usage: mandatory
 **** default: none
-**** This parameter specifies the name of the user variable to use for the target of the create operation. The parameter must exist (e.g., created with the '''fill''' command) or an error message will be printed.
+**** This parameter specifies the name of the user variable to use for
+the target of the create operation. The parameter must exist (e.g.,
+created with the '''fill''' command) or an error message will be
+printed.
 *** '''case from-cli '''(not entered)
 **** '''target'''
@@ Line 2,845: / Line 4,713: @@
 ***** usage: mandatory
 ***** default: none
-***** This parameter specifies the database target node of the create operation. This is an '''ncx:schema-instance''' string, so any instance identifier, or absolute path expression, or something in between, is accepted.
+***** This parameter specifies the database target node of the create
+operation. This is an '''ncx:schema-instance''' string, so any instance
+identifier, or absolute path expression, or something in between, is
+accepted.
 **** '''urltarget'''
 ***** type: string
 ***** usage: optional
 ***** default: none
-***** This parameter specifies the database target node of the create operation. This is an '''UrlPath''' string.
+***** This parameter specifies the database target node of the create
+operation. This is an '''UrlPath''' string.
 **** '''optional'''
 ***** type: empty
 ***** usage: optional
 ***** default: controlled by '''$$optional''' system variable
-***** This parameter controls whether optional nodes within the target will be filled in. It can be used to override the '''$$optional '''system variable, when it is set to 'false'.
+***** This parameter controls whether optional nodes within the target
+will be filled in. It can be used to override the '''$$optional
+'''system variable, when it is set to 'false'.
 **** '''value'''
 ***** type: anyxml
 ***** usage: mandatory
 ***** default: none
+***** This parameter specifies the value that should be used for the
-***** This parameter specifies the value that should be used for the contents of the '''target''' parameter. If it is entered, then the interactive mode prompting for missing parameters will be skipped, if this parameter is complete (or all mandatory nodes present if the '''$$optional''' system variable is 'false'). For example, if the target is a leaf, then specifying this parameter will always cause the interactive prompt mode to be skipped.
+contents of the '''target''' parameter. If it is entered, then the
+interactive mode prompting for missing parameters will be skipped, if
+this parameter is complete (or all mandatory nodes present if the
+'''$$optional''' system variable is 'false'). For example, if the target
+is a leaf, then specifying this parameter will always cause the
+interactive prompt mode to be skipped.
 * '''timeout'''
-** type: uint32 (0 = no timeout, otherwise the number of seconds to wait)
+** type: uint32 (0 = no timeout, otherwise the number of seconds to
+wait)
 *
 ** usage: optional
-** default: set to the '''$$timeout''' system variable, default 30 seconds
+** default: set to the '''$$timeout''' system variable, default 30
+seconds
-** This parameter specifies the number of seconds to wait for a response from the server before giving up. The session will not be dropped if a remote command times out, but any late response will be dropped. A value of zero means no timeout should be used, and yangcli will wait forever for a response.
+** This parameter specifies the number of seconds to wait for a response
+from the server before giving up. The session will not be dropped if a
+remote command times out, but any late response will be dropped. A value
+of zero means no timeout should be used, and yangcli will wait forever
+for a response.
 System Variables:
 * '''$$default-operation'''
-** <nowiki>The <default-operation> parameter for the <edit-config> operation will be derived from this variable.</nowiki>
+** <nowiki>The <default-operation> parameter for the <edit-config>
+operation will be derived from this variable.</nowiki>
 * '''$$error-option'''
-** <nowiki>The <error-option> parameter for the <edit-config> operation will be derived from this variable</nowiki>
+** <nowiki>The <error-option> parameter for the <edit-config> operation
+will be derived from this variable</nowiki>
 * '''$$test-option'''
-** <nowiki>The <test-option> parameter for the <edit-config> operation will be derived from this variable</nowiki>
+** <nowiki>The <test-option> parameter for the <edit-config> operation
+will be derived from this variable</nowiki>
 Positive Response:
@@ Line 2,886: / Line 4,775: @@
 * An error message will be printed if errors are detected locally.
-* <nowiki>An <rpc-error> message will be printed if the server detected an error.</nowiki>
+* <nowiki>An <rpc-error> message will be printed if the server detected
+an error.</nowiki>
 Usage:
@@ Line 2,895: / Line 4,785: @@
      RPC OK Reply 10 for session 10:
-     yangcli [mailto:andy@www.example.com andy@myserver]> '''create /nacm/rules/data-rule''' \
+     yangcli [mailto:andy@www.example.com andy@myserver]> '''create
+/nacm/rules/data-rule''' \
      (user will be prompted to fill in the data-rule contents)
@@ Line 2,901: / Line 4,792: @@
      yangcli [mailto:andy@www.example.com andy@myserver]> '''create \'''
-         '''<nowiki>target=/nacm/rules/data-rule[name='test rule']/comment</nowiki>''' \
+         '''<nowiki>target=/nacm/rules/data-rule[name='test
+rule']/comment</nowiki>''' \
          '''value=”this test rule is temporary. Do not remove!”'''
-     <nowiki>(no user prompting; <edit-config> request sent right away)</nowiki>
+     <nowiki>(no user prompting; <edit-config> request sent right
+away)</nowiki>
      RPC OK Reply 12 for session 10:
@@ Line 2,914: / Line 4,807: @@
 === create-subscription ===
-The create-subscription command is used to start receiving notifications from the server.
+The create-subscription command is used to start receiving notifications
+from the server.
-The :notification capability must be supported by the server to use this command.
+The :notification capability must be supported by the server to use this
+command.
-Unless the :interleave capability is also supported by the server, then only the '''close-session''' command can be used while notifications are being delivered.
+Unless the :interleave capability is also supported by the server, then
+only the '''close-session''' command can be used while notifications are
+being delivered.
@@ Line 2,925: / Line 4,822: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| remote
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  remote
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 4
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 4
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| status
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| status
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| notifications.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| notifications.yang
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Capabilities needed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| :notification
+#000000;border-right:none;padding:0.0403in;"| Capabilities needed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| :notification
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Capabilities optional:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| :interleave
+#000000;border-right:none;padding:0.0403in;"| Capabilities optional:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| :interleave
 |}
@@ Line 2,964: / Line 4,891: @@
 ** usage: optional
 ** default: 'NETCONF'
-** This parameter specifies the name of the notification stream for this subscription request. Only the 'NETCONF' stream is mandatory to implement. Any other stream contains vendor-specific content, and may not be fully supported, depending on the stream encoding.
+** This parameter specifies the name of the notification stream for this
+subscription request. Only the 'NETCONF' stream is mandatory to
+implement. Any other stream contains vendor-specific content, and may
+not be fully supported, depending on the stream encoding.
 * '''filter'''
-** <nowiki>type: anyxml (same as the <get> or <get-config> filter parameter)</nowiki>
+** <nowiki>type: anyxml (same as the <get> or <get-config> filter
+parameter)</nowiki>
 ** usage: optional
 ** default: none
-** This parameter specifies a boolean filter that should be applied to the stream. <nowiki>This is the same format as the standard <filter> element in RFC 4741, except that instead of creating a subset of the database for an <rpc-reply> PDU, the filter is used as a boolean test to send or drop each notification delivered from the server.</nowiki>
+** This parameter specifies a boolean filter that should be applied to
+the stream. <nowiki>This is the same format as the standard <filter>
-*** If any nodes are left in the 'test response', the server will send the entire notification.
+element in RFC 4741, except that instead of creating a subset of the
-*** If the result is empty after the filter is applied to the “test response”, then the server will not send the notification at all.
+database for an <rpc-reply> PDU, the filter is used as a boolean test to
-*** It is possible that access control will either cause the a notification to be dropped entirely, or may be pruned and still delivered. The standard is not clear on this topic. The '''netconfd'''<nowiki> server will prune any unauthorized payload from an eventType, but if the <eventType> itself is unauthorized, the entire notification will be dropped.</nowiki>
+send or drop each notification delivered from the server.</nowiki>
+*** If any nodes are left in the 'test response', the server will send
+the entire notification.
+*** If the result is empty after the filter is applied to the “test
+response”, then the server will not send the notification at all.
+*** It is possible that access control will either cause the a
+notification to be dropped entirely, or may be pruned and still
+delivered. The standard is not clear on this topic. The
+'''netconfd'''<nowiki> server will prune any unauthorized payload from
+an eventType, but if the <eventType> itself is unauthorized, the entire
+notification will be dropped.</nowiki>
 * '''startTime'''
 ** type: yang:date-and-time
 ** usage: optional
 ** default: none
-** This parameter causes any matching replay notifications to be delivered by the server, if notification replay is supported by the server. <nowiki>A notification will match if its <eventTime> value is greater or equal to the value of this parameter.</nowiki>
+** This parameter causes any matching replay notifications to be
+delivered by the server, if notification replay is supported by the
-** <nowiki>After all the replay notifications are delivered, the server will send a <replayComplete> eventType, indicating there are no more replay notifications that match the subscription request.</nowiki>
+server. <nowiki>A notification will match if its <eventTime> value is
+greater or equal to the value of this parameter.</nowiki>
+** <nowiki>After all the replay notifications are delivered, the server
+will send a <replayComplete> eventType, indicating there are no more
+replay notifications that match the subscription request.</nowiki>
 * '''stopTime'''
 ** type: yang:date-and-time
 ** usage: optional (not allowed unless startTime is also present)
 ** default: none
-** This parameter causes any matching replay notifications to be delivered by the server, if notification replay is supported by the server. <nowiki>A notification will match if its <eventTime> value is less than the value of this parameter. </nowiki>
+** This parameter causes any matching replay notifications to be
+delivered by the server, if notification replay is supported by the
-*** This parameter must be greater than the '''startTime''' parameter, or an error will be returned by the server.
+server. <nowiki>A notification will match if its <eventTime> value is
-*** If this parameter is used, then the entire subscription will stop after this specified time, even if it is in the future. <nowiki>The <notificationComplete> eventType will be sent by the server when this event occurs.</nowiki>
+less than the value of this parameter. </nowiki>
-*** If this parameter is not used (but '''startTime'''<nowiki> is used), then the server will continue to deliver 'live' notifications after the <replayComplete> eventType is sent by the server.</nowiki>
+*** This parameter must be greater than the '''startTime''' parameter,
+or an error will be returned by the server.
+*** If this parameter is used, then the entire subscription will stop
+after this specified time, even if it is in the future. <nowiki>The
+<notificationComplete> eventType will be sent by the server when this
+event occurs.</nowiki>
+*** If this parameter is not used (but '''startTime'''<nowiki> is used),
+then the server will continue to deliver 'live' notifications after the
+<replayComplete> eventType is sent by the server.</nowiki>
 Positive Response:
@@ Line 2,995: / Line 4,951: @@
 * An error message will be printed if errors are detected locally.
-* <nowiki>An <rpc-error> message will be printed if the server detected an error.</nowiki>
+* <nowiki>An <rpc-error> message will be printed if the server detected
+an error.</nowiki>
 Usage:
@@ Line 3,004: / Line 4,961: @@
      RPC OK Reply 13 for session 10:
-     yangcli [mailto:andy@www.example.com andy@myserver]> '''create-subscription \'''
+     yangcli [mailto:andy@www.example.com andy@myserver]>
+'''create-subscription \'''
          '''startTime=2009-01-01T00:00:00Z'''
@@ Line 3,017: / Line 4,975: @@
 === delete ===
-The '''delete'''<nowiki> command is a high-level <edit-config> operation. </nowiki>It is used to delete an existing subtree in the default target database.
+The '''delete'''<nowiki> command is a high-level <edit-config>
+operation. </nowiki>It is used to delete an existing subtree in the
+default target database.
-A target node is specified, and then any missing key leafs (if any) within the data structure are filled in. If the target is a leaf-list, then the user will be prompted for the value of the leaf-list node to be deleted.
+A target node is specified, and then any missing key leafs (if any)
+within the data structure are filled in. If the target is a leaf-list,
+then the user will be prompted for the value of the leaf-list node to be
+deleted.
-Refer to the '''fill''' command for more details on interactive mode data structure completion.
+Refer to the '''fill''' command for more details on interactive mode
+data structure completion.
@@ Line 3,028: / Line 4,992: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| remote
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  remote
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| target
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| target
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| status
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| status
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yangcli.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yangcli.yang
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Capabilities needed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| :candidate or :writable-running
+#000000;border-right:none;padding:0.0403in;"| Capabilities needed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| :candidate or :writable-running
 |}
@@ Line 3,063: / Line 5,053: @@
 ** usage: optional (urltarget or target must be present)
 ** default: none
-** This parameter specifies the database target node of the delete operation. This is an '''ncx:schema-instance''' string, so any instance identifier, or absolute path expression, or something in between, is accepted.
+** This parameter specifies the database target node of the delete
+operation. This is an '''ncx:schema-instance''' string, so any instance
+identifier, or absolute path expression, or something in between, is
+accepted.
 * '''urltarget'''
 **
@@ Line 3,071: / Line 5,064: @@
 ***** usage: optional
 ***** default: none
-***** This parameter specifies the database target node of the delete operation. This is an '''UrlPath''' string.
+***** This parameter specifies the database target node of the delete
+operation. This is an '''UrlPath''' string.
 System Variables:
 * '''$$default-operation'''
-** <nowiki>The <default-operation> parameter for the <edit-config> operation will be derived from this variable.</nowiki>
+** <nowiki>The <default-operation> parameter for the <edit-config>
+operation will be derived from this variable.</nowiki>
 * '''$$error-option'''
-** <nowiki>The <error-option> parameter for the <edit-config> operation will be derived from this variable</nowiki>
+** <nowiki>The <error-option> parameter for the <edit-config> operation
+will be derived from this variable</nowiki>
 * '''$$optional'''
-** Controls whether optional descendant nodes will be filled into the '''target''' parameter contents
+** Controls whether optional descendant nodes will be filled into the
+'''target''' parameter contents
 * '''$$test-option'''
-** <nowiki>The <test-option> parameter for the <edit-config> operation will be derived from this variable</nowiki>
+** <nowiki>The <test-option> parameter for the <edit-config> operation
+will be derived from this variable</nowiki>
 Positive Response:
@@ Line 3,092: / Line 5,090: @@
 * An error message will be printed if errors are detected locally.
-* <nowiki>An <rpc-error> message will be printed if the server detected an error.</nowiki>
+* <nowiki>An <rpc-error> message will be printed if the server detected
+an error.</nowiki>
 Usage:
-     yangcli [mailto:andy@www.example.com andy@myserver]> delete''' /nacm/rules/data-rule''' \
+     yangcli [mailto:andy@www.example.com andy@myserver]> delete'''
+/nacm/rules/data-rule''' \
      (user will be prompted to fill in the data-rule 'name' key leaf)
@@ Line 3,103: / Line 5,103: @@
      yangcli [mailto:andy@www.example.com andy@myserver]> delete''' \'''
-         '''<nowiki>target=/nacm/rules/data-rule[name='test rule']/comment</nowiki>'''
+         '''<nowiki>target=/nacm/rules/data-rule[name='test
+rule']/comment</nowiki>'''
-     <nowiki>(no user prompting; <edit-config> request sent right away)</nowiki>
+     <nowiki>(no user prompting; <edit-config> request sent right
+away)</nowiki>
      RPC OK Reply 16 for session 10:
@@ Line 3,115: / Line 5,117: @@
 === delete-config ===
-The '''delete-config''' command is used to delete an entire NETCONF database.
+The '''delete-config''' command is used to delete an entire NETCONF
+database.
-Not all possible '''target''' parameter values will be supported by every server. In fact, the NETCONF protocol does not require that any database be supported by this operation.
+Not all possible '''target''' parameter values will be supported by
+every server. In fact, the NETCONF protocol does not require that any
+database be supported by this operation.
-If the server supports the :url capability, then it may support deletion of local file databases in this manner.:
+If the server supports the :url capability, then it may support deletion
+of local file databases in this manner.:
@@ Line 3,126: / Line 5,132: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| remote
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  remote
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| status
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| status
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yuma-netconf.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yuma-netconf.yang
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Capabilities needed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Capabilities needed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Capabilities optional:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| :candidate:startup:url
+#000000;border-right:none;padding:0.0403in;"| Capabilities optional:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| :candidate:startup:url
 |}
@@ Line 3,165: / Line 5,201: @@
 ** usage: mandatory
 ** default: none
-** This parameter specifies the name of the target database for the delete operation.
+** This parameter specifies the name of the target database for the
+delete operation.
 ** container contents: 1 of N:
 *** '''startup'''
@@ Line 3,173: / Line 5,210: @@
 *** '''url'''
 **** type: yang:uri
-**** capabilities needed: :url, and the scheme used in the URL must be specified in the :url capability 'schemes' parameter.
+**** capabilities needed: :url, and the scheme used in the URL must be
+specified in the :url capability 'schemes' parameter.
-**** To enter this parameter, the interactive mode must be used. The shorthand mode (target=url) cannot be used, since this parameter contains a string.
+**** To enter this parameter, the interactive mode must be used. The
+shorthand mode (target=url) cannot be used, since this parameter
+contains a string.
 **** a server may support this parameter
@@ Line 3,184: / Line 5,224: @@
 * An error message will be printed if errors are detected locally.
-* <nowiki>An <rpc-error> message will be printed if the server detected an error.</nowiki>
+* <nowiki>An <rpc-error> message will be printed if the server detected
+an error.</nowiki>
 Usage:
@@ Line 3,201: / Line 5,242: @@
 === discard-changes ===
+The '''discard-changes'''<nowiki> command is used to delete any edits
-The '''discard-changes'''<nowiki> command is used to delete any edits that exist in the <candidate> database, on the NETCONF server. </nowiki>The server will only accept this command if the :candidate capability is supported. <nowiki>If the <candidate> database is locked by another session, then this request will fail with an 'in-use' error.</nowiki>
+that exist in the <candidate> database, on the NETCONF server.
+</nowiki>The server will only accept this command if the :candidate
+capability is supported. <nowiki>If the <candidate> database is locked
+by another session, then this request will fail with an 'in-use'
+error.</nowiki>
@@ Line 3,208: / Line 5,254: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| remote
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  remote
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| status
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| status
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yuma-netconf.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yuma-netconf.yang
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Capabilities needed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| :candidate
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Capabilities needed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| :candidate
 |}
@@ Line 3,246: / Line 5,318: @@
 * An error message will be printed if errors are detected locally.
-* <nowiki>An <rpc-error> message will be printed if the server detected an error.</nowiki>
+* <nowiki>An <rpc-error> message will be printed if the server detected
+an error.</nowiki>
 Usage:
@@ Line 3,263: / Line 5,336: @@
 === edit-config ===
-The edit-config command allows a subset of a NETCONF database on the server to be changed.
+The edit-config command allows a subset of a NETCONF database on the
+server to be changed.
-If the server supports the ''':url''' capability, then it may support editing of local file databases.
+If the server supports the ''':url''' capability, then it may support
+editing of local file databases.
-<nowiki>If the server supports the :candidate capability, then it will allow edits to the <candidate> database.</nowiki>
+<nowiki>If the server supports the :candidate capability, then it will
+allow edits to the <candidate> database.</nowiki>
-<nowiki>If the server supports the :writable-running capability, it will support edits to the <running> database.</nowiki>
+<nowiki>If the server supports the :writable-running capability, it will
+support edits to the <running> database.</nowiki>
-<nowiki>It is not likely that a server will support the <candidate> and <running> database as targets at the same time, since changes to the <running> configuration would not be reflected in the <candidate> database, while it was being edited by a different session.</nowiki>
+<nowiki>It is not likely that a server will support the <candidate> and
+<running> database as targets at the same time, since changes to the
+<running> configuration would not be reflected in the <candidate>
+database, while it was being edited by a different session.</nowiki>
@@ Line 3,278: / Line 5,358: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| remote
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  remote
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 2
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 2
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 5
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 5
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| status
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| status
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yuma-netconf.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yuma-netconf.yang
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Capabilities needed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| :candidate or :writable-running
+#000000;border-right:none;padding:0.0403in;"| Capabilities needed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| :candidate or :writable-running
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Capabilities optional:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| :url:rollback-on-error:validate
+#000000;border-right:none;padding:0.0403in;"| Capabilities optional:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| :url:rollback-on-error:validate
 |}
@@ Line 3,317: / Line 5,427: @@
 ** usage: optional
 ** default: merge
-** This parameter specifies which edit operation will be in effect at the start of the operation, before any '''nc:operation '''attribute is found.
+** This parameter specifies which edit operation will be in effect at
+the start of the operation, before any '''nc:operation '''attribute is
-*** The high-level edit operations provided by '''yangcli''' will set this parameter to 'none'. This is the safest value, since only subtrees that have an explicit '''nc:operation''' attribute in effect can possibly be altered by the command.
+found.
-*** If the value is 'merge', then any missing nodes in the database will be automatically created as needed.
+*** The high-level edit operations provided by '''yangcli''' will set
-*** If the value is 'replace', then the target database will be pruned to match the edits, as needed. Only the data from the '''config''' parameter will remain if this value is used. (Use with extreme caution).
+this parameter to 'none'. This is the safest value, since only subtrees
+that have an explicit '''nc:operation''' attribute in effect can
+possibly be altered by the command.
+*** If the value is 'merge', then any missing nodes in the database will
+be automatically created as needed.
+*** If the value is 'replace', then the target database will be pruned
+to match the edits, as needed. Only the data from the '''config'''
+parameter will remain if this value is used. (Use with extreme caution).
 * '''error-option'''
 ** type: enumeration (stop-on-error continue-on-error rollback-on-error
 ** usage: optional
 ** default: stop-on-error
-** This parameter specifies what the server should do when an error is encountered.
+** This parameter specifies what the server should do when an error is
+encountered.
-*** The rollback-on-error value is only allowed if the ''':rollback-on-error''' capability is supported by the server.
+*** The rollback-on-error value is only allowed if the
-*** The standard is not clear what continue-on-error really means. It is suggested that this value not be used. It is possible that the server will validate all input parameters before making any changes, no matter how this parameter is set.
+''':rollback-on-error''' capability is supported by the server.
+*** The standard is not clear what continue-on-error really means. It is
+suggested that this value not be used. It is possible that the server
+will validate all input parameters before making any changes, no matter
+how this parameter is set.
 * '''choice edit-content''' (not entered)
 ** '''config'''
@@ Line 3,333: / Line 5,456: @@
 *** usage: mandatory
 *** default: none
-*** This parameter specifies the subset of the database that should be changed. This is the most common way to edit a NETCONF server database, since it is mandatory to support by all agents.
+*** This parameter specifies the subset of the database that should be
+changed. This is the most common way to edit a NETCONF server database,
+since it is mandatory to support by all agents.
 ** '''url'''
 *** type: yang:uri
-*** capabilities needed:''' :url,''' and the scheme used in the URL must be specified in the ''':url''' capability 'schemes' parameter.
+*** capabilities needed:''' :url,''' and the scheme used in the URL must
+be specified in the ''':url''' capability 'schemes' parameter.
-*** To enter this parameter, the interactive mode must be used. The shorthand mode (target=url) cannot be used, since this parameter contains a string.
+*** To enter this parameter, the interactive mode must be used. The
+shorthand mode (target=url) cannot be used, since this parameter
+contains a string.
 * '''target'''
 ** type: container with 1 of N choice of leafs
 ** usage: mandatory
 ** default: none
-** This parameter specifies the name of the target database for the edit operation.
+** This parameter specifies the name of the target database for the edit
+operation.
 ** container contents: choice: 1 of N:
 *** '''candidate'''
@@ Line 3,354: / Line 5,483: @@
 ** usage: optional
 ** default: set
-** This parameter specifies how the server should test the '''edit-content''' parameter before using it.
+** This parameter specifies how the server should test the
+'''edit-content''' parameter before using it.
-*** If the value is 'set' (normal case), the server will apply validation tests as needed for the individual data structures being edited
+*** If the value is 'set' (normal case), the server will apply
-*** The value 'test-then-set' is only allowed if the :validate capability is supported by the server. The server will test if the entire database will be valid after the edits are made, before making any changes to the candidate configuration.
+validation tests as needed for the individual data structures being
-**** This mode is very resource intensive. Set this parameter to 'set' for better performance, and run the validation tests manually with the '''validate''' command.
+edited
-*** The value 'test-only' is not supported by all agents. It will be in the next version of the NETCONF protocol, but is non-standard at this time.
+*** The value 'test-then-set' is only allowed if the :validate
-**** Use this value to check if a specific edit should succeed or not, allowing errors to be corrected before altering the database for real.
+capability is supported by the server. The server will test if the
+entire database will be valid after the edits are made, before making
+any changes to the candidate configuration.
+**** This mode is very resource intensive. Set this parameter to 'set'
+for better performance, and run the validation tests manually with the
+'''validate''' command.
+*** The value 'test-only' is not supported by all agents. It will be in
+the next version of the NETCONF protocol, but is non-standard at this
+time.
+**** Use this value to check if a specific edit should succeed or not,
+allowing errors to be corrected before altering the database for real.
 Positive Response:
@@ Line 3,368: / Line 5,508: @@
 * An error message will be printed if errors are detected locally.
-* <nowiki>An <rpc-error> message will be printed if the server detected an error.</nowiki>
+* <nowiki>An <rpc-error> message will be printed if the server detected
+an error.</nowiki>
 Usage:
@@ Line 3,389: / Line 5,530: @@
 === elif ===
-The '''elif''' command is used to define a conditional command block after an if command.
+The '''elif''' command is used to define a conditional command block
+after an if command.
-This command must be entered within the same script as the if command, when used within a script. It can be used zero or more times within an if command sequence.
+This command must be entered within the same script as the if command,
+when used within a script. It can be used zero or more times within an
+if command sequence.
+The '''expr''' parameter is used to specify the XPath expression to test
-The '''expr''' parameter is used to specify the XPath expression to test if the elif conditional block is true or false. A false block will be skipped and a true block will be executed. <nowiki>The command prompt will contain the string '[F]' while inside a false conditional block in interactive mode. </nowiki>This expression string should be entered with quotes to avoid misinterpreting any whitespace or special characters.
+if the elif conditional block is true or false. A false block will be
+skipped and a true block will be executed. <nowiki>The command prompt
+will contain the string '[F]' while inside a false conditional block in
+interactive mode. </nowiki>This expression string should be entered with
+quotes to avoid misinterpreting any whitespace or special characters.
-The '''docroot''' parameter (if present) specifies the XML document that the 'expr' parameter should be evaluated against. This is optional, since only XPath path expressions need to refer to a document.
+The '''docroot''' parameter (if present) specifies the XML document that
+the 'expr' parameter should be evaluated against. This is optional,
+since only XPath path expressions need to refer to a document.
-Even if the 'expr' expression is true, the conditional block will only be executed if no conditional block in the if command sequence has already been executed.
+Even if the 'expr' expression is true, the conditional block will only
+be executed if no conditional block in the if command sequence has
+already been executed.
@@ Line 3,423: / Line 5,576: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| local
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  local
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| expr
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| expr
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 2
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 2
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| status
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| status
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yangcli.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yangcli.yang
 |}
@@ Line 3,454: / Line 5,629: @@
 ** usage: mandatory
 ** default: none
-** This parameter specifies the XPath expression to determine if the following commands are within a true or false conditional block.
+** This parameter specifies the XPath expression to determine if the
+following commands are within a true or false conditional block.
 * '''docroot'''
 ** type: anyxml
 ** usage: optional (typically a variable reference is used)
 ** default: none
-** This parameter specifies the XML document that should be used if the expr XPath expression references any path nodes.
+** This parameter specifies the XML document that should be used if the
+expr XPath expression references any path nodes.
 Positive Response:
@@ Line 3,470: / Line 5,647: @@
 ** elif without a previous if command will cause an error
 ** elif following an 'else' command will cause an error
-** invalid XPath expression or invalid docroot reference will cause an error
+** invalid XPath expression or invalid docroot reference will cause an
+error
 Usage:
@@ Line 3,481: / Line 5,659: @@
 === else ===
-The '''else''' command is used to define a final conditional command block after an if command.
+The '''else''' command is used to define a final conditional command
+block after an if command.
-This command must be entered within the same script as the if command, when used within a script. It can be used zero or one time within an if command sequence.
+This command must be entered within the same script as the if command,
+when used within a script. It can be used zero or one time within an if
+command sequence.
-The conditional command block following the else command will only be executed if no conditional block has already been executed in the same if command sequence.
+The conditional command block following the else command will only be
+executed if no conditional block has already been executed in the same
+if command sequence.
@@ Line 3,511: / Line 5,694: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| local
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  local
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| status
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| status
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yangcli.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yangcli.yang
 |}
@@ Line 3,556: / Line 5,761: @@
 === end ===
-The '''end''' command is used to terminate a conditional command block after an if command block, or after a 'while' command.
+The '''end''' command is used to terminate a conditional command block
+after an if command block, or after a 'while' command.
-This command must be entered within the same script as the if or while command, when used within a script.
+This command must be entered within the same script as the if or while
+command, when used within a script.
@@ Line 3,591: / Line 5,798: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| local
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  local
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| status
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| status
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yangcli.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yangcli.yang
 |}
@@ Line 3,637: / Line 5,866: @@
 The '''eval''' command is used to evaluate an XPath expression..
-The '''expr''' parameter is used to specify the XPath expression to evaluate. This expression string should be entered with quotes to avoid misinterpreting any whitespace or special characters.
+The '''expr''' parameter is used to specify the XPath expression to
+evaluate. This expression string should be entered with quotes to avoid
+misinterpreting any whitespace or special characters.
-The '''docroot''' parameter (if present) specifies the XML document that the 'expr' parameter should be evaluated against. This is optional, since only XPath path expressions need to refer to a document.
+The '''docroot''' parameter (if present) specifies the XML document that
+the 'expr' parameter should be evaluated against. This is optional,
+since only XPath path expressions need to refer to a document.
@@ Line 3,646: / Line 5,879: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| local
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  local
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| expr
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| expr
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 2
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 2
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| data
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| data
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yangcli.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yangcli.yang
 |}
@@ Line 3,677: / Line 5,932: @@
 ** usage: mandatory
 ** default: none
-** This parameter specifies the XPath expression to determine if the following commands are within a true or false conditional block.
+** This parameter specifies the XPath expression to determine if the
+following commands are within a true or false conditional block.
 * '''docroot'''
 ** type: anyxml
 ** usage: optional (typically a variable reference is used)
 ** default: none
-** This parameter specifies the XML document that should be used if the expr XPath expression references any path nodes.
+** This parameter specifies the XML document that should be used if the
+expr XPath expression references any path nodes.
 Positive Response:
@@ Line 3,693: / Line 5,950: @@
 ** elif without a previous if command will cause an error
 ** elif following an 'else' command will cause an error
-** invalid XPath expression or invalid docroot reference will cause an error
+** invalid XPath expression or invalid docroot reference will cause an
+error
 Output:
@@ Line 3,699: / Line 5,957: @@
 * '''data'''
 ** type: anyxml
-** This element will contain the result from the XPath expression. A node-set result will produce a complex element return value, and all other XPath result types will produce a string return value.
+** This element will contain the result from the XPath expression. A
+node-set result will produce a complex element return value, and all
+other XPath result types will produce a string return value.
 Usage:
@@ Line 3,705: / Line 5,965: @@
      yangcli andy@myserver> '''$x = eval '$x + 1''''
-     yangcli [mailto:andy@myagent andy@myserver]> '''$sysname = eval '//sysName' docroot=$backup'''
+     yangcli [mailto:andy@myagent andy@myserver]> '''$sysname = eval
+'//sysName' docroot=$backup'''
 === eventlog ===
-The '''eventlog''' command is used to view or clear all or part of the notification event log. This log will be empty if no well-formed notifications have been received from any server.
+The '''eventlog''' command is used to view or clear all or part of the
+notification event log. This log will be empty if no well-formed
+notifications have been received from any server.
-The '''eventlog show''' command is used to display some event log entries.
+The '''eventlog show''' command is used to display some event log
+entries.
-The''' eventlog clear''' command is used to delete some event log entries.
+The''' eventlog clear''' command is used to delete some event log
+entries.
-If no parameters are entered, it is the same as entering 'eventlog show=-1'.
+If no parameters are entered, it is the same as entering 'eventlog
+show=-1'.
-The event log is not automatically emptied when a session terminates, in case the session was dropped unexpectedly. New entries will be appended to the event log as new sessions and/or subscriptions are started.
+The event log is not automatically emptied when a session terminates, in
+case the session was dropped unexpectedly. New entries will be appended
+to the event log as new sessions and/or subscriptions are started.
@@ Line 3,724: / Line 5,992: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| local
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  local
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| show
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| show
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 3
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 3
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| status
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| status
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yangcli.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yangcli.yang
 |}
@@ Line 3,755: / Line 6,045: @@
 ** usage: optional
 ** default: show=-1 is used as the default if nothing entered
-** This parameter specifies the event log action that should be performed.
+** This parameter specifies the event log action that should be
+performed.
 *** '''clear'''
 **** type: int32 (-1 to clear all entries; 1 to max to delete N entries)
 **** usage: optional
 **** default: -1
-**** This parameter specifies the maximum number of event log entries to be deleted, starting from the oldest entries in the event log. The value -1 means delete all the entries. Otherwise the value must be greater than zero, and up to that many entries will be deleted.
+**** This parameter specifies the maximum number of event log entries to
+be deleted, starting from the oldest entries in the event log. The value
+-1 means delete all the entries. Otherwise the value must be greater
+than zero, and up to that many entries will be deleted.
 *** '''case show-case''' (not entered)
 **** '''choice help-mode''' (not entered) (default choice is 'normal')
@@ Line 3,767: / Line 6,061: @@
 ****** usage: optional
 ****** default: none
-****** This parameter specifies that brief documentation mode should be used. <nowiki>The event log index, sequence ID, and <eventType> will be displayed in this mode.</nowiki>
+****** This parameter specifies that brief documentation mode should be
+used. <nowiki>The event log index, sequence ID, and <eventType> will be
+displayed in this mode.</nowiki>
 ***** '''normal'''
 ****** type: empty
 ****** usage: optional
 ****** default: none
-****** This parameter specifies that normal documentation mode should be used. <nowiki>The event log index, <eventTime>, sequence ID, and <eventType> will be displayed in this mode.</nowiki>
+****** This parameter specifies that normal documentation mode should be
+used. <nowiki>The event log index, <eventTime>, sequence ID, and
+<eventType> will be displayed in this mode.</nowiki>
 ***** '''full'''
 ****** type: empty
 ****** usage: optional
 ****** default: none
-****** This parameter specifies that full documentation mode should be used. <nowiki>The event log index, <eventTime>, sequence ID, and <eventType> will be displayed in this mode. </nowiki>In addition, the entire contents of the notification PDU will be displayed, using the current '''$$display-mode''' setting.
+****** This parameter specifies that full documentation mode should be
+used. <nowiki>The event log index, <eventTime>, sequence ID, and
+<eventType> will be displayed in this mode. </nowiki>In addition, the
+entire contents of the notification PDU will be displayed, using the
+current '''$$display-mode''' setting.
 **** '''show'''
 ***** type: int32 (-1 for all, 1 to max for N entries)
 ***** usage: optional
 ***** default: -1
-***** This parameter specifies the number of event log entries that should be displayed. The value '-1' indicates all the entries should be displayed. Otherwise, the value must be greater than zero, indicating the number of entries to display.
+***** This parameter specifies the number of event log entries that
+should be displayed. The value '-1' indicates all the entries should be
+displayed. Otherwise, the value must be greater than zero, indicating
+the number of entries to display.
 **** '''start'''
 ***** type: uint32
 ***** usage: optional
 ***** default: 0
-***** This parameter specifies the start position in the event log to start displaying entries. The first entry is number zero. Each time the event log is cleared, the numbering restarts.
+***** This parameter specifies the start position in the event log to
+start displaying entries. The first entry is number zero. Each time the
+event log is cleared, the numbering restarts.
 System Variables:
 * $$display-mode
-** The log entries printed when help-mode='full' are formatted according to the current value of this system variable.
+** The log entries printed when help-mode='full' are formatted according
+to the current value of this system variable.
 Positive Response:
@@ Line 3,807: / Line 6,115: @@
      yangcli andy@myserver> '''eventlog show=5 start=3'''
-     <nowiki> [3]</nowiki>    <nowiki> [2009-07-10T02:21:10Z] (4)</nowiki>    <nowiki><sysSessionStart> </nowiki>
+     <nowiki> [3]</nowiki>    <nowiki> [2009-07-10T02:21:10Z]
-     <nowiki> [4]</nowiki>    <nowiki> [2009-07-10T02:23:14Z] (5)</nowiki>    <nowiki><sysSessionEnd> </nowiki>
+(4)</nowiki>    <nowiki><sysSessionStart> </nowiki>
-     <nowiki> [5]</nowiki>    <nowiki> [2009-07-10T02:23:23Z] (6)</nowiki>    <nowiki><sysSessionStart> </nowiki>
+     <nowiki> [4]</nowiki>    <nowiki> [2009-07-10T02:23:14Z]
-     <nowiki> [6]</nowiki>    <nowiki> [2009-07-10T02:24:52Z] (7)</nowiki>    <nowiki><sysConfigChange> </nowiki>
+(5)</nowiki>    <nowiki><sysSessionEnd> </nowiki>
-     <nowiki> [7]</nowiki>    <nowiki> [2009-07-10T02:24:57Z] (8)</nowiki>    <nowiki><sysSessionEnd> </nowiki>
+     <nowiki> [5]</nowiki>    <nowiki> [2009-07-10T02:23:23Z]
+(6)</nowiki>    <nowiki><sysSessionStart> </nowiki>
+     <nowiki> [6]</nowiki>    <nowiki> [2009-07-10T02:24:52Z]
+(7)</nowiki>    <nowiki><sysConfigChange> </nowiki>
+     <nowiki> [7]</nowiki>    <nowiki> [2009-07-10T02:24:57Z]
+(8)</nowiki>    <nowiki><sysSessionEnd> </nowiki>
      yangcli andy@myserver>
 === fill ===
-The '''fill''' command is used to create a user variable for reuse in other commands.
+The '''fill''' command is used to create a user variable for reuse in
+other commands.
-It is used in an assignment statement to create a variable from various sources.
+It is used in an assignment statement to create a variable from various
+sources.
-If it is not used in an assignment statement, then the result will not be saved, so the command will have no effect in this case.
+If it is not used in an assignment statement, then the result will not
+be saved, so the command will have no effect in this case.
-The value contents will mirror the subtree within the NETCONF database indicated by the target parameter. If not completely provided, then missing descendant nodes will be filled in interactively, by prompting for each missing node.
+The value contents will mirror the subtree within the NETCONF database
+indicated by the target parameter. If not completely provided, then
+missing descendant nodes will be filled in interactively, by prompting
+for each missing node.
@@ Line 3,829: / Line 6,148: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| local
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  local
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| target
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| target
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 2
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 2
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 3
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 3
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| data
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| data
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yangcli.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yangcli.yang
 |}
@@ Line 3,860: / Line 6,201: @@
 ** usage: optional
 ** default: controlled by '''$$optional''' system variable
-** This parameter controls whether optional nodes within the target will be filled in. It can be used to override the''' $$optional''' system variable, when it is set to 'false'.
+** This parameter controls whether optional nodes within the target will
+be filled in. It can be used to override the''' $$optional''' system
+variable, when it is set to 'false'.
 * '''target'''
 ** type: string
 ** usage: mandatory
 ** default: none
-** This parameter specifies the database target node of the create operation. This is an '''ncx:schema-instance '''string, so any instance identifier, or absolute path expression, or something in between, is accepted.
+** This parameter specifies the database target node of the create
+operation. This is an '''ncx:schema-instance '''string, so any instance
+identifier, or absolute path expression, or something in between, is
+accepted.
 * '''value'''
 ** type: anyxml
@@ Line 3,871: / Line 6,217: @@
 ** default: none
 ** This parameter specifies the content to use for the filled variable.
-*** If this parameter is not entered, then the user will be prompted interactively to fill in the '''target''' data structure.
+*** If this parameter is not entered, then the user will be prompted
+interactively to fill in the '''target''' data structure.
-*** If a string is entered, then the target value being filled must be a leaf or leaf-list.
-*** If a variable reference is entered, then it will be used as the content, if the target value being filled is a leaf or a leaf-list.
+*** If a string is entered, then the target value being filled must be a
+leaf or leaf-list.
-*** If the target value is a complex object, then the referenced variable must also be a complex object of the same type.
+*** If a variable reference is entered, then it will be used as the
-*** An error will be reported if the global or local variable does not reference the same object type as the target parameter.
+content, if the target value being filled is a leaf or a leaf-list.
+*** If the target value is a complex object, then the referenced
+variable must also be a complex object of the same type.
+*** An error will be reported if the global or local variable does not
+reference the same object type as the target parameter.
 System Variables:
 * $$optional
-** Controls whether optional descendant nodes will be filled into the '''target''' parameter contents
+** Controls whether optional descendant nodes will be filled into the
+'''target''' parameter contents
 Positive Response:
@@ Line 3,895: / Line 6,247: @@
 ** type: anyxml
 ** The data structure will mirror the requested target object.
-** The variable (if any) will retain the target object name and namespace so it can be used in other operations more easily. In the example below, the '''$my_interface''' local variable will have the module name 'interfaces' and name 'interface', when used in other commands such as '''create''' or '''merge'''.
+** The variable (if any) will retain the target object name and
+namespace so it can be used in other operations more easily. In the
+example below, the '''$my_interface''' local variable will have the
+module name 'interfaces' and name 'interface', when used in other
+commands such as '''create''' or '''merge'''.
 Usage:
@@ Line 3,915: / Line 6,271: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| remote
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  remote
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 2
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 2
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| data
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| data
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yuma-netconf.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yuma-netconf.yang
 |}
@@ Line 3,946: / Line 6,324: @@
 ** usage: optional
 ** default: none
-** This parameter specifies a boolean filter that should be applied to the stream. <nowiki>Any data in the <running> database (or non-config data) that does not match the filter will be left out of the <rpc-reply> response.</nowiki>
+** This parameter specifies a boolean filter that should be applied to
-*** <nowiki>If no filter is used, the server will return the entire <running> database and all non-config data as well. </nowiki>This could be a lot of data, depending on the server.
+the stream. <nowiki>Any data in the <running> database (or non-config
-*** <nowiki>If the result is empty after the filter is applied to the available data, then the server will send an empty <data> element in the <rpc-reply></nowiki>
+data) that does not match the filter will be left out of the <rpc-reply>
+response.</nowiki>
-*** <nowiki>It is possible that access control will cause the <rpc-reply> to be pruned. </nowiki>The '''netconfd''' server will silently prune any unauthorized payload from the <nowiki><rpc-reply>.</nowiki>
+*** <nowiki>If no filter is used, the server will return the entire
+<running> database and all non-config data as well. </nowiki>This could
+be a lot of data, depending on the server.
+*** <nowiki>If the result is empty after the filter is applied to the
+available data, then the server will send an empty <data> element in the
+<rpc-reply></nowiki>
+*** <nowiki>It is possible that access control will cause the
+<rpc-reply> to be pruned. </nowiki>The '''netconfd''' server will
+silently prune any unauthorized payload from the
+<nowiki><rpc-reply>.</nowiki>
 * '''with-defaults'''
 ** type: enumeration (none report-all report-all-tagged trim explicit)
@@ Line 3,955: / Line 6,343: @@
 ** default: none
 ** capabilities needed: with-defaults
-** <nowiki>This parameter controls how nodes containing only default values are returned in the <rpc-reply>.</nowiki>
+** <nowiki>This parameter controls how nodes containing only default
+values are returned in the <rpc-reply>.</nowiki>
 Positive Response:
@@ Line 3,964: / Line 6,353: @@
 * An error message will be printed if errors are detected locally.
-* <nowiki>An <rpc-error> message will be printed if the server detected an error.</nowiki>
+* <nowiki>An <rpc-error> message will be printed if the server detected
+an error.</nowiki>
 Output:
@@ Line 3,970: / Line 6,360: @@
 * '''data'''
 ** type: anyxml
-** This element will contain the requested data from the '''<nowiki><</nowiki>'''running> database, or non-config data from the server instrumentation.
+** This element will contain the requested data from the
+'''<nowiki><</nowiki>'''running> database, or non-config data from the
+server instrumentation.
 Usage:
@@ Line 3,984: / Line 6,376: @@
      }
-     yangcli [mailto:andy@www.example.com andy@myserver]> '''get [mailto:filter%3D@myfilter.xml filter=@myfilter.xml]
+     yangcli [mailto:andy@www.example.com andy@myserver]> '''get
+[mailto:filter%3D@myfilter.xml filter=@myfilter.xml]
      RPC Data Reply 21 for session 10:
@@ Line 4,004: / Line 6,397: @@
 === get-config ===
-The '''get-config''' command is used to retrieve configuration data from the server.
+The '''get-config''' command is used to retrieve configuration data from
+the server.
@@ Line 4,011: / Line 6,405: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| remote
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  remote
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 3
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 3
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| data
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| data
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yuma-netconf.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yuma-netconf.yang
 |}
@@ Line 4,042: / Line 6,458: @@
 ** usage: optional
 ** default: none
-** This parameter specifies a boolean filter that should be applied to the stream. <nowiki>Any data in the <running> database (or non-config data) that does not match the filter will be left out of the <rpc-reply> response.</nowiki>
+** This parameter specifies a boolean filter that should be applied to
-*** <nowiki>If no filter is used, the server will return the entire <running> database and all non-config data as well. </nowiki>This could be a lot of data, depending on the server.
+the stream. <nowiki>Any data in the <running> database (or non-config
-*** <nowiki>If the result is empty after the filter is applied to the available data, then the server will send an empty <data> element in the <rpc-reply></nowiki>
+data) that does not match the filter will be left out of the <rpc-reply>
+response.</nowiki>
-*** <nowiki>It is possible that access control will cause the <rpc-reply> to be pruned. </nowiki>The '''netconfd''' server will silently prune any unauthorized payload from the <nowiki><rpc-reply>.</nowiki>
+*** <nowiki>If no filter is used, the server will return the entire
+<running> database and all non-config data as well. </nowiki>This could
+be a lot of data, depending on the server.
+*** <nowiki>If the result is empty after the filter is applied to the
+available data, then the server will send an empty <data> element in the
+<rpc-reply></nowiki>
+*** <nowiki>It is possible that access control will cause the
+<rpc-reply> to be pruned. </nowiki>The '''netconfd''' server will
+silently prune any unauthorized payload from the
+<nowiki><rpc-reply>.</nowiki>
 * '''source'''
 ** type: container with 1 of N choice of leafs
 ** usage: mandatory
 ** default: none
-** This parameter specifies the name of the source database for the retrieval operation.
+** This parameter specifies the name of the source database for the
+retrieval operation.
 ** container contents: 1 of N:
 *** '''candidate'''
@@ Line 4,063: / Line 6,490: @@
 *** '''url'''
 **** type: yang:uri
-**** capabilities needed: :url, and the scheme used in the URL must be specified in the :url capability 'schemes' parameter
+**** capabilities needed: :url, and the scheme used in the URL must be
+specified in the :url capability 'schemes' parameter
-**** To enter this parameter, the interactive mode must be used. The shorthand mode (source=url) cannot be used, since this parameter contains a string.
+**** To enter this parameter, the interactive mode must be used. The
+shorthand mode (source=url) cannot be used, since this parameter
+contains a string.
 * '''with-defaults'''
 ** type: enumeration (none report-all report-all-tagged trim explicit)
@@ Line 4,070: / Line 6,500: @@
 ** default: none
 ** capabilities needed: with-defaults
-** <nowiki>This parameter controls how nodes containing only default values are returned in the <rpc-reply>.</nowiki>
+** <nowiki>This parameter controls how nodes containing only default
+values are returned in the <rpc-reply>.</nowiki>
 Positive Response:
@@ Line 4,079: / Line 6,510: @@
 * An error message will be printed if errors are detected locally.
-* <nowiki>An <rpc-error> message will be printed if the server detected an error.</nowiki>
+* <nowiki>An <rpc-error> message will be printed if the server detected
+an error.</nowiki>
 Output:
@@ Line 4,085: / Line 6,517: @@
 * '''data'''
 ** type: anyxml
-** This element will contain the requested data from the '''source''' database.
+** This element will contain the requested data from the '''source'''
+database.
 Usage:
-     yangcli [mailto:andy@www.example.com andy@myserver]> '''$my-config =''' '''get-config target=running'''
+     yangcli [mailto:andy@www.example.com andy@myserver]> '''$my-config
+=''' '''get-config target=running'''
      RPC Data Reply 22 for session 10:
@@ Line 4,100: / Line 6,534: @@
      }
-     yangcli [mailto:andy@www.example.com andy@myserver]> '''@saved-config.xml =''' '''get-config \'''
+     yangcli [mailto:andy@www.example.com andy@myserver]>
+'''@saved-config.xml =''' '''get-config \'''
          [mailto:filter%3D@myfilter.xml filter=@myfilter.xml]  \'''
          '''target=candidate'''
@@ Line 4,118: / Line 6,553: @@
 === get-locks ===
-The '''get-locks'''<nowiki> command is a high-level wrapper for the <lock> operation. </nowiki><nowiki>It is used to lock all the databases (<running> plus <candidate> and/or <startup> if they exist). </nowiki>If all the locks cannot be obtained, then release all the locks that were obtained (all-or-nothing).
+The '''get-locks'''<nowiki> command is a high-level wrapper for the
+<lock> operation. </nowiki><nowiki>It is used to lock all the databases
+(<running> plus <candidate> and/or <startup> if they exist). </nowiki>If
+all the locks cannot be obtained, then release all the locks that were
+obtained (all-or-nothing).
-The entire time to wait for a lock in use is set with the lock-timeout parameter.
+The entire time to wait for a lock in use is set with the lock-timeout
+parameter.
-<nowiki>The retry-interval parameter is used when the <lock> operation fails with a 'lock-denied' error-tag, because some other session has the lock.</nowiki>
+<nowiki>The retry-interval parameter is used when the <lock> operation
+fails with a 'lock-denied' error-tag, because some other session has the
+lock.</nowiki>
-<nowiki>If the <candidate> cannot be locked for another reason, a <discard-changes> operation will be attempted to clear any leftover edits.</nowiki>
+<nowiki>If the <candidate> cannot be locked for another reason, a
+<discard-changes> operation will be attempted to clear any leftover
+edits.</nowiki>
-Normally, the errors received while attempting to acquire locks are not printed to the log, like normal commands. Instead, if $$log-level system parameter is set to 'debug2' or 'debug3', then these messages will be printed.
+Normally, the errors received while attempting to acquire locks are not
+printed to the log, like normal commands. Instead, if $$log-level system
+parameter is set to 'debug2' or 'debug3', then these messages will be
+printed.
@@ Line 4,133: / Line 6,580: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| remote
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  remote
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 3
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 3
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| status
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| status
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yangcli.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yangcli.yang
 |}
@@ Line 4,164: / Line 6,633: @@
 ** usage: optional
 ** default: 120 seconds (2 minutes)
-** This parameter specifies how long to wait for a lock that is in use by another session.
+** This parameter specifies how long to wait for a lock that is in use
+by another session.
 * '''retry-interval'''
 ** type: uint32 (seconds)
@@ Line 4,174: / Line 6,644: @@
 ** usage: optional
 ** default: true
-** This parameter controls whether the 'release-locks' command will be called automatically if the entire set of required locks cannot be granted.
+** This parameter controls whether the 'release-locks' command will be
+called automatically if the entire set of required locks cannot be
+granted.
 Positive Response:
@@ Line 4,183: / Line 6,655: @@
 * An error message will be printed if errors are detected locally.
-* <nowiki>An <rpc-error> message will be printed if the server detected an error.</nowiki>
+* <nowiki>An <rpc-error> message will be printed if the server detected
+an error.</nowiki>
 Usage:
-     yangcli [mailto:andy@www.example.com andy@myserver]> '''get-locks lock-timeout=0'''
+     yangcli [mailto:andy@www.example.com andy@myserver]> '''get-locks
+lock-timeout=0'''
      <nowiki>Sending <lock> operations for get-locks... </nowiki>
@@ Line 4,200: / Line 6,674: @@
 === get-my-session ===
-The''' get-my-session '''command is used to retrieve the session customization parameters from the server. It is only supported by the '''netconfd''' server.
+The''' get-my-session '''command is used to retrieve the session
+customization parameters from the server. It is only supported by the
+'''netconfd''' server.
-The session indent amount, session line size, and default behavior for the with-defaults parameter can be controlled at this time.
+The session indent amount, session line size, and default behavior for
+the with-defaults parameter can be controlled at this time.
@@ Line 4,209: / Line 6,686: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| remote
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  remote
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| data
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| data
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| mysession.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| mysession.yang
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Capabilities needed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Capabilities needed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| none
 |}
@@ Line 4,244: / Line 6,747: @@
 Positive Response:
-* <nowiki>the server returns <indent>, <linesize>, and <with-defaults> elements</nowiki>
+* <nowiki>the server returns <indent>, <linesize>, and <with-defaults>
+elements</nowiki>
 Negative Response:
@@ Line 4,250: / Line 6,754: @@
 * An error message will be printed if errors are detected locally.
-* <nowiki>An <rpc-error> message will be printed if the server detected an error.</nowiki>
+* <nowiki>An <rpc-error> message will be printed if the server detected
+an error.</nowiki>
 Output:
@@ Line 4,263: / Line 6,768: @@
 * '''with-defaults'''
 ** type: enumeration (none report-all trim explicit)
-** This parameter specifies the desired default with-defaults filtering behavior for the session.
+** This parameter specifies the desired default with-defaults filtering
+behavior for the session.
 **
-     yangcli [mailto:andy@www.example.com andy@myserver]>''' get-my-session'''
+     yangcli [mailto:andy@www.example.com andy@myserver]>'''
+get-my-session'''
      RPC Data Reply 25 for session 10:
      rpc-reply {
@@ Line 4,279: / Line 6,786: @@
 === get-schema ===
-The''' get-schema''' command is used to retrieve data model definition files from the server. This is part of the NETCONF monitoring draft. The server must support the ''':schema-retrieval''' capability to use this command.
+The''' get-schema''' command is used to retrieve data model definition
+files from the server. This is part of the NETCONF monitoring draft. The
+server must support the ''':schema-retrieval''' capability to use this
+command.
-If the server reports a module or module version that '''yangcli''' cannot find in its local module library, then an error message will be printed. The '''get-schema''' command can then be used to retrieve the missing module from the server.
+If the server reports a module or module version that '''yangcli'''
+cannot find in its local module library, then an error message will be
+printed. The '''get-schema''' command can then be used to retrieve the
+missing module from the server.
-The '''ietf-netconf-monitoring.yang''' module includes a list of the schema supported by the server, which can be retrieved from a server that supports this module, such as '''netconfd'''.
+The '''ietf-netconf-monitoring.yang''' module includes a list of the
+schema supported by the server, which can be retrieved from a server
+that supports this module, such as '''netconfd'''.
-     yangcli [mailto:andy@myagent andy@myserver]> '''sget /netconf-state/schemas'''
+     yangcli [mailto:andy@myagent andy@myserver]> '''sget
+/netconf-state/schemas'''
-<nowiki>The preceding command will return a <schemas> container with several <schema> child nodes. </nowiki>One example entry is shown below:
+<nowiki>The preceding command will return a <schemas> container with
+several <schema> child nodes. </nowiki>One example entry is shown below:
@@ Line 4,303: / Line 6,820: @@
-<nowiki>The <identifier>, <version> and <format> leafs can be used as the corresponding parameter values for the </nowiki>'''get-schema''' command. See the example below for more details.
+<nowiki>The <identifier>, <version> and <format> leafs can be used as
+the corresponding parameter values for the </nowiki>'''get-schema'''
+command. See the example below for more details.
@@ Line 4,310: / Line 6,829: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| remote
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  remote
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 3
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 3
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 3
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 3
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| data
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| data
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| ietf-netconf-monitoring.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| ietf-netconf-monitoring.yang
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Capabilities needed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| :schema-retrieval
+#000000;border-right:none;padding:0.0403in;"| Capabilities needed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| :schema-retrieval
 |}
@@ Line 4,346: / Line 6,891: @@
 ** default: none
 ** This parameter specifies the name of the module to retrieve.
-*** Do not use any path specification of file extension; just the module name is entered.
+*** Do not use any path specification of file extension; just the module
+name is entered.
-*** The name is case-sensitive, and must be specified exactly as defined.
+*** The name is case-sensitive, and must be specified exactly as
+defined.
 * '''version'''
 ** type: string
@@ Line 4,353: / Line 6,900: @@
 ** default: none
 ** This parameter specifies the version of the module to retrieve.
-*** For YANG modules, this will be the most recent revision date string defined in a module revision statement.
+*** For YANG modules, this will be the most recent revision date string
+defined in a module revision statement.
-*** If any version is acceptable, or if the specific version is not known, then use the empty string.
+*** If any version is acceptable, or if the specific version is not
+known, then use the empty string.
 * '''format'''
 ** type: enumeration (XSD YANG YIN RNG)
@@ Line 4,374: / Line 6,923: @@
 * An error message will be printed if errors are detected locally.
-* <nowiki>An <rpc-error> message will be printed if the server detected an error.</nowiki>
+* <nowiki>An <rpc-error> message will be printed if the server detected
+an error.</nowiki>
 Output:
@@ Line 4,380: / Line 6,930: @@
 * data
 ** type: anyxml
-** '''yangcli''' will strip off this XML container if the command result is being saved to a text file. Only the YANG contents will be saved instead.
+** '''yangcli''' will strip off this XML container if the command result
+is being saved to a text file. Only the YANG contents will be saved
+instead.
 Usage:
-     yangcli [mailto:andy@www.example.com andy@myserver]> '''@notifications.yang = get-schema \'''
+     yangcli [mailto:andy@www.example.com andy@myserver]>
+'''@notifications.yang = get-schema \'''
          '''identifier=notifications \'''
          '''version=2009-06-04 \'''
@@ Line 4,401: / Line 6,954: @@
       with the mgrload command)
-     yangcli [mailto:andy@www.example.com andy@myserver]> '''mgrload notificications.yang'''
+     yangcli [mailto:andy@www.example.com andy@myserver]> '''mgrload
+notificications.yang'''
         OK
@@ Line 4,415: / Line 6,969: @@
 The help command is used to print documentation to STDOUT.
-If no session is active, then only help for the local commands and the standard NETCONF commands will be available.
+If no session is active, then only help for the local commands and the
+standard NETCONF commands will be available.
-If a NETCONF session is active, then the documentation shown will attempt to exactly match the capabilities of the server.
+If a NETCONF session is active, then the documentation shown will
+attempt to exactly match the capabilities of the server.
-If additional (i.e., augment generated) parameters are available, then they will be shown in the command output. If the server does not implement some parameters (e.g., feature not supported) then these parameters will not be shown in the command output.
+If additional (i.e., augment generated) parameters are available, then
+they will be shown in the command output. If the server does not
+implement some parameters (e.g., feature not supported) then these
+parameters will not be shown in the command output.
-If the server has modified an object with deviation statements, then the altered object will be shown.
+If the server has modified an object with deviation statements, then the
+altered object will be shown.
-The '''ncx:hidden''' extension suppresses the '''help''' command. If this extension is present in the YANG definition associated with the request, then no help will be available for that object or command.
+The '''ncx:hidden''' extension suppresses the '''help''' command. If
+this extension is present in the YANG definition associated with the
+request, then no help will be available for that object or command.
@@ Line 4,430: / Line 6,992: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| local
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  local
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| command
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| command
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 3
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 3
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 3
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 3
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| data
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| data
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| ietf-netconf-monitoring.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| ietf-netconf-monitoring.yang
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Capabilities needed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| :schema-retrieval
+#000000;border-right:none;padding:0.0403in;"| Capabilities needed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| :schema-retrieval
 |}
@@ Line 4,466: / Line 7,054: @@
 *** usage: mandatory
 *** default: none
-*** This parameter specifies the name of the command for which documentation is requested
+*** This parameter specifies the name of the command for which
+documentation is requested
 ** '''commands'''
 *** type: empty
@@ Line 4,476: / Line 7,065: @@
 *** usage: mandatory
 *** default: none
-*** This parameter specifies the name of the notification for which documentation is requested
+*** This parameter specifies the name of the notification for which
+documentation is requested
 ** '''object'''
 *** type: string
 *** usage: mandatory
 *** default: none
-*** This parameter specifies the name of the NETCONF database object for which documentation is requested.
+*** This parameter specifies the name of the NETCONF database object for
+which documentation is requested.
 **** Only top level objects are supported by this command.
-**** Documentation for the entire object subtree will be printed, if the object is a container, choice, or list.
+**** Documentation for the entire object subtree will be printed, if the
+object is a container, choice, or list.
-**** Documentation for nested objects is only available in parameter mode, using the escape commands for help ('?') and full help ('??')
+**** Documentation for nested objects is only available in parameter
+mode, using the escape commands for help ('?') and full help ('??')
 ** '''type'''
 *** type: string
 *** usage: mandatory
 *** default: none
-*** This parameter specifies the name of the YANG typedef for which documentation is requested
+*** This parameter specifies the name of the YANG typedef for which
+documentation is requested
-*** Only top-level typedefs are supported by this command. Local typedefs within groupings, containers, or lists are not exportable in YANG.
+*** Only top-level typedefs are supported by this command. Local
+typedefs within groupings, containers, or lists are not exportable in
+YANG.
 * '''choice help-mode''' (not entered) (default choice is 'normal')
 ** '''brief'''
@@ Line 4,496: / Line 7,092: @@
 *** usage: optional
 *** default: none
-*** This parameter specifies that brief documentation mode should be used.
+*** This parameter specifies that brief documentation mode should be
+used.
 ** '''normal'''
 *** type: empty
 *** usage: optional
 *** default: none
-*** This parameter specifies that normal documentation mode should be used.
+*** This parameter specifies that normal documentation mode should be
+used.
 ** '''full'''
 *** type: empty
 *** usage: optional
 *** default: none
-*** This parameter specifies that full documentation mode should be used.
+*** This parameter specifies that full documentation mode should be
+used.
 Positive Response:
@@ Line 4,555: / Line 7,154: @@
  notification sysConfigChange
-    <nowiki>Generated when the <running> configuration is changed. </nowiki>
+    <nowiki>Generated when the <running> configuration is changed.
+</nowiki>
     <nowiki>leaf userName [string] </nowiki>
@@ Line 4,571: / Line 7,171: @@
 === history ===
-The '''history''' command is used to show, clear, load, or save the command line history buffer.
+The '''history''' command is used to show, clear, load, or save the
+command line history buffer.
-Use the '''recall''' command to recall a previously executed command line, after getting the line number from the '''history show''' command.
+Use the '''recall''' command to recall a previously executed command
+line, after getting the line number from the '''history show''' command.
-All lines entered will be saved in the history buffer except an '''ncx:password''' value entered in parameter mode.
+All lines entered will be saved in the history buffer except an
+'''ncx:password''' value entered in parameter mode.
-When '''yangcli''' starts, the command line history buffer is empty. If a history file was previously stored with the '''history save''' command, then it can be recalled into the buffer with the '''history load '''command.
+When '''yangcli''' starts, the command line history buffer is empty. If
+a history file was previously stored with the '''history save'''
+command, then it can be recalled into the buffer with the '''history
+load '''command.
-The''' history clear''' command is used to delete the entire command line history buffer.
+The''' history clear''' command is used to delete the entire command
+line history buffer.
-The numbering sequence for commands, starts from zero and keeps incremented until the program exits. If the history buffer is cleared, then the number sequence will continue, not start over at zero.
+The numbering sequence for commands, starts from zero and keeps
+incremented until the program exits. If the history buffer is cleared,
+then the number sequence will continue, not start over at zero.
@@ Line 4,588: / Line 7,197: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| local
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  local
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| show
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| show
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 2
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 2
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| data
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| data
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yangcli.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yangcli.yang
 |}
@@ Line 4,620: / Line 7,251: @@
 *** usage: optional
 *** default: none
-*** This parameter specifies that the history buffer should be cleared. Unless the contents have been saved with the '''history save''' command, there is no way to recover the cleared buffer contents after this command is executed.
+*** This parameter specifies that the history buffer should be cleared.
+Unless the contents have been saved with the '''history save''' command,
+there is no way to recover the cleared buffer contents after this
+command is executed.
 ** '''load'''
 *** type: string
 *** usage: optional
 *** default: $HOME/.yangcli_history
-*** This parameter specifies a command history file, and causes the current command line history contents to be loaded from that file.
+*** This parameter specifies a command history file, and causes the
+current command line history contents to be loaded from that file.
-*** Special processing for this command allows the history file to be omitted in idle mode, even though the load parameter is not type 'empty'.<br/>
+*** Special processing for this command allows the history file to be
+omitted in idle mode, even though the load parameter is not type
+'empty'.<br/>
@@ Line 4,638: / Line 7,275: @@
 *** usage: optional
 *** default: $HOME/.yangcli_history
-*** This parameter specifies a command history file, and causes the current command line history contents to be saved to that file.
+*** This parameter specifies a command history file, and causes the
+current command line history contents to be saved to that file.
-*** Special processing for this command allows the history file to be omitted in idle mode, even though the save parameter is not type 'empty'.<br/>
+*** Special processing for this command allows the history file to be
+omitted in idle mode, even though the save parameter is not type
+'empty'.<br/>
@@ Line 4,651: / Line 7,291: @@
 *** usage: optional
 *** default: -1
-*** This parameter specifies the maximum number of history entries to show.
+*** This parameter specifies the maximum number of history entries to
+show.
-**** If no case is selected from this choice, then the command ''''history show=-1'''' will be used by default.
-**** The '''help-mode''' choice parameter is only used with the '''history show''' command.
+**** If no case is selected from this choice, then the command
+''''history show=-1'''' will be used by default.
-***** If the '''--brief''' or '''--normal''' modes are selected the the format will include the command number and the command line.
+**** The '''help-mode''' choice parameter is only used with the
-***** If the '''--full''' mode is selected, then the command data and time will also be printed.
-* '''choice help-mode '''(not entered)This parameter is ignored unless the '''history show''' command is entered.
+'''history show''' command.
+***** If the '''--brief''' or '''--normal''' modes are selected the the
+format will include the command number and the command line.
+***** If the '''--full''' mode is selected, then the command data and
+time will also be printed.
+* '''choice help-mode '''(not entered)This parameter is ignored unless
+the '''history show''' command is entered.
 ** '''brief'''
 *** type: empty
 *** usage: optional
 *** default: none
-*** This parameter specifies that brief documentation mode should be used.
+*** This parameter specifies that brief documentation mode should be
+used.
 ** '''normal'''
 *** type: empty
 *** usage: optional
 *** default: none
-*** This parameter specifies that normal documentation mode should be used.
+*** This parameter specifies that normal documentation mode should be
+used.
 ** '''full'''
 *** type: empty
 *** usage: optional
 *** default: none
-*** This parameter specifies that full documentation mode should be used.
+*** This parameter specifies that full documentation mode should be
+used.
 Positive Response:
-* the requested history entries will be printed for the '''history show''' command
+* the requested history entries will be printed for the '''history
+show''' command
 * all other commands will return OK
@@ Line 4,686: / Line 7,336: @@
      yangcli> '''history show=3 full'''
-       <nowiki>[27]</nowiki>    2009-07-04 09:25:34 sget /system --nofill
+       <nowiki>[27]</nowiki>    2009-07-04 09:25:34 sget /system
+--nofill
-       <nowiki>[28]</nowiki>    2009-07-04 09:34:17 @myconfig = get-config source=running
+       <nowiki>[28]</nowiki>    2009-07-04 09:34:17 @myconfig =
+get-config source=running
        <nowiki>[29]</nowiki>    2009-07-04 09:43:54 history show=3 full
@@ Line 4,697: / Line 7,349: @@
 The '''if''' command is used to start a conditional command block.
+The '''expr''' parameter is used to specify the XPath expression to test
-The '''expr''' parameter is used to specify the XPath expression to test if the if conditional block is true or false. A false block will be skipped and a true block will be executed. <nowiki>The command prompt will contain the string '[F]' while inside a false conditional block in interactive mode. </nowiki>This expression string should be entered with quotes to avoid misinterpreting any whitespace or special characters.
+if the if conditional block is true or false. A false block will be
+skipped and a true block will be executed. <nowiki>The command prompt
+will contain the string '[F]' while inside a false conditional block in
+interactive mode. </nowiki>This expression string should be entered with
+quotes to avoid misinterpreting any whitespace or special characters.
-The '''docroot''' parameter (if present) specifies the XML document that the 'expr' parameter should be evaluated against. This is optional, since only XPath path expressions need to refer to a document.
+The '''docroot''' parameter (if present) specifies the XML document that
+the 'expr' parameter should be evaluated against. This is optional,
+since only XPath path expressions need to refer to a document.
-If the 'expr' expression is true, the conditional block will be executed, and no further conditional blocks within the same if command sequence will be executed.
+If the 'expr' expression is true, the conditional block will be
+executed, and no further conditional blocks within the same if command
+sequence will be executed.
@@ Line 4,727: / Line 7,388: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| local
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  local
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| expr
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| expr
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 2
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 2
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| status
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| status
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yangcli.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yangcli.yang
 |}
@@ Line 4,758: / Line 7,441: @@
 ** usage: mandatory
 ** default: none
-** This parameter specifies the XPath expression to determine if the following commands are within a true or false conditional block.
+** This parameter specifies the XPath expression to determine if the
+following commands are within a true or false conditional block.
 * '''docroot'''
 ** type: anyxml
 ** usage: optional (typically a variable reference is used)
 ** default: none
-** This parameter specifies the XML document that should be used if the expr XPath expression references any path nodes.
+** This parameter specifies the XML document that should be used if the
+expr XPath expression references any path nodes.
 Positive Response:
@@ Line 4,772: / Line 7,457: @@
 * An error message will be printed if errors are detected locally.
-** invalid XPath expression or invalid docroot reference will cause an error
+** invalid XPath expression or invalid docroot reference will cause an
+error
 Usage:
@@ Line 4,783: / Line 7,469: @@
 === insert ===
-The insert command is used to insert or move YANG list or leaf-list data into a NETCONF database. <nowiki>It is a high level command with utilizes the YANG 'insert' extensions to the NETCONF <edit-config> operation.</nowiki>
+The insert command is used to insert or move YANG list or leaf-list data
+into a NETCONF database. <nowiki>It is a high level command with
+utilizes the YANG 'insert' extensions to the NETCONF <edit-config>
+operation.</nowiki>
@@ Line 4,790: / Line 7,479: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| remote
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  remote
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| target
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| target
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 2
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 2
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 7
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 7
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| status
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| status
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yangcli.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yangcli.yang
 |}
@@ Line 4,821: / Line 7,532: @@
 ** usage: mandatory
 ** default: none
-** This parameter specifies the where '''yangcli''' should get the data from, for the insert operation. It is either a user variable or from interactive input at the command line.
+** This parameter specifies the where '''yangcli''' should get the data
+from, for the insert operation. It is either a user variable or from
+interactive input at the command line.
 *** '''varref'''
 **** type: string
 **** usage: mandatory
 **** default: none
-**** This parameter specifies the name of the user variable to use for the target of the insert operation. The parameter must exist (e.g., created with the '''fill''' command) or an error message will be printed.
+**** This parameter specifies the name of the user variable to use for
+the target of the insert operation. The parameter must exist (e.g.,
+created with the '''fill''' command) or an error message will be
+printed.
 *** '''case from-cli '''(not entered)
 **** '''target'''
@@ Line 4,832: / Line 7,548: @@
 ***** usage: mandatory
 ***** default: none
-***** This parameter specifies the database target node of the insert operation. This is an '''ncx:schema-instance''' string, so any instance identifier, or absolute path expression, or something in between, is accepted.
+***** This parameter specifies the database target node of the insert
+operation. This is an '''ncx:schema-instance''' string, so any instance
+identifier, or absolute path expression, or something in between, is
+accepted.
 **** '''optional'''
 ***** type: empty
 ***** usage: optional
 ***** default: controlled by '''$$optional''' system variable
-***** This parameter controls whether optional nodes within the target will be filled in. It can be used to override the '''$$optional''' system variable, when it is set to 'false'.
+***** This parameter controls whether optional nodes within the target
+will be filled in. It can be used to override the '''$$optional'''
+system variable, when it is set to 'false'.
 **** '''value'''
 ***** type: anyxml
 ***** usage: mandatory
 ***** default: none
+***** This parameter specifies the value that should be used for the
-***** This parameter specifies the value that should be used for the contents of the '''target''' parameter. If it is entered, then the interactive mode prompting for missing parameters will be skipped, if this parameter is complete (or all mandatory nodes present if the '''$$optional''' system variable is 'false'). For example, if the target is a leaf, then specifying this parameter will always cause the interactive prompt mode to be skipped.
+contents of the '''target''' parameter. If it is entered, then the
+interactive mode prompting for missing parameters will be skipped, if
+this parameter is complete (or all mandatory nodes present if the
+'''$$optional''' system variable is 'false'). For example, if the target
+is a leaf, then specifying this parameter will always cause the
+interactive prompt mode to be skipped.
 * '''edit-target'''
 ** type: string
-** usage: optional (must be present if the order parameter is set to 'before' or 'after').
+** usage: optional (must be present if the order parameter is set to
+'before' or 'after').
 ** default: none
-** This parameter specifies the value or key clause that should be used, as the list or leaf-list insertion point. It identifies the existing entry that the new entry will be inserted before or after, depending on the '''order''' parameter.
+** This parameter specifies the value or key clause that should be used,
+as the list or leaf-list insertion point. It identifies the existing
-*** For a leaf-list, the edit-target contains the value of the target leaf-list node within the configuration being edited. E.g., edit-target='fred'.
+entry that the new entry will be inserted before or after, depending on
-*** For a list, the edit-target contains the key values of the target list node within the configuration being edited. <nowiki>E.g., edit-target=[name='fred'][zipcode=90210]. </nowiki>
+the '''order''' parameter.
+*** For a leaf-list, the edit-target contains the value of the target
+leaf-list node within the configuration being edited. E.g.,
+edit-target='fred'.
+*** For a list, the edit-target contains the key values of the target
+list node within the configuration being edited. <nowiki>E.g.,
+edit-target=[name='fred'][zipcode=90210]. </nowiki>
 * '''order'''
 ** type: enumeration (first last before after)
 ** usage: optional
 ** default: last
-** The insert order that should be used. If the value 'before' or 'after' is selected, then the '''edit-target''' parameter must also be present.
+** The insert order that should be used. If the value 'before' or
+'after' is selected, then the '''edit-target''' parameter must also be
+present.
 * '''operation'''
 ** type: enumeration (create merge replace)
 ** usage: optional
 ** default: merge
-** This parameter specifies the '''nc:operation''' attribute value for the NETCONF <nowiki><edit-config> operation. </nowiki>The insert operation is secondary to the NETCONF operation attribute.
+** This parameter specifies the '''nc:operation''' attribute value for
+the NETCONF <nowiki><edit-config> operation. </nowiki>The insert
+operation is secondary to the NETCONF operation attribute.
 * '''timeout'''
-** type: uint32 (0 = no timeout, otherwise the number of seconds to wait)
+** type: uint32 (0 = no timeout, otherwise the number of seconds to
+wait)
 *
 ** usage: optional
-** default: set to the '''$$timeout''' system variable, default 30 seconds
+** default: set to the '''$$timeout''' system variable, default 30
+seconds
-** This parameter specifies the number of seconds to wait for a response from the server before giving up. The session will not be dropped if a remote command times out, but any late response will be dropped. A value of zero means no timeout should be used, and yangcli will wait forever for a response.
+** This parameter specifies the number of seconds to wait for a response
+from the server before giving up. The session will not be dropped if a
+remote command times out, but any late response will be dropped. A value
+of zero means no timeout should be used, and yangcli will wait forever
+for a response.
 System Variables:
 * '''$$default-operation'''
-** <nowiki>The <default-operation> parameter for the <edit-config> operation will be derived from this variable.</nowiki>
+** <nowiki>The <default-operation> parameter for the <edit-config>
+operation will be derived from this variable.</nowiki>
 * '''$$error-option'''
-** <nowiki>The <error-option> parameter for the <edit-config> operation will be derived from this variable</nowiki>
+** <nowiki>The <error-option> parameter for the <edit-config> operation
+will be derived from this variable</nowiki>
 * '''$$test-option'''
-** <nowiki>The <test-option> parameter for the <edit-config> operation will be derived from this variable</nowiki>
+** <nowiki>The <test-option> parameter for the <edit-config> operation
+will be derived from this variable</nowiki>
 Positive Response:
@@ Line 4,887: / Line 7,635: @@
 * An error message will be printed if errors are detected locally.
-* <nowiki>An <rpc-error> message will be printed if the server detected an error.</nowiki>
+* <nowiki>An <rpc-error> message will be printed if the server detected
+an error.</nowiki>
 Usage:
@@ Line 4,896: / Line 7,645: @@
      RPC OK Reply 25 for session 10:
-     yangcli [mailto:andy@www.example.com andy@myserver]> '''insert /nacm/rules/data-rule''' \
+     yangcli [mailto:andy@www.example.com andy@myserver]> '''insert
+/nacm/rules/data-rule''' \
              '''order=after \'''
              '''<nowiki>edit-target=”[name='test-rule']”</nowiki>'''
@@ Line 4,912: / Line 7,662: @@
 === kill-session ===
-The''' kill-session''' command is used to terminate a NETCONF session (other than the current session). All NETCONF implementations must support this command. It is needed sometimes to unlock a NETCONF database locked by a session that is idle or stuck.
+The''' kill-session''' command is used to terminate a NETCONF session
+(other than the current session). All NETCONF implementations must
+support this command. It is needed sometimes to unlock a NETCONF
+database locked by a session that is idle or stuck.
-If the '''lock'''<nowiki> command returns a 'lock-denied' <error-tag>, it will also include an <error-info> field called <session-id>. </nowiki>This is the session number that currently holds the requested lock. The same value should be used for the '''session-id''' parameter in this command, to terminate the session will the lock.
+If the '''lock'''<nowiki> command returns a 'lock-denied' <error-tag>,
+it will also include an <error-info> field called <session-id>.
+</nowiki>This is the session number that currently holds the requested
+lock. The same value should be used for the '''session-id''' parameter
+in this command, to terminate the session will the lock.
 Note: this is an extreme measure, which should be used with caution.
@@ Line 4,923: / Line 7,680: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| remote
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  remote
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| target
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| target
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| status
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| status
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yuma-netconf.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yuma-netconf.yang
 |}
@@ Line 4,954: / Line 7,733: @@
 ** usage: mandatory
 ** default: none
-** This parameter specifies the session number of the currently active NETCONF session that should be terminated.
+** This parameter specifies the session number of the currently active
+NETCONF session that should be terminated.
 Positive Response:
@@ Line 4,963: / Line 7,743: @@
 * An error message will be printed if errors are detected locally.
-* <nowiki>An <rpc-error> message will be printed if the server detected an error.</nowiki>
+* <nowiki>An <rpc-error> message will be printed if the server detected
+an error.</nowiki>
 Usage:
@@ Line 4,980: / Line 7,761: @@
 === list ===
-This '''list''' command is used to display the commands, objects, and oids (object identifiers) that are available at the time.
+This '''list''' command is used to display the commands, objects, and
+oids (object identifiers) that are available at the time.
-The '''list commands''' command will display the local commands and the remote commands that are available in the current NETCONF session, or which have been loaded with the '''mgrload''' command.
+The '''list commands''' command will display the local commands and the
+remote commands that are available in the current NETCONF session, or
+which have been loaded with the '''mgrload''' command.
-The '''list files '''command will display the data files that are in the current data search path. The module parameter has no affect in this mode.
+The '''list files '''command will display the data files that are in the
+current data search path. The module parameter has no affect in this
+mode.
-The '''list modules '''command will display the YANG files that are in the current YANG module search path. The module parameter has no affect in this mode.
+The '''list modules '''command will display the YANG files that are in
+the current YANG module search path. The module parameter has no affect
+in this mode.
-The''' list objects''' command will display the top-level objects that are currently available in the current NETCONF session, or which have been loaded with the '''mgrload''' command.
+The''' list objects''' command will display the top-level objects that
+are currently available in the current NETCONF session, or which have
+been loaded with the '''mgrload''' command.
-The''' list oids''' command will display the object identifiers of the top-level objects that are currently available in the current NETCONF session, or which have been loaded with the '''mgrload''' command.
+The''' list oids''' command will display the object identifiers of the
+top-level objects that are currently available in the current NETCONF
+session, or which have been loaded with the '''mgrload''' command.
-The '''list scripts '''command will display the script files that are in the current script search path. The module parameter has no affect in this mode.
+The '''list scripts '''command will display the script files that are in
+the current script search path. The module parameter has no affect in
+this mode.
@@ Line 4,999: / Line 7,793: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| local
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  local
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 6
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 6
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| data
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| data
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yangcli.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yangcli.yang
 |}
 Command Parameters:
-* '''choice help-mode '''(not entered)This parameter is ignored if the listtype choice is set to ' the '''history show''' command is entered.
+* '''choice help-mode '''(not entered)This parameter is ignored if the
+listtype choice is set to ' the '''history show''' command is entered.
 ** '''brief'''
 *** type: empty
 *** usage: optional
 *** default: none
-*** This parameter specifies that brief documentation mode should be used.
+*** This parameter specifies that brief documentation mode should be
+used.
 ** '''normal'''
 *** type: empty
 *** usage: optional
 *** default: none
-*** This parameter specifies that normal documentation mode should be used.
+*** This parameter specifies that normal documentation mode should be
+used.
 ** '''full'''
 *** type: empty
 *** usage: optional
 *** default: none
-*** This parameter specifies that full documentation mode should be used.
+*** This parameter specifies that full documentation mode should be
+used.
 * '''choice 'listtype' '''(not entered)
@@ Line 5,051: / Line 7,871: @@
 *** usage: mandatory
 *** default: none
-*** This parameter specifies that the available commands should be listed.
+*** This parameter specifies that the available commands should be
+listed.
-**** If the '''help-mode''' is set to 'brief', then only the command names will be listed.
-**** If the '''help-mode''' is set to 'normal', then the XML prefix and the command name will be listed.
+**** If the '''help-mode''' is set to 'brief', then only the command
+names will be listed.
-**** If the '''help-mode''' is set to 'full', then the module name and the command name will be listed.
+**** If the '''help-mode''' is set to 'normal', then the XML prefix and
+the command name will be listed.
+**** If the '''help-mode''' is set to 'full', then the module name and
+the command name will be listed.
 ** '''files'''
 *** type: empty
 *** usage: mandatory
 *** default: none
-*** This parameter specifies that all the data files in the current data search path should be listed.
+*** This parameter specifies that all the data files in the current data
+search path should be listed.
 ** '''modules'''
 *** type: empty
 *** usage: mandatory
 *** default: none
-*** This parameter specifies that all the YANG files in the current module search path should be listed.
+*** This parameter specifies that all the YANG files in the current
+module search path should be listed.
 ** '''objects'''
 *** type: empty
 *** usage: mandatory
 *** default: none
-*** This parameter specifies that the available top-level objects should be listed.
+*** This parameter specifies that the available top-level objects should
+be listed.
-**** If the '''help-mode''' is set to 'brief', then only the object names will be listed.
-**** If the '''help-mode''' is set to 'normal', then the XML prefix and the object name will be listed.
+**** If the '''help-mode''' is set to 'brief', then only the object
+names will be listed.
-**** If the '''help-mode''' is set to 'full', then the module name and the object name will be listed.
+**** If the '''help-mode''' is set to 'normal', then the XML prefix and
+the object name will be listed.
+**** If the '''help-mode''' is set to 'full', then the module name and
+the object name will be listed.
 ** '''oids'''
 *** type: empty
 *** usage: mandatory
 *** default: none
-*** This parameter specifies that the available top-level object identifiers should be listed.
+*** This parameter specifies that the available top-level object
+identifiers should be listed.
 **** The '''help-mode''' parameter has no effect
 ** '''scripts'''
@@ Line 5,083: / Line 7,914: @@
 *** usage: mandatory
 *** default: none
-*** This parameter specifies that all the script files in the current script search path should be listed.
+*** This parameter specifies that all the script files in the current
+script search path should be listed.
 * '''module'''
 ** type: string
 ** usage: optional
 ** default: none
-** This parameter specifies a module name. If present then only information for the specified YANG module will be displayed.
+** This parameter specifies a module name. If present then only
+information for the specified YANG module will be displayed.
 Positive Response:
@@ Line 5,149: / Line 7,982: @@
 This command is only supported by the '''netconfd''' server.
-The YANG files must be available in the module search path for the server.
+The YANG files must be available in the module search path for the
+server.
-Refer to the '''netconfd''' configuration section for more details on adding new YANG modules into the server.
+Refer to the '''netconfd''' configuration section for more details on
+adding new YANG modules into the server.
-After using this command, the '''mgrload''' command may also be needed to keep the current session synchronized with the server.
+After using this command, the '''mgrload''' command may also be needed
+to keep the current session synchronized with the server.
-Use the '''revision''' parameter to load a specific revision of a module.
+Use the '''revision''' parameter to load a specific revision of a
+module.
-The server will return the revision date of the module that was loaded (or already present).
+The server will return the revision date of the module that was loaded
+(or already present).
@@ Line 5,164: / Line 8,002: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| remote
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  remote
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| module
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| module
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 3
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 3
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| data
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| data
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yuma-system.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yuma-system.yang
 |}
@@ Line 5,205: / Line 8,065: @@
 ** usage: optional (0 or more instances)
 ** default: none
-** This parameter specifies a deviation module to load prior to loading the requested module.
+** This parameter specifies a deviation module to load prior to loading
+the requested module.
 Positive Response:
@@ Line 5,214: / Line 8,075: @@
 * An error message will be printed if errors are detected locally.
-* <nowiki>An <rpc-error> message will be printed if the server detected an error.</nowiki>
+* <nowiki>An <rpc-error> message will be printed if the server detected
+an error.</nowiki>
 Usage:
@@ Line 5,230: / Line 8,092: @@
 === lock ===
-The '''lock''' command is used to request a global lock on a NETCONF database. It is used, along with the '''unlock''' command, to obtain exclusive write access to the NETCONF server.
+The '''lock''' command is used to request a global lock on a NETCONF
+database. It is used, along with the '''unlock''' command, to obtain
+exclusive write access to the NETCONF server.
-The scope of a lock command is the lifetime of the session that requested the lock. This means that if the session that owns the lock is dropped for any reason, all the locks it holds will be released immediately by the server.
+The scope of a lock command is the lifetime of the session that
+requested the lock. This means that if the session that owns the lock is
+dropped for any reason, all the locks it holds will be released
+immediately by the server.
-The use of database locks is optional in NETCONF, but it must be implemented by every server. It is strongly suggested that locks be used if multiple managers are likely to log into the particular NETCONF server.
+The use of database locks is optional in NETCONF, but it must be
+implemented by every server. It is strongly suggested that locks be used
+if multiple managers are likely to log into the particular NETCONF
+server.
 One or more locks may be needed to execute a transaction safely:
-* If the ''':writable-running'''<nowiki> capability is supported, then a lock on the <running> database is needed. </nowiki>This database can be locked at any time.
+* If the ''':writable-running'''<nowiki> capability is supported, then a
-* If the ''':startup'''<nowiki> capability is supported, then a lock on the <startup> database is needed. </nowiki>This database can be locked at any time.
+lock on the <running> database is needed. </nowiki>This database can be
+locked at any time.
-* If the ''':candidate'''<nowiki> capability is supported, then a lock on the <candidate> database is needed. </nowiki><nowiki>A lock on the <running> database is also needed. </nowiki>
+* If the ''':startup'''<nowiki> capability is supported, then a lock on
-** <nowiki>The <candidate> database can only be locked if there are no active edits in it.</nowiki>
+the <startup> database is needed. </nowiki>This database can be locked
-** The '''discard-changes'''<nowiki> command may be needed to clear a <candidate> database that has been left edited by a session that terminated unexpectedly.</nowiki>
+at any time.
-** <nowiki>Note: There is no way in NETCONF to tell the difference between an actively edited <candidate> database and an 'abandoned' <candidate> database. </nowiki><nowiki>The server will almost never clear the <candidate> </nowiki>database. It will only clear any locks held. Use the discard-changes command (for other session's edits) with extreme caution.
+* If the ''':candidate'''<nowiki> capability is supported, then a lock
+on the <candidate> database is needed. </nowiki><nowiki>A lock on the
+<running> database is also needed. </nowiki>
+** <nowiki>The <candidate> database can only be locked if there are no
+active edits in it.</nowiki>
+** The '''discard-changes'''<nowiki> command may be needed to clear a
+<candidate> database that has been left edited by a session that
+terminated unexpectedly.</nowiki>
+** <nowiki>Note: There is no way in NETCONF to tell the difference
+between an actively edited <candidate> database and an 'abandoned'
+<candidate> database. </nowiki><nowiki>The server will almost never
+clear the <candidate> </nowiki>database. It will only clear any locks
+held. Use the discard-changes command (for other session's edits) with
+extreme caution.
 <center>'''lock command'''</center>
@@ Line 5,249: / Line 8,133: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| remote
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  remote
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| status
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| status
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yuma-netconf.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yuma-netconf.yang
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Capabilities needed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Capabilities needed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Capabilities optional:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| :candidate:startup:url
+#000000;border-right:none;padding:0.0403in;"| Capabilities optional:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| :candidate:startup:url
 |}
@@ Line 5,288: / Line 8,202: @@
 ** usage: mandatory
 ** default: none
-** This parameter specifies the name of the target database to be locked.
+** This parameter specifies the name of the target database to be
+locked.
 ** container contents: 1 of N:
 *** '''candidate'''
@@ Line 5,301: / Line 8,216: @@
 *** '''url'''
 **** type: yang:uri
-**** capabilities needed: :url, and the scheme used in the URL must be specified in the :url capability 'schemes' parameter.
+**** capabilities needed: :url, and the scheme used in the URL must be
+specified in the :url capability 'schemes' parameter.
-**** To enter this parameter, the interactive mode must be used. The shorthand mode (target=url) cannot be used, since this parameter contains a string.
+**** To enter this parameter, the interactive mode must be used. The
+shorthand mode (target=url) cannot be used, since this parameter
+contains a string.
 Positive Response:
@@ Line 5,311: / Line 8,229: @@
 * An error message will be printed if errors are detected locally.
-* <nowiki>An <rpc-error> message will be printed if the server detected an error.</nowiki>
+* <nowiki>An <rpc-error> message will be printed if the server detected
+an error.</nowiki>
-** <nowiki>If the <error-tag> is 'lock-denied' then the <error-info> will contain a <session-id> leaf. </nowiki>This identifies the session number of the current lock holder.
+** <nowiki>If the <error-tag> is 'lock-denied' then the <error-info>
+will contain a <session-id> leaf. </nowiki>This identifies the session
+number of the current lock holder.
 Usage:
@@ Line 5,324: / Line 8,245: @@
 === log-debug ===
-The''' log-debug''' command prints a message to the program log, if the '''$$log-level''' system variable is set to 'debug' or a higher enumeration (e.g., 'debug2').
+The''' log-debug''' command prints a message to the program log, if the
+'''$$log-level''' system variable is set to 'debug' or a higher
+enumeration (e.g., 'debug2').
 The '''msg''' parameter is used to provide the message string to print.
@@ Line 5,333: / Line 8,256: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| local
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  local
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| msg
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| msg
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| status
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| status
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yangcli.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yangcli.yang
 |}
@@ Line 5,372: / Line 8,317: @@
 Negative Response:
-* An error message will be printed if the '''msg''' parameter contains errors.
+* An error message will be printed if the '''msg''' parameter contains
+errors.
 Usage:
@@ Line 5,385: / Line 8,331: @@
 === log-error ===
-The '''log-error''' command prints a message to the program log, if the '''$$log-level''' system variable is set to 'error' or a higher enumeration (e.g., 'info').
+The '''log-error''' command prints a message to the program log, if the
+'''$$log-level''' system variable is set to 'error' or a higher
+enumeration (e.g., 'info').
 The '''msg''' parameter is used to provide the message string to print.
@@ Line 5,394: / Line 8,342: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| local
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  local
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| msg
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| msg
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| status
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| status
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yangcli.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yangcli.yang
 |}
@@ Line 5,433: / Line 8,403: @@
 Negative Response:
-* An error message will be printed if the '''msg''' parameter contains errors.
+* An error message will be printed if the '''msg''' parameter contains
+errors.
 Usage:
@@ Line 5,446: / Line 8,417: @@
 === log-info ===
-The '''log-info''' command prints a message to the program log, if the '''$$log-level''' system variable is set to 'info' or a higher enumeration (e.g., 'debug').
+The '''log-info''' command prints a message to the program log, if the
+'''$$log-level''' system variable is set to 'info' or a higher
+enumeration (e.g., 'debug').
 The '''msg''' parameter is used to provide the message string to print.
@@ Line 5,455: / Line 8,428: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| local
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  local
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| msg
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| msg
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| status
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| status
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yangcli.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yangcli.yang
 |}
@@ Line 5,494: / Line 8,489: @@
 Negative Response:
-* An error message will be printed if the '''msg''' parameter contains errors.
+* An error message will be printed if the '''msg''' parameter contains
+errors.
 Usage:
@@ Line 5,507: / Line 8,503: @@
 === log-warn ===
-The '''log-warn''' command prints a message to the program log, if the '''$$log-level''' system variable is set to 'warn' or a higher enumeration (e.g., 'debug').
+The '''log-warn''' command prints a message to the program log, if the
+'''$$log-level''' system variable is set to 'warn' or a higher
+enumeration (e.g., 'debug').
 The '''msg''' parameter is used to provide the message string to print.
@@ Line 5,516: / Line 8,514: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| local
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  local
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| msg
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| msg
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| status
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| status
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yangcli.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yangcli.yang
 |}
@@ Line 5,555: / Line 8,575: @@
 Negative Response:
-* An error message will be printed if the '''msg''' parameter contains errors.
+* An error message will be printed if the '''msg''' parameter contains
+errors.
 Usage:
@@ Line 5,568: / Line 8,589: @@
 === merge ===
-The '''merge'''<nowiki> command is a high-level <edit-config> operation. </nowiki>It is used to merge some new nodes into the default target database.
+The '''merge'''<nowiki> command is a high-level <edit-config> operation.
+</nowiki>It is used to merge some new nodes into the default target
+database.
-A target node is specified (in 1 of 2 ways), and then the data structure is filled in. Only mandatory nodes will be filled in unless the '''$$optional''' system variable is set to 'true'.
+A target node is specified (in 1 of 2 ways), and then the data structure
+is filled in. Only mandatory nodes will be filled in unless the
+'''$$optional''' system variable is set to 'true'.
-Refer to the '''fill''' command for more details on interactive mode data structure completion.
+Refer to the '''fill''' command for more details on interactive mode
+data structure completion.
@@ Line 5,579: / Line 8,605: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| remote
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  remote
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| target
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| target
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 5
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 5
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| status
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| status
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yangcli.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yangcli.yang
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Capabilities needed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| :candidate or :writable-running
+#000000;border-right:none;padding:0.0403in;"| Capabilities needed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| :candidate or :writable-running
 |}
@@ Line 5,614: / Line 8,666: @@
 ** usage: mandatory
 ** default: none
-** This parameter specifies the where '''yangcli''' should get the data from, for the merge operation. It is either a user variable or from interactive input at the command line.
+** This parameter specifies the where '''yangcli''' should get the data
+from, for the merge operation. It is either a user variable or from
+interactive input at the command line.
 *** '''varref'''
 **** type: string
 **** usage: mandatory
 **** default: none
-**** This parameter specifies the name of the user variable to use for the target of the merge operation. The parameter must exist (e.g., created with the '''fill''' command) or an error message will be printed.
+**** This parameter specifies the name of the user variable to use for
+the target of the merge operation. The parameter must exist (e.g.,
+created with the '''fill''' command) or an error message will be
+printed.
 *** '''case from-cli '''(not entered)
 **** '''target'''
@@ Line 5,625: / Line 8,682: @@
 ***** usage: optional (target or urltarget must be entered)
 ***** default: none
-***** This parameter specifies the database target node of the merge operation. This is an '''ncx:schema-instance''' string, so any instance identifier, or absolute path expression, or something in between, is accepted.
+***** This parameter specifies the database target node of the merge
+operation. This is an '''ncx:schema-instance''' string, so any instance
+identifier, or absolute path expression, or something in between, is
+accepted.
 **** '''urltarget'''
 ***** type: string
 ***** usage: optional
 ***** default: none
-***** This parameter specifies the database target node of the merge operation. This is an '''UrlPath''' string.
+***** This parameter specifies the database target node of the merge
+operation. This is an '''UrlPath''' string.
 **** '''optional'''
 ***** type: empty
 ***** usage: optional
 ***** default: controlled by '''$$optional''' system variable
-***** This parameter controls whether optional nodes within the target will be filled in. It can be used to override the '''$$optional '''system variable, when it is set to 'false'.
+***** This parameter controls whether optional nodes within the target
+will be filled in. It can be used to override the '''$$optional
+'''system variable, when it is set to 'false'.
 **** '''value'''
 ***** type: anyxml
 ***** usage: mandatory
 ***** default: none
+***** This parameter specifies the value that should be used for the
-***** This parameter specifies the value that should be used for the contents of the '''target''' parameter. If it is entered, then the interactive mode prompting for missing parameters will be skipped, if this parameter is complete (or all mandatory nodes present if the '''$$optional''' system variable is 'false'). For example, if the target is a leaf, then specifying this parameter will always cause the interactive prompt mode to be skipped.
+contents of the '''target''' parameter. If it is entered, then the
+interactive mode prompting for missing parameters will be skipped, if
+this parameter is complete (or all mandatory nodes present if the
+'''$$optional''' system variable is 'false'). For example, if the target
+is a leaf, then specifying this parameter will always cause the
+interactive prompt mode to be skipped.
 * '''timeout'''
-** type: uint32 (0 = no timeout, otherwise the number of seconds to wait)
+** type: uint32 (0 = no timeout, otherwise the number of seconds to
+wait)
 *
 ** usage: optional
-** default: set to the '''$$timeout''' system variable, default 30 seconds
+** default: set to the '''$$timeout''' system variable, default 30
+seconds
-** This parameter specifies the number of seconds to wait for a response from the server before giving up. The session will not be dropped if a remote command times out, but any late response will be dropped. A value of zero means no timeout should be used, and '''yangcli''' will wait forever for a response.
+** This parameter specifies the number of seconds to wait for a response
+from the server before giving up. The session will not be dropped if a
+remote command times out, but any late response will be dropped. A value
+of zero means no timeout should be used, and '''yangcli''' will wait
+forever for a response.
 System Variables:
 * '''$$default-operation'''
-** <nowiki>The <default-operation> parameter for the <edit-config> operation will be derived from this variable.</nowiki>
+** <nowiki>The <default-operation> parameter for the <edit-config>
+operation will be derived from this variable.</nowiki>
 * '''$$error-option'''
-** <nowiki>The <error-option> parameter for the <edit-config> operation will be derived from this variable</nowiki>
+** <nowiki>The <error-option> parameter for the <edit-config> operation
+will be derived from this variable</nowiki>
 * '''$$test-option'''
-** <nowiki>The <test-option> parameter for the <edit-config> operation will be derived from this variable</nowiki>
+** <nowiki>The <test-option> parameter for the <edit-config> operation
+will be derived from this variable</nowiki>
 Positive Response:
@@ Line 5,666: / Line 8,744: @@
 * An error message will be printed if errors are detected locally.
-* <nowiki>An <rpc-error> message will be printed if the server detected an error.</nowiki>
+* <nowiki>An <rpc-error> message will be printed if the server detected
+an error.</nowiki>
 Usage:
      yangcli [mailto:andy@www.example.com andy@myserver]> '''merge \'''
-         '''<nowiki>target=/nacm/rules/moduleRule[moduleName='netconf']\</nowiki>'''
-         '''<nowiki>[allowed-rights='read write']/allowed-group</nowiki>''' '''\'''
+'''<nowiki>target=/nacm/rules/moduleRule[moduleName='netconf']\</nowiki>'''
+         '''<nowiki>[allowed-rights='read
+write']/allowed-group</nowiki>''' '''\'''
          '''value=ncx:guest'''
-     <nowiki>(no user prompting; <edit-config> request sent right away)</nowiki>
+     <nowiki>(no user prompting; <edit-config> request sent right
+away)</nowiki>
      RPC OK Reply 31 for session 10:
@@ Line 5,688: / Line 8,770: @@
 === mgrload ===
-The '''mgrload''' command is used to load a YANG module into '''yangcli'''.
+The '''mgrload''' command is used to load a YANG module into
+'''yangcli'''.
-The YANG files must be available in the module search path for '''yangcli'''.
+The YANG files must be available in the module search path for
+'''yangcli'''.
@@ Line 5,697: / Line 8,781: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| local
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  local
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| module
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| module
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 3
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 3
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| status
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| status
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yangcli.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yangcli.yang
 |}
@@ Line 5,738: / Line 8,844: @@
 ** usage: optional (0 or more instances)
 ** default: none
-** This parameter specifies a deviation module to load prior to loading the requested module.
+** This parameter specifies a deviation module to load prior to loading
+the requested module.
 Positive Response:
@@ Line 5,757: / Line 8,864: @@
 === no-op ===
-The''' no-op'''<nowiki> command is used to test server message processing response times, by providing a baseline response time to do nothing except return <ok/>.</nowiki>
+The''' no-op'''<nowiki> command is used to test server message
+processing response times, by providing a baseline response time to do
+nothing except return <ok/>.</nowiki>
-It can also be used as an application-level keep-alive to prevent proxy idle timeout or server idle timeout problems from occurring.
+It can also be used as an application-level keep-alive to prevent proxy
+idle timeout or server idle timeout problems from occurring.
-This command is only supported by the '''netconfd''' server. The server will simply respond 'OK', if the request is well-formed.
+This command is only supported by the '''netconfd''' server. The server
+will simply respond 'OK', if the request is well-formed.
@@ Line 5,768: / Line 8,879: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| remote
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  remote
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| status
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| status
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yuma-system.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yuma-system.yang
 |}
@@ Line 5,800: / Line 8,933: @@
 * An error message will be printed if errors are detected locally.
-* <nowiki>An <rpc-error> message will be printed if the server detected an error.</nowiki>
+* <nowiki>An <rpc-error> message will be printed if the server detected
+an error.</nowiki>
 Usage:
@@ Line 5,819: / Line 8,953: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| local
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  local
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| status
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| status
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yangcli.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yangcli.yang
 |}
@@ Line 5,864: / Line 9,020: @@
 The '''quit''' command is used to terminate the '''yangcli''' program.
-If a NETCONF session is in progress, it will be dropped without sending a '''close-session''' command first. This should be taken into account if the server reports dropped TCP connections as an error.
+If a NETCONF session is in progress, it will be dropped without sending
+a '''close-session''' command first. This should be taken into account
+if the server reports dropped TCP connections as an error.
@@ Line 5,871: / Line 9,029: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| local
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  local
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yangcli.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yangcli.yang
 |}
@@ Line 5,912: / Line 9,092: @@
 === recall ===
-The '''recall''' command is used to recall a previously entered command line from the command line history buffer.
+The '''recall''' command is used to recall a previously entered command
+line from the command line history buffer.
-A command is recalled by its command ID number. Use the '''history show''' command to see the contents of the command line history buffer.
+A command is recalled by its command ID number. Use the '''history
+show''' command to see the contents of the command line history buffer.
@@ Line 5,921: / Line 9,103: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| local
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  local
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| index
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| index
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| data
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| data
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yangcli.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yangcli.yang
 |}
@@ Line 5,962: / Line 9,166: @@
 === release-locks ===
-The '''release-locks''' command is used to release all the locks that were previously granted with the get-locks command.
+The '''release-locks''' command is used to release all the locks that
+were previously granted with the get-locks command.
-If the get-locks command was not used, then this command will fail with an error message that no locks are active to unlock.
+If the get-locks command was not used, then this command will fail with
+an error message that no locks are active to unlock.
@@ Line 5,971: / Line 9,177: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| remote
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  remote
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| status
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| status
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yangcli.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yangcli.yang
 |}
@@ Line 6,003: / Line 9,231: @@
 * An error message will be printed if errors are detected locally.
-* <nowiki>An <rpc-error> message will be printed if the server detected an error.</nowiki>
+* <nowiki>An <rpc-error> message will be printed if the server detected
+an error.</nowiki>
 Usage: (showing 2 locks being released)
@@ Line 6,016: / Line 9,245: @@
 === replace ===
-The '''replace'''<nowiki> command is a high-level <edit-config> operation. </nowiki>It is used to replace an existing subtree with some new nodes, in the default target database.
+The '''replace'''<nowiki> command is a high-level <edit-config>
+operation. </nowiki>It is used to replace an existing subtree with some
+new nodes, in the default target database.
-Only the subtree indicated by the '''target''' or '''varref''' parameter will be replaced.
+Only the subtree indicated by the '''target''' or '''varref''' parameter
+will be replaced.
-A target node is specified (in 1 of 2 ways), and then the data structure is filled in. Only mandatory nodes will be filled in unless the '''$$optional''' system variable is set to 'true'.
+A target node is specified (in 1 of 2 ways), and then the data structure
+is filled in. Only mandatory nodes will be filled in unless the
+'''$$optional''' system variable is set to 'true'.
-Refer to the '''fill''' command for more details on interactive mode data structure completion.
+Refer to the '''fill''' command for more details on interactive mode
+data structure completion.
@@ Line 6,029: / Line 9,264: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| remote
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  remote
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| target
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| target
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 5
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 5
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| status
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| status
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yangcli.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yangcli.yang
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Capabilities needed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| :candidate or :writable-running
+#000000;border-right:none;padding:0.0403in;"| Capabilities needed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| :candidate or :writable-running
 |}
@@ Line 6,064: / Line 9,325: @@
 ** usage: mandatory
 ** default: none
-** This parameter specifies the where '''yangcli''' should get the data from, for the replace operation. It is either a user variable or from interactive input at the command line.
+** This parameter specifies the where '''yangcli''' should get the data
+from, for the replace operation. It is either a user variable or from
+interactive input at the command line.
 *** '''varref'''
 **** type: string
 **** usage: mandatory
 **** default: none
-**** This parameter specifies the name of the user variable to use for the target of the replace operation. The parameter must exist (e.g., created with the '''fill''' command) or an error message will be printed.
+**** This parameter specifies the name of the user variable to use for
+the target of the replace operation. The parameter must exist (e.g.,
+created with the '''fill''' command) or an error message will be
+printed.
 *** '''case from-cli '''(not entered)
 **** '''target'''
@@ Line 6,075: / Line 9,341: @@
 ***** usage: optional (target or urltarget must be present)
 ***** default: none
-***** This parameter specifies the database target node of the replace operation. This is an '''ncx:schema-instance''' string, so any instance identifier, or absolute path expression, or something in between, is accepted.
+***** This parameter specifies the database target node of the replace
+operation. This is an '''ncx:schema-instance''' string, so any instance
+identifier, or absolute path expression, or something in between, is
+accepted.
 **** '''urltarget'''
 ***** type: string
 ***** usage: optional
 ***** default: none
-***** This parameter specifies the database target node of the replace operation. This is an '''UrlPath''' string.
+***** This parameter specifies the database target node of the replace
+operation. This is an '''UrlPath''' string.
 **** '''optional'''
 ***** type: empty
 ***** usage: optional
 ***** default: controlled by '''$$optional''' system variable
-***** This parameter controls whether optional nodes within the target will be filled in. It can be used to override the '''$$optional '''system variable, when it is set to 'false'.
+***** This parameter controls whether optional nodes within the target
+will be filled in. It can be used to override the '''$$optional
+'''system variable, when it is set to 'false'.
 **** '''value'''
 ***** type: anyxml
 ***** usage: mandatory
 ***** default: none
+***** This parameter specifies the value that should be used for the
-***** This parameter specifies the value that should be used for the contents of the '''target''' parameter. If it is entered, then the interactive mode prompting for missing parameters will be skipped, if this parameter is complete (or all mandatory nodes present if the '''$$optional''' system variable is 'false'). For example, if the target is a leaf, then specifying this parameter will always cause the interactive prompt mode to be skipped.
+contents of the '''target''' parameter. If it is entered, then the
+interactive mode prompting for missing parameters will be skipped, if
+this parameter is complete (or all mandatory nodes present if the
+'''$$optional''' system variable is 'false'). For example, if the target
+is a leaf, then specifying this parameter will always cause the
+interactive prompt mode to be skipped.
 * '''timeout'''
-** type: uint32 (0 = no timeout, otherwise the number of seconds to wait)
+** type: uint32 (0 = no timeout, otherwise the number of seconds to
+wait)
 *
 ** usage: optional
-** default: set to the '''$$timeout''' system variable, default 30 seconds
+** default: set to the '''$$timeout''' system variable, default 30
+seconds
-** This parameter specifies the number of seconds to wait for a response from the server before giving up. The session will not be dropped if a remote command times out, but any late response will be dropped. A value of zero means no timeout should be used, and '''yangcli''' will wait forever for a response.
+** This parameter specifies the number of seconds to wait for a response
+from the server before giving up. The session will not be dropped if a
+remote command times out, but any late response will be dropped. A value
+of zero means no timeout should be used, and '''yangcli''' will wait
+forever for a response.
 System Variables:
 * '''$$default-operation'''
-** <nowiki>The <default-operation> parameter for the <edit-config> operation will be derived from this variable.</nowiki>
+** <nowiki>The <default-operation> parameter for the <edit-config>
+operation will be derived from this variable.</nowiki>
 * '''$$error-option'''
-** <nowiki>The <error-option> parameter for the <edit-config> operation will be derived from this variable</nowiki>
+** <nowiki>The <error-option> parameter for the <edit-config> operation
+will be derived from this variable</nowiki>
 * '''$$test-option'''
-** <nowiki>The <test-option> parameter for the <edit-config> operation will be derived from this variable</nowiki>
+** <nowiki>The <test-option> parameter for the <edit-config> operation
+will be derived from this variable</nowiki>
 Positive Response:
@@ Line 6,116: / Line 9,403: @@
 * An error message will be printed if errors are detected locally.
-* <nowiki>An <rpc-error> message will be printed if the server detected an error.</nowiki>
+* <nowiki>An <rpc-error> message will be printed if the server detected
+an error.</nowiki>
 Usage:
-     yangcli [mailto:andy@www.example.com andy@myserver]> '''replace \'''
+     yangcli [mailto:andy@www.example.com andy@myserver]> '''replace
+\'''
-         '''<nowiki>target=/nacm/rules/moduleRule[moduleName='yuma-system']\</nowiki>'''
+'''<nowiki>target=/nacm/rules/moduleRule[moduleName='yuma-system']\</nowiki>'''
          '''<nowiki>[allowed-rights='exec']</nowiki>'''
-     <nowiki>(user prompted to fill in specified <moduleRule> element)</nowiki>
+     <nowiki>(user prompted to fill in specified <moduleRule>
+element)</nowiki>
      RPC OK Reply 31 for session 10:
@@ Line 6,141: / Line 9,432: @@
 This command is only supported by the '''netconfd''' server.
-The default access control configuration for '''netconfd''' will not allow any user except the designated 'superuser' account to invoke this command. Refer to the '''netconfd''' user manual for details on configuring access control.
+The default access control configuration for '''netconfd''' will not
+allow any user except the designated 'superuser' account to invoke this
+command. Refer to the '''netconfd''' user manual for details on
+configuring access control.
@@ Line 6,148: / Line 9,442: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| remote
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  remote
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| status
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| status
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yuma-system.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yuma-system.yang
 |}
@@ Line 6,180: / Line 9,496: @@
 * An error message will be printed if errors are detected locally.
-* <nowiki>An <rpc-error> message will be printed if the server detected an error.</nowiki>
+* <nowiki>An <rpc-error> message will be printed if the server detected
+an error.</nowiki>
 Usage:
@@ Line 6,196: / Line 9,513: @@
 Refer to the section on scripts for details on how to write a script.
-The script name is the only mandatory parameter. There are 9 generic parameters (named P1 to P9) that can be used to pass string parameters to scripts. Within a script, these are referenced with local variables ($1 to $9).
+The script name is the only mandatory parameter. There are 9 generic
+parameters (named P1 to P9) that can be used to pass string parameters
+to scripts. Within a script, these are referenced with local variables
+($1 to $9).
 The run command can be used within a script.
@@ Line 6,202: / Line 9,522: @@
 Scripts do not return any status or data at this time.
-The run command can appear inside a script, starting a new run level. An error will occur if a loop occurs or too many nest levels are used. Up to 64 run levels are supported in '''yangcli'''.
+The run command can appear inside a script, starting a new run level. An
+error will occur if a loop occurs or too many nest levels are used. Up
+to 64 run levels are supported in '''yangcli'''.
@@ Line 6,209: / Line 9,531: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| local
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  local
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| script
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| script
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 10
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 10
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| status
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| status
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yangcli.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yangcli.yang
 |}
@@ Line 6,240: / Line 9,584: @@
 ** usage: optional
 ** default: none
-** These parameters provide a generic string parameter passing mechanism for each script invocation, similar to unix shell scripts. Within the script, the parameters''' $1''', '''$2,''' '''$3''', '''$4''',''' $5''', '''$6''', '''$7''', '''$8''' and '''$9''' will be non-NULL only if the corresponding ''''Pn'''' parameter was set in the script invocation.
+** These parameters provide a generic string parameter passing mechanism
+for each script invocation, similar to unix shell scripts. Within the
+script, the parameters''' $1''', '''$2,''' '''$3''', '''$4''',''' $5''',
+'''$6''', '''$7''', '''$8''' and '''$9''' will be non-NULL only if the
+corresponding ''''Pn'''' parameter was set in the script invocation.
 * '''script'''
 ** type: string
 ** usage: mandatory
 ** default: none
-** This parameter specifis the name of the script to be run. If a path specification is included, then it will be used. Otherwise the current script search path will be used to find the script.
+** This parameter specifis the name of the script to be run. If a path
+specification is included, then it will be used. Otherwise the current
+script search path will be used to find the script.
 System Variables:
 * '''$$runpath'''
-** Controls where '''yangcli''' will look for files specified in the '''script''' parameter.
+** Controls where '''yangcli''' will look for files specified in the
+'''script''' parameter.
 Positive Response:
@@ Line 6,259: / Line 9,610: @@
 * An error message will be printed if errors are detected locally.
-* <nowiki>An <rpc-error> message will be printed if the server detected an error, if any remote commands are contained in the script.</nowiki>
+* <nowiki>An <rpc-error> message will be printed if the server detected
+an error, if any remote commands are contained in the script.</nowiki>
 Usage:
@@ Line 6,274: / Line 9,626: @@
 === save ===
-The '''save''' command is used to save NETCONF database edits to non-volatile storage, on the server. <nowiki>It is a pseudo-command, mapped to other remote commands depending on which database target is supported by the server (<candidate> or <running>).</nowiki>
+The '''save''' command is used to save NETCONF database edits to
+non-volatile storage, on the server. <nowiki>It is a pseudo-command,
+mapped to other remote commands depending on which database target is
+supported by the server (<candidate> or <running>).</nowiki>
-The '''save''' command usually maps to either the '''commit''' or the '''copy-config''' command. Refer to the section on NETCONF sessions for more details.
+The '''save''' command usually maps to either the '''commit''' or the
+'''copy-config''' command. Refer to the section on NETCONF sessions for
+more details.
@@ Line 6,283: / Line 9,640: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| remote
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  remote
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yangcli.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yangcli.yang
 |}
@@ Line 6,316: / Line 9,695: @@
 * An error message will be printed if errors are detected locally.
-* <nowiki>An <rpc-error> message will be printed if the server detected an error.</nowiki>
+* <nowiki>An <rpc-error> message will be printed if the server detected
+an error.</nowiki>
 Usage:
@@ Line 6,328: / Line 9,708: @@
 === set-log-level ===
-The''' set-log-level '''command is used to configure the server logging verbosity level. It is only supported by the '''netconfd''' server.
+The''' set-log-level '''command is used to configure the server logging
+verbosity level. It is only supported by the '''netconfd''' server.
-This operation is defined as '''nacm:secure''', so only the system super-user can invoke this command by default.
+This operation is defined as '''nacm:secure''', so only the system
+super-user can invoke this command by default.
@@ Line 6,337: / Line 9,719: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| remote
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  remote
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| status
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| status
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yuma-system.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yuma-system.yang
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Capabilities needed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Capabilities needed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| none
 |}
@@ Line 6,370: / Line 9,778: @@
 * '''log-level'''
 ** type: enumeration (off, error, warn, info, debug, debug2, debug3)
-** This mandatory parameter specifies the desired server logging verbosity level.
+** This mandatory parameter specifies the desired server logging
+verbosity level.
 Positive Response:
@@ Line 6,380: / Line 9,789: @@
 * An error message will be printed if errors are detected locally.
-* <nowiki>An <rpc-error> message will be printed if the server detected an error.</nowiki>]
+* <nowiki>An <rpc-error> message will be printed if the server detected
+an error.</nowiki>]
-     yangcli [mailto:andy@www.example.com andy@myserver]>''' set-log-level log-level=debug2'''
+     yangcli [mailto:andy@www.example.com andy@myserver]>'''
+set-log-level log-level=debug2'''
      RPC OK Reply 29 for session 10:
@@ Line 6,389: / Line 9,800: @@
 === set-my-session ===
-The''' set-my-session '''command is used to configure the session customization parameters on the server. It is only supported by the '''netconfd''' server.
+The''' set-my-session '''command is used to configure the session
+customization parameters on the server. It is only supported by the
+'''netconfd''' server.
-The session line size and default behavior for the with-defaults parameter can be controlled at this time.
+The session line size and default behavior for the with-defaults
+parameter can be controlled at this time.
-Since all parameters are optional, they need to be entered in the same command line as the command name. Otherwise the '''$$optional''' system variable needs to be set to 'true'. If not, then no parameters will be sent to the server, and no session parameters will be changed.
+Since all parameters are optional, they need to be entered in the same
+command line as the command name. Otherwise the '''$$optional''' system
+variable needs to be set to 'true'. If not, then no parameters will be
+sent to the server, and no session parameters will be changed.
@@ Line 6,400: / Line 9,817: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| remote
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  remote
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 3
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 3
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| status
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| status
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yuma-mysession.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yuma-mysession.yang
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Capabilities needed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Capabilities needed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| none
 |}
@@ Line 6,433: / Line 9,876: @@
 * '''indent'''
 ** type: uint32 (range: 0 .. 9)
-** This parameter specifies the desired number of spaces to indent for each new XML nest level, for the session. If missing, then the indent amount is not changed.
+** This parameter specifies the desired number of spaces to indent for
+each new XML nest level, for the session. If missing, then the indent
+amount is not changed.
 * '''linesize'''
 ** type: uint32 (range: 40 .. 1024)
-** This parameter specifies the desired line length for the session. If missing, then the current line size is not changed.
+** This parameter specifies the desired line length for the session. If
+missing, then the current line size is not changed.
 * '''with-defaults'''
 ** type: enumeration (report-all trim explicit)
-** This parameter specifies the desired default with-defaults filtering behavior for the session. If missing, the current with-defaults behavior is not changed.
+** This parameter specifies the desired default with-defaults filtering
+behavior for the session. If missing, the current with-defaults behavior
+is not changed.
 Positive Response:
@@ Line 6,449: / Line 9,897: @@
 * An error message will be printed if errors are detected locally.
-* <nowiki>An <rpc-error> message will be printed if the server detected an error.</nowiki>]
+* <nowiki>An <rpc-error> message will be printed if the server detected
+an error.</nowiki>]
-     yangcli [mailto:andy@www.example.com andy@myserver]>''' set-my-session \'''
+     yangcli [mailto:andy@www.example.com andy@myserver]>'''
+set-my-session \'''
      '''        --linesize=64 --with-defaults=trim'''
@@ Line 6,459: / Line 9,909: @@
 === sget ===
-The '''sget'''<nowiki> command is used to invoke a NETCONF <get> operation with a subtree filter.</nowiki>
+The '''sget'''<nowiki> command is used to invoke a NETCONF <get>
+operation with a subtree filter.</nowiki>
-A target node is specified (in 1 of 2 ways), and then the data structure is filled in. Only mandatory nodes will be filled in unless the '''$$optional''' system variable is set to 'true'. This step can be skipped completely with the '''nofill''' parameter.
+A target node is specified (in 1 of 2 ways), and then the data structure
+is filled in. Only mandatory nodes will be filled in unless the
+'''$$optional''' system variable is set to 'true'. This step can be
+skipped completely with the '''nofill''' parameter.
-Refer to the '''fill''' command for more details on interactive mode data structure completion.
+Refer to the '''fill''' command for more details on interactive mode
+data structure completion.
 <center>'''sget command'''</center>
@@ Line 6,469: / Line 9,924: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| remote
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  remote
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| target
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| target
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 5
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 5
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| data
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| data
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yangcli.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yangcli.yang
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Capabilities needed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Capabilities needed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Capabilities optional:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| :with-defaults
+#000000;border-right:none;padding:0.0403in;"| Capabilities optional:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| :with-defaults
 |}
@@ Line 6,508: / Line 9,993: @@
 ** usage: mandatory
 ** default: none
-** This parameter specifies the where '''yangcli''' should get the data from, for the <nowiki>subtree filter target of the <get> operation. </nowiki>It is either a user variable or from interactive input at the command line.
+** This parameter specifies the where '''yangcli''' should get the data
+from, for the <nowiki>subtree filter target of the <get> operation.
+</nowiki>It is either a user variable or from interactive input at the
+command line.
 *** '''varref'''
 **** type: string
 **** usage: mandatory
 **** default: none
-**** <nowiki>This parameter specifies the name of the user variable to use for the subtree filter target of the <get> operation. </nowiki>The parameter must exist (e.g., created with the '''fill''' command) or an error message will be printed.
+**** <nowiki>This parameter specifies the name of the user variable to
+use for the subtree filter target of the <get> operation. </nowiki>The
+parameter must exist (e.g., created with the '''fill''' command) or an
+error message will be printed.
 *** '''case from-cli '''(not entered)
 **** '''target'''
@@ Line 6,519: / Line 10,010: @@
 ***** usage: optional (target or urltarget must be present)
 ***** default: none
-***** <nowiki>This parameter specifies the database target node of the <get> operation. This is an </nowiki>'''ncx:schema-instance''' string, so any instance identifier, or absolute path expression, or something in between, is accepted.
+***** <nowiki>This parameter specifies the database target node of the
+<get> operation. This is an </nowiki>'''ncx:schema-instance''' string,
-****** The escape command ('?s') can be used in parameter mode to skip a parameter completely.
+so any instance identifier, or absolute path expression, or something in
-****** Entering the empty string for a parameter will cause a subtree selection node to be created instead of a content match node
+between, is accepted.
+****** The escape command ('?s') can be used in parameter mode to skip a
+parameter completely.
+****** Entering the empty string for a parameter will cause a subtree
+selection node to be created instead of a content match node
 **** '''urltarget'''
 ***** type: string
 ***** usage: optional
 ***** default: none
-***** This parameter specifies the database target node of the get operation. This is an '''UrlPath''' string.
+***** This parameter specifies the database target node of the get
+operation. This is an '''UrlPath''' string.
 **** '''optional'''
 ***** type: empty
 ***** usage: optional
 ***** default: controlled by '''$$optional''' system variable
-***** This parameter controls whether optional nodes within the target will be filled in. It can be used to override the '''$$optional '''system variable, when it is set to 'false'.
+***** This parameter controls whether optional nodes within the target
+will be filled in. It can be used to override the '''$$optional
+'''system variable, when it is set to 'false'.
 **** '''value'''
 ***** type: anyxml
 ***** usage: mandatory
 ***** default: none
+***** This parameter specifies the value that should be used for the
-***** This parameter specifies the value that should be used for the contents of the '''target''' parameter. If it is entered, then the interactive mode prompting for missing parameters will be skipped, if this parameter is complete (or all mandatory nodes present if the '''$$optional''' system variable is 'false'). For example, if the target is a leaf, then specifying this parameter will always cause the interactive prompt mode to be skipped.
+contents of the '''target''' parameter. If it is entered, then the
+interactive mode prompting for missing parameters will be skipped, if
+this parameter is complete (or all mandatory nodes present if the
+'''$$optional''' system variable is 'false'). For example, if the target
+is a leaf, then specifying this parameter will always cause the
+interactive prompt mode to be skipped.
 * '''nofill'''
 ** type: empty
@@ Line 6,543: / Line 10,048: @@
 ** usage: optional
 ** default: none
-** This parameter specifies the that no interactive prompting to fill in the contents of the specified subtree filter target will be done.
+** This parameter specifies the that no interactive prompting to fill in
-*** This causes the entire selected subtree to be requested in the filter.
+the contents of the specified subtree filter target will be done.
+*** This causes the entire selected subtree to be requested in the
-*** yangcli will attempt to figure out if there can be multiple instances of the requested subtree. If not, then '''nofill''' will be the default for that target parameter.
+filter.
+*** yangcli will attempt to figure out if there can be multiple
+instances of the requested subtree. If not, then '''nofill''' will be
+the default for that target parameter.
 * '''with-defaults'''
@@ Line 6,552: / Line 10,061: @@
 ** default: none
 ** capabilities needed: with-defaults
-** <nowiki>This parameter controls how nodes containing only default values are returned in the <rpc-reply>.</nowiki>
+** <nowiki>This parameter controls how nodes containing only default
+values are returned in the <rpc-reply>.</nowiki>
 System Variables:
 * '''$$timeout'''
-** The response timeout interval will be derived from this system variable.
+** The response timeout interval will be derived from this system
+variable.
 * '''$$with-defaults'''
-** <nowiki>The <with-defaults> parameter for the <get> operation will be derived from this system variable.</nowiki>
+** <nowiki>The <with-defaults> parameter for the <get> operation will be
+derived from this system variable.</nowiki>
 Positive Response:
@@ Line 6,568: / Line 10,080: @@
 * An error message will be printed if errors are detected locally.
-* <nowiki>An <rpc-error> message will be printed if the server detected an error.</nowiki>
+* <nowiki>An <rpc-error> message will be printed if the server detected
+an error.</nowiki>
 Output:
@@ Line 6,574: / Line 10,087: @@
 * '''data'''
 ** type: anyxml
-** This element will contain the requested data from the <nowiki><running></nowiki> database or non-config data structures.
+** This element will contain the requested data from the
+<nowiki><running></nowiki> database or non-config data structures.
 Usage:
@@ Line 6,600: / Line 10,114: @@
 === sget-config ===
-The '''sget-config'''<nowiki> command is used to invoke a NETCONF <get-config> operation with a subtree filter.</nowiki>
+The '''sget-config'''<nowiki> command is used to invoke a NETCONF
+<get-config> operation with a subtree filter.</nowiki>
-A target node is specified (in 1 of 2 ways), and then the data structure is filled in. Only mandatory nodes will be filled in unless the '''$$optional''' system variable is set to 'true'. This step can be skipped completely with the '''nofill''' parameter.
+A target node is specified (in 1 of 2 ways), and then the data structure
+is filled in. Only mandatory nodes will be filled in unless the
+'''$$optional''' system variable is set to 'true'. This step can be
+skipped completely with the '''nofill''' parameter.
-Refer to the '''fill''' command for more details on interactive mode data structure completion.
+Refer to the '''fill''' command for more details on interactive mode
+data structure completion.
@@ Line 6,611: / Line 10,130: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| remote
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  remote
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| target
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| target
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 2
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 2
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 6
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 6
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| data
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| data
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yangcli.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yangcli.yang
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Capabilities needed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Capabilities needed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Capabilities optional:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| :candidate:startup:url:with-defaults
+#000000;border-right:none;padding:0.0403in;"| Capabilities optional:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| :candidate:startup:url:with-defaults
 |}
@@ Line 6,650: / Line 10,199: @@
 ** usage: mandatory
 ** default: none
-** This parameter specifies the where '''yangcli''' should get the data from, for the <nowiki>subtree filter target of the <get> operation. </nowiki>It is either a user variable or from interactive input at the command line.
+** This parameter specifies the where '''yangcli''' should get the data
+from, for the <nowiki>subtree filter target of the <get> operation.
+</nowiki>It is either a user variable or from interactive input at the
+command line.
 *** '''varref'''
 **** type: string
 **** usage: mandatory
 **** default: none
-**** <nowiki>This parameter specifies the name of the user variable to use for the subtree filter target of the <get> operation. </nowiki>The parameter must exist (e.g., created with the '''fill''' command) or an error message will be printed.
+**** <nowiki>This parameter specifies the name of the user variable to
+use for the subtree filter target of the <get> operation. </nowiki>The
+parameter must exist (e.g., created with the '''fill''' command) or an
+error message will be printed.
 *** '''case from-cli '''(not entered)
 **** '''target'''
@@ Line 6,661: / Line 10,216: @@
 ***** usage: optional (target or urltarget must be present)
 ***** default: none
-***** <nowiki>This parameter specifies the database target node of the <get> operation. This is an </nowiki>'''ncx:schema-instance''' string, so any instance identifier, or absolute path expression, or something in between, is accepted.
+***** <nowiki>This parameter specifies the database target node of the
+<get> operation. This is an </nowiki>'''ncx:schema-instance''' string,
-****** The escape command ('?s') can be used in parameter mode to skip a parameter completely.
+so any instance identifier, or absolute path expression, or something in
-****** Entering the empty string for a parameter will cause a subtree selection node to be created instead of a content match node
+between, is accepted.
+****** The escape command ('?s') can be used in parameter mode to skip a
+parameter completely.
+****** Entering the empty string for a parameter will cause a subtree
+selection node to be created instead of a content match node
 **** '''urltarget'''
 ***** type: string
 ***** usage: optional
 ***** default: none
-***** This parameter specifies the database target node of the get-config operation. This is an '''UrlPath''' string.
+***** This parameter specifies the database target node of the
+get-config operation. This is an '''UrlPath''' string.
 **** '''optional'''
 ***** type: empty
 ***** usage: optional
 ***** default: controlled by '''$$optional''' system variable
-***** This parameter controls whether optional nodes within the target will be filled in. It can be used to override the '''$$optional '''system variable, when it is set to 'false'.
+***** This parameter controls whether optional nodes within the target
+will be filled in. It can be used to override the '''$$optional
+'''system variable, when it is set to 'false'.
 **** '''value'''
 ***** type: anyxml
 ***** usage: mandatory
 ***** default: none
+***** This parameter specifies the value that should be used for the
-***** This parameter specifies the value that should be used for the contents of the '''target''' parameter. If it is entered, then the interactive mode prompting for missing parameters will be skipped, if this parameter is complete (or all mandatory nodes present if the '''$$optional''' system variable is 'false'). For example, if the target is a leaf, then specifying this parameter will always cause the interactive prompt mode to be skipped.
+contents of the '''target''' parameter. If it is entered, then the
+interactive mode prompting for missing parameters will be skipped, if
+this parameter is complete (or all mandatory nodes present if the
+'''$$optional''' system variable is 'false'). For example, if the target
+is a leaf, then specifying this parameter will always cause the
+interactive prompt mode to be skipped.
 * '''nofill'''
 ** type: empty
@@ Line 6,685: / Line 10,254: @@
 ** usage: optional
 ** default: none
-** This parameter specifies the that no interactive prompting to fill in the contents of the specified subtree filter target will be done.
+** This parameter specifies the that no interactive prompting to fill in
-*** This causes the entire selected subtree to be requested in the filter.
+the contents of the specified subtree filter target will be done.
+*** This causes the entire selected subtree to be requested in the
-*** yangcli will attempt to figure out if there can be multiple instances of the requested subtree. If not, then '''nofill''' will be the default for that target parameter.
+filter.
+*** yangcli will attempt to figure out if there can be multiple
+instances of the requested subtree. If not, then '''nofill''' will be
+the default for that target parameter.
 * '''source'''
@@ Line 6,693: / Line 10,266: @@
 ** usage: mandatory
 ** default: none
-** This parameter specifies the name of the source database for the retrieval operation.
+** This parameter specifies the name of the source database for the
+retrieval operation.
 ** container contents: 1 of N:
 *** '''candidate'''
@@ Line 6,706: / Line 10,280: @@
 *** '''url'''
 **** type: yang:uri
-**** capabilities needed: :url, and the scheme used in the URL must be specified in the :url capability 'schemes' parameter
+**** capabilities needed: :url, and the scheme used in the URL must be
+specified in the :url capability 'schemes' parameter
-**** To enter this parameter, the interactive mode must be used. The shorthand mode (source=url) cannot be used, since this parameter contains a string.
+**** To enter this parameter, the interactive mode must be used. The
+shorthand mode (source=url) cannot be used, since this parameter
+contains a string.
 * '''with-defaults'''
 ** type: enumeration (none report-all report-all-tagged trim explicit)
@@ Line 6,713: / Line 10,290: @@
 ** default: none
 ** capabilities needed: with-defaults
-** <nowiki>This parameter controls how nodes containing only default values are returned in the <rpc-reply>.</nowiki>
+** <nowiki>This parameter controls how nodes containing only default
+values are returned in the <rpc-reply>.</nowiki>
 System Variables:
 * '''$$timeout'''
-** The response timeout interval will be derived from this system variable.
+** The response timeout interval will be derived from this system
+variable.
 * '''$$with-defaults'''
-** <nowiki>The <with-defaults> parameter for the <get-config> operation will be derived from this system variable.</nowiki>
+** <nowiki>The <with-defaults> parameter for the <get-config> operation
+will be derived from this system variable.</nowiki>
 Positive Response:
@@ Line 6,729: / Line 10,309: @@
 * An error message will be printed if errors are detected locally.
-* <nowiki>An <rpc-error> message will be printed if the server detected an error.</nowiki>
+* <nowiki>An <rpc-error> message will be printed if the server detected
+an error.</nowiki>
 Output:
@@ Line 6,735: / Line 10,316: @@
 * '''data'''
 ** type: anyxml
-** This element will contain the requested data from the database indicated by the '''source''' parameter.
+** This element will contain the requested data from the database
+indicated by the '''source''' parameter.
 Usage:
@@ Line 6,773: / Line 10,355: @@
 === show ===
-The '''show''' command is used to show program status and YANG details that may be needed during management of a NETCONF server.
+The '''show''' command is used to show program status and YANG details
+that may be needed during management of a NETCONF server.
 There are several variants of the '''show''' command:
-* The '''show cli''' command prints the contents of the yangcli CLI and config file parameters.
+* The '''show cli''' command prints the contents of the yangcli CLI and
+config file parameters.
-* The '''show global''' command prints the contents of one global user variable.
-* The''' show globals '''command prints a summary or the contents of all the global user variables.
+* The '''show global''' command prints the contents of one global user
+variable.
-* The '''show local''' command prints the contents of one local user variable.
-* The''' show locals '''command prints a summary or the contents of all the local user variables.
+* The''' show globals '''command prints a summary or the contents of all
+the global user variables.
-* The '''show module''' command prints meta information or help text for one YANG module.
+* The '''show local''' command prints the contents of one local user
-* The''' show modules '''command prints meta information for all the currently available YANG modules. IF a session is active, this will be the list of modules the server reported, plus any modules loaded with the '''mgrload''' command.
+variable.
-* The '''show objects''' command prints the available objects or help text for the available objects.
-* The '''show session''' command prints the session startup screen information for the current session.
+* The''' show locals '''command prints a summary or the contents of all
+the local user variables.
-* The '''show system''' command prints the contents of the yangcli system variables.
-* The '''show var''' command prints the contents of the specified variable.
+* The '''show module''' command prints meta information or help text for
+one YANG module.
-* The''' show vars''' command prints a summary or the contents of all the program variables.
+* The''' show modules '''command prints meta information for all the
+currently available YANG modules. IF a session is active, this will be
+the list of modules the server reported, plus any modules loaded with
+the '''mgrload''' command.
+* The '''show objects''' command prints the available objects or help
+text for the available objects.
+* The '''show session''' command prints the session startup screen
+information for the current session.
+* The '''show system''' command prints the contents of the yangcli
+system variables.
+* The '''show var''' command prints the contents of the specified
+variable.
+* The''' show vars''' command prints a summary or the contents of all
+the program variables.
 * The '''show version''' command prints the '''yangcli''' version number
@@ Line 6,795: / Line 10,392: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| local
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  local
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 2
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 2
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| data
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| data
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yangcli.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yangcli.yang
 |}
@@ Line 6,827: / Line 10,446: @@
 *** usage: optional
 *** default: none
-*** This parameter specifies that brief documentation mode should be used.
+*** This parameter specifies that brief documentation mode should be
+used.
 ** '''normal'''
 *** type: empty
 *** usage: optional
 *** default: none
-*** This parameter specifies that normal documentation mode should be used.
+*** This parameter specifies that normal documentation mode should be
+used.
 ** '''full'''
 *** type: empty
 *** usage: optional
 *** default: none
-*** This parameter specifies that full documentation mode should be used.
+*** This parameter specifies that full documentation mode should be
+used.
 * '''choice showtype''' (not entered)
-** mandatory 1 of N choice for the sub-command for the '''show''' command
+** mandatory 1 of N choice for the sub-command for the '''show'''
+command
 *** '''cli'''
 **** type: empty
@@ Line 6,851: / Line 10,474: @@
 **** usage: mandatory
 **** default: none
-**** This parameter specifies the name of the global variable to show information for.
+**** This parameter specifies the name of the global variable to show
+information for.
-***** If '''help-mode '''is 'brief', then the name, variable object, and type of the global variable object will be printed.
-***** If '''help-mode''' is 'normal' or 'full', then the contents of the specified global variable will be printed.
+***** If '''help-mode '''is 'brief', then the name, variable object, and
+type of the global variable object will be printed.
+***** If '''help-mode''' is 'normal' or 'full', then the contents of the
+specified global variable will be printed.
 *** '''globals'''
 **** type: empty
 **** usage: mandatory
 **** default: none
-**** This parameter specifies that information for all global variables should be printed.
+**** This parameter specifies that information for all global variables
+should be printed.
-***** If '''help-mode '''is 'brief', then the name, variable object, and type of each global variable object will be printed.
-***** If '''help-mode''' is 'normal' or 'full', then the contents of each global variable will be printed.
+***** If '''help-mode '''is 'brief', then the name, variable object, and
+type of each global variable object will be printed.
+***** If '''help-mode''' is 'normal' or 'full', then the contents of
+each global variable will be printed.
 *** '''local'''
 **** type: string
 **** usage: mandatory
 **** default: none
-**** This parameter specifies the name of the local variable to show information for.
+**** This parameter specifies the name of the local variable to show
+information for.
-***** If '''help-mode '''is 'brief', then the name, variable object, and type of the local variable object will be printed.
-***** If '''help-mode''' is 'normal' or 'full', then the contents of the specified local variable will be printed.
+***** If '''help-mode '''is 'brief', then the name, variable object, and
+type of the local variable object will be printed.
+***** If '''help-mode''' is 'normal' or 'full', then the contents of the
+specified local variable will be printed.
 *** '''locals'''
 **** type: empty
 **** usage: mandatory
 **** default: none
-**** This parameter specifies that information for all local variables should be printed.
+**** This parameter specifies that information for all local variables
+should be printed.
-***** If '''help-mode '''is 'brief', then the name, variable object, and type of each local variable object will be printed.
-***** If '''help-mode''' is 'normal' or 'full', then the contents of each local variable will be printed.
+***** If '''help-mode '''is 'brief', then the name, variable object, and
+type of each local variable object will be printed.
+***** If '''help-mode''' is 'normal' or 'full', then the contents of
+each local variable will be printed.
 *** '''module'''
 **** type: string
 **** usage: mandatory
 **** default: none
-**** This parameter specifies the name of the module to show information for.
+**** This parameter specifies the name of the module to show information
+for.
-***** If '''help-mode '''is 'brief' or 'normal', then the name, version, namespace, and source of the module will be printed.
-***** If '''help-mode''' is 'full', then the module level help text for the specified module will be printed.
+***** If '''help-mode '''is 'brief' or 'normal', then the name, version,
+namespace, and source of the module will be printed.
+***** If '''help-mode''' is 'full', then the module level help text for
+the specified module will be printed.
 *** '''modules'''
 **** type: empty
 **** usage: mandatory
 **** default: none
-**** This parameter specifies that information for all available modules should be printed:
+**** This parameter specifies that information for all available modules
+should be printed:
-***** If '''help-mode '''is 'brief', then the name of each module will be printed.
-***** If '''help-mode '''is 'normal', then the XML prefix, name, and revision date of each module will be printed.
+***** If '''help-mode '''is 'brief', then the name of each module will
+be printed.
-***** If '''help-mode''' is 'full', then the name, revision date, prefix, namespace, and source of each module will be printed.
+***** If '''help-mode '''is 'normal', then the XML prefix, name, and
+revision date of each module will be printed.
+***** If '''help-mode''' is 'full', then the name, revision date,
+prefix, namespace, and source of each module will be printed.
 *** '''objects'''
 **** type: empty
 **** usage: mandatory
 **** default: none
-**** This parameter specifies that information for all available database objects should be printed:
+**** This parameter specifies that information for all available
+database objects should be printed:
-***** If '''help-mode '''is 'brief', then the module name and name of each object will be printed.
-***** If '''help-mode '''is 'normal', then the YANG object type, object name, and YANG base type will be printed.<br/> If '''help-mode''' is 'full', then brief help text will be printed for every object.
+***** If '''help-mode '''is 'brief', then the module name and name of
+each object will be printed.
+***** If '''help-mode '''is 'normal', then the YANG object type, object
+name, and YANG base type will be printed.<br/> If '''help-mode''' is
+'full', then brief help text will be printed for every object.
 *** '''system'''
 **** type: empty
 **** usage: mandatory
 **** default: none
-**** This parameter specifies that information for all system variables should be printed.
+**** This parameter specifies that information for all system variables
+should be printed.
 ***** The '''help-mode '''parameter''' '''has no affect on this command.
 *** '''var'''
@@ Line 6,907: / Line 10,554: @@
 **** usage: mandatory
 **** default: none
-**** This parameter specifies the name of any variable to show information for.
+**** This parameter specifies the name of any variable to show
+information for.
-***** If '''help-mode '''is 'brief', then the name, variable object, and type of the variable object will be printed.
-***** If '''help-mode''' is 'normal' or 'full', then the contents of the specified variable will be printed.
+***** If '''help-mode '''is 'brief', then the name, variable object, and
+type of the variable object will be printed.
+***** If '''help-mode''' is 'normal' or 'full', then the contents of the
+specified variable will be printed.
 *** '''vars'''
 **** type: empty
 **** usage: mandatory
 **** default: none
-**** This parameter specifies that information for all variables should be printed. This includes all CLI, read-only system, read-write system, global user, and local user variables.
+**** This parameter specifies that information for all variables should
+be printed. This includes all CLI, read-only system, read-write system,
-***** If '''help-mode '''is 'brief', then the name, variable object, and type of each variable object will be printed.
+global user, and local user variables.
-***** If '''help-mode''' is 'normal' or 'full', then the contents of each variable will be printed.
+***** If '''help-mode '''is 'brief', then the name, variable object, and
+type of each variable object will be printed.
+***** If '''help-mode''' is 'normal' or 'full', then the contents of
+each variable will be printed.
 *** '''version'''
 **** type: empty
 **** usage: mandatory
 **** default: none
-**** This parameter specifies that the yangcli program version string should be printed.
+**** This parameter specifies that the yangcli program version string
+should be printed.
 ***** The '''help-mode''' parameter has no affect in this mode.
@@ Line 6,959: / Line 10,614: @@
 This command is only supported by the '''netconfd''' server.
-The default access control configuration for '''netconfd''' will not allow any user except the designated 'superuser' account to invoke this command. Refer to the '''netconfd''' user manual for details on configuring access control.
+The default access control configuration for '''netconfd''' will not
+allow any user except the designated 'superuser' account to invoke this
+command. Refer to the '''netconfd''' user manual for details on
+configuring access control.
@@ Line 6,966: / Line 10,624: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| remote
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  remote
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| status
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| status
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yuma-system.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yuma-system.yang
 |}
@@ Line 6,998: / Line 10,678: @@
 * An error message will be printed if errors are detected locally.
-* <nowiki>An <rpc-error> message will be printed if the server detected an error.</nowiki>
+* <nowiki>An <rpc-error> message will be printed if the server detected
+an error.</nowiki>
 Usage:
@@ Line 7,010: / Line 10,691: @@
 === start-timer ===
-The '''start-timer''' command is used to start a timer to do simple performance measurements.
+The '''start-timer''' command is used to start a timer to do simple
+performance measurements.
 It is used along with the stop-timer command.
@@ Line 7,019: / Line 10,701: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| local
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  local
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| id
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| id
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 2
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 2
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| status
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| status
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yangcli.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yangcli.yang
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Capabilities needed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Capabilities needed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Capabilities optional:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Capabilities optional:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| none
 |}
@@ Line 7,058: / Line 10,770: @@
 ** usage: mandatory
 ** default: 0
-** This parameter specifies the numeric ID of the timer.It is a number in the range 0 to 15.
+** This parameter specifies the numeric ID of the timer.It is a number
+in the range 0 to 15.
 * '''restart-ok'''
 ** type: boolean
 ** usage: optional
 ** default: true
-** Indicates whether the timer will be used if it is already running. If 'true', the timer will be restarted if it is already running. If 'false', an error will occur if the timer is already running.
+** Indicates whether the timer will be used if it is already running. If
+'true', the timer will be restarted if it is already running. If
+'false', an error will occur if the timer is already running.
 **
@@ Line 7,083: / Line 10,798: @@
 === stop-timer ===
-The '''stop-timer''' command is used to stop a timer to do simple performance measurements.
+The '''stop-timer''' command is used to stop a timer to do simple
+performance measurements.
 It is used along with the start-timer command.
@@ Line 7,092: / Line 10,808: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| local
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  local
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| id
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| id
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 2
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 2
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| data
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| data
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yangcli.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yangcli.yang
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Capabilities needed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Capabilities needed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Capabilities optional:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Capabilities optional:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| none
 |}
@@ Line 7,131: / Line 10,877: @@
 ** usage: mandatory
 ** default: 0
-** This parameter specifies the numeric ID of the timer.It is a number in the range 0 to 15.
+** This parameter specifies the numeric ID of the timer.It is a number
+in the range 0 to 15.
 * '''echo'''
 ** type: boolean
@@ Line 7,140: / Line 10,887: @@
 Positive Response:
-* data: the elapsed time is returned and can be used in assignment statements
+* data: the elapsed time is returned and can be used in assignment
+statements
 Negative Response:
@@ Line 7,155: / Line 10,903: @@
 === unlock ===
-The '''unlock''' command is used to request a global lock on a NETCONF database. It is used, along with the '''lock''' command, to obtain exclusive write access to the NETCONF server.
+The '''unlock''' command is used to request a global lock on a NETCONF
+database. It is used, along with the '''lock''' command, to obtain
+exclusive write access to the NETCONF server.
@@ Line 7,162: / Line 10,912: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| remote
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  remote
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| status
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| status
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yuma-netconf.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yuma-netconf.yang
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Capabilities needed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Capabilities needed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Capabilities optional:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| :candidate:startup:url
+#000000;border-right:none;padding:0.0403in;"| Capabilities optional:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| :candidate:startup:url
 |}
@@ Line 7,201: / Line 10,981: @@
 ** usage: mandatory
 ** default: none
-** This parameter specifies the name of the target database to be locked.
+** This parameter specifies the name of the target database to be
+locked.
 ** container contents: 1 of N:
 *** '''candidate'''
@@ Line 7,214: / Line 10,995: @@
 *** '''url'''
 **** type: yang:uri
-**** capabilities needed: :url, and the scheme used in the URL must be specified in the :url capability 'schemes' parameter.
+**** capabilities needed: :url, and the scheme used in the URL must be
+specified in the :url capability 'schemes' parameter.
-**** To enter this parameter, the interactive mode must be used. The shorthand mode (target=url) cannot be used, since this parameter contains a string.
+**** To enter this parameter, the interactive mode must be used. The
+shorthand mode (target=url) cannot be used, since this parameter
+contains a string.
 Positive Response:
@@ Line 7,224: / Line 11,008: @@
 * An error message will be printed if errors are detected locally.
-* <nowiki>An <rpc-error> message will be printed if the server detected an error.</nowiki>
+* <nowiki>An <rpc-error> message will be printed if the server detected
+an error.</nowiki>
 Usage:
@@ Line 7,243: / Line 11,028: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| local
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  local
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| name
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| name
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| status
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| status
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yangcli.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yangcli.yang
 |}
@@ Line 7,278: / Line 11,085: @@
 Positive Response:
-* Deleted alias 'foo' is printed, where 'foo' is the name parameter string
+* Deleted alias 'foo' is printed, where 'foo' is the name parameter
+string
 Negative Response:
 * An error message will be printed.
-* <nowiki>An <rpc-error> message will be printed if the server detected an error.</nowiki>
+* <nowiki>An <rpc-error> message will be printed if the server detected
+an error.</nowiki>
 Usage:
@@ Line 7,296: / Line 11,105: @@
 === uservars ===
-The '''uservars''' command is used to clear, load, or save the global user variables.
+The '''uservars''' command is used to clear, load, or save the global
+user variables.
@@ Line 7,303: / Line 11,113: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| local
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  local
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| status
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| status
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yangcli.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yangcli.yang
 |}
@@ Line 7,337: / Line 11,169: @@
 *** Delete all global user variables from memory
 ** '''load'''<nowiki> [uservars-filespec]</nowiki>
-*** Load global user variables into memory from an XML file.If the 'uservars-filespec' parameter is missing, then the default file($HOME/.yuma/yangcli_uservars.xml) will be used.
+*** Load global user variables into memory from an XML file.If the
+'uservars-filespec' parameter is missing, then the default
+file($HOME/.yuma/yangcli_uservars.xml) will be used.
 ** '''save'''<nowiki> [uservars-filespec]</nowiki>
-*** Save the global user variables from memory into an XML file.If the 'uservars-filespec' parameter is missing, then the default file($HOME/.yuma/yangcli_uservars.xml) will be used.
+*** Save the global user variables from memory into an XML file.If the
+'uservars-filespec' parameter is missing, then the default
+file($HOME/.yuma/yangcli_uservars.xml) will be used.
 Positive Response:
@@ Line 7,359: / Line 11,195: @@
 === validate ===
-The '''validate''' command is used to check if a complete NETCONF database is valid or not.
+The '''validate''' command is used to check if a complete NETCONF
+database is valid or not.
-The''' :validate '''capability must be supported by the server to use this command.
+The''' :validate '''capability must be supported by the server to use
+this command.
@@ Line 7,368: / Line 11,206: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| remote
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  remote
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| status
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| status
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yuma-netconf.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yuma-netconf.yang
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Capabilities needed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| :validate
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Capabilities needed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| :validate
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Capabilities optional:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| :candidate:startup:url
+#000000;border-right:none;padding:0.0403in;"| Capabilities optional:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| :candidate:startup:url
 |}
@@ Line 7,407: / Line 11,275: @@
 ** usage: mandatory
 ** default: none
-** This parameter specifies the name of the target database to be validated.
+** This parameter specifies the name of the target database to be
+validated.
 ** container contents: 1 of N:
 *** '''candidate'''
@@ Line 7,420: / Line 11,289: @@
 *** '''url'''
 **** type: yang:uri
-**** capabilities needed: :url, and the scheme used in the URL must be specified in the :url capability 'schemes' parameter.
+**** capabilities needed: :url, and the scheme used in the URL must be
+specified in the :url capability 'schemes' parameter.
-**** To enter this parameter, the interactive mode must be used. The shorthand mode (target=url) cannot be used, since this parameter contains a string.
+**** To enter this parameter, the interactive mode must be used. The
+shorthand mode (target=url) cannot be used, since this parameter
+contains a string.
 *** '''config'''
 **** type: anyxml
 **** capabilities
-**** This parameter represents an entire database, using the in-line config form, similar to the '''edit-config '''command, except this config parameter contains no nc:operation attributes and must be a complete database, not a subset.
+**** This parameter represents an entire database, using the in-line
+config form, similar to the '''edit-config '''command, except this
+config parameter contains no nc:operation attributes and must be a
+complete database, not a subset.
 Positive Response:
@@ Line 7,434: / Line 11,309: @@
 * An error message will be printed if errors are detected locally.
-* <nowiki>An <rpc-error> message will be printed if the server detected an error.</nowiki>
+* <nowiki>An <rpc-error> message will be printed if the server detected
+an error.</nowiki>
 Usage:
@@ Line 7,446: / Line 11,322: @@
 === while ===
-The '''while''' command is used to start a conditional loop command block.
+The '''while''' command is used to start a conditional loop command
+block.
+The '''expr''' parameter is used to specify the XPath expression to test
-The '''expr''' parameter is used to specify the XPath expression to test if the while conditional loop block is true or false. A false block will be skipped and a true block will be executed. <nowiki>The command prompt will contain the string '[F]' while </nowiki>inside a false conditional block in interactive mode. This expression string should be entered with quotes to avoid misinterpreting any whitespace or special characters.
+if the while conditional loop block is true or false. A false block will
+be skipped and a true block will be executed. <nowiki>The command prompt
+will contain the string '[F]' while </nowiki>inside a false conditional
+block in interactive mode. This expression string should be entered with
+quotes to avoid misinterpreting any whitespace or special characters.
-The '''docroot''' parameter (if present) specifies the XML document that the 'expr' parameter should be evaluated against. This is optional, since only XPath path expressions need to refer to a document.
+The '''docroot''' parameter (if present) specifies the XML document that
+the 'expr' parameter should be evaluated against. This is optional,
+since only XPath path expressions need to refer to a document.
-If the 'expr' expression is true, the conditional block will be executed, and no further conditional blocks within the same if command sequence will be executed.
+If the 'expr' expression is true, the conditional block will be
+executed, and no further conditional blocks within the same if command
+sequence will be executed.
-The maxloops parameter specifies the maximum number of iterations that should be allowed, even if the expression continues to evaluate to 'true'. This allows constant expressions to be used to construct a simple 'for' loop.
+The maxloops parameter specifies the maximum number of iterations that
+should be allowed, even if the expression continues to evaluate to
+'true'. This allows constant expressions to be used to construct a
+simple 'for' loop.
@@ Line 7,467: / Line 11,356: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| local
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  local
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| expr
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| expr
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 3
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 3
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| status
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| status
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yangcli.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yangcli.yang
 |}
@@ Line 7,498: / Line 11,409: @@
 ** usage: mandatory
 ** default: none
-** This parameter specifies the XPath expression to determine if the following commands are within a true or false conditional block.
+** This parameter specifies the XPath expression to determine if the
+following commands are within a true or false conditional block.
 * '''docroot'''
 ** type: anyxml
 ** usage: optional (typically a variable reference is used)
 ** default: none
-** This parameter specifies the XML document that should be used if the expr XPath expression references any path nodes.
+** This parameter specifies the XML document that should be used if the
+expr XPath expression references any path nodes.
 * '''maxloops'''
 ** type: uint32
 ** usage: optional
 ** default: 65535
-** Set a maximum number of loops that can be iterated for this while command. The value zero means that no maximum will be enforced. Use this mode with caution.
+** Set a maximum number of loops that can be iterated for this while
+command. The value zero means that no maximum will be enforced. Use this
+mode with caution.
 Positive Response:
@@ Line 7,517: / Line 11,432: @@
 * An error message will be printed if errors are detected locally.
-** invalid XPath expression or invalid docroot reference will cause an error
+** invalid XPath expression or invalid docroot reference will cause an
+error
 Usage:
@@ Line 7,524: / Line 11,440: @@
      yangcli andy@myserver> '''while 1 --maxloops=10'''
-     yangcli [mailto:andy@myagent andy@myserver]>'''<nowiki> while '$x < 10'</nowiki>'''
+     yangcli [mailto:andy@myagent andy@myserver]>'''<nowiki> while '$x <
+'</nowiki>'''
      yangcli [mailto:andy@myagent andy@myserver]>
@@ Line 7,530: / Line 11,447: @@
 === xget ===
-The '''xget'''<nowiki> command is used to invoke a NETCONF <get> operation with an XPath filter.</nowiki>
+The '''xget'''<nowiki> command is used to invoke a NETCONF <get>
+operation with an XPath filter.</nowiki>
@@ Line 7,537: / Line 11,455: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| remote
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  remote
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| select
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| select
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 3
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 3
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| data
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| data
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yangcli.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yangcli.yang
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Capabilities needed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Capabilities needed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Capabilities optional:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| :with-defaults
+#000000;border-right:none;padding:0.0403in;"| Capabilities optional:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| :with-defaults
 |}
@@ Line 7,576: / Line 11,524: @@
 ** usage: mandatory
 ** default: none
-** This parameter specifies the where '''yangcli'''<nowiki> should get the data from, for the XPath filter target of the <get> operation. </nowiki>It is an XPath expression, either contained in a user variable or directly from the '''select''' parameter.
+** This parameter specifies the where '''yangcli'''<nowiki> should get
+the data from, for the XPath filter target of the <get> operation.
+</nowiki>It is an XPath expression, either contained in a user variable
+or directly from the '''select''' parameter.
 *** '''varref'''
 **** type: string
 **** usage: mandatory
 **** default: none
-**** <nowiki>This parameter specifies the name of the user variable the contains the XPath expression for the XPath filter in the <get> operation. </nowiki>The parameter must exist (e.g., created with an assignment statement) or an error message will be printed.
+**** <nowiki>This parameter specifies the name of the user variable the
+contains the XPath expression for the XPath filter in the <get>
+operation. </nowiki>The parameter must exist (e.g., created with an
+assignment statement) or an error message will be printed.
 *** '''select'''
 **** type: string
 **** usage: mandatory
 **** default: none
-**** <nowiki>This parameter specifies the XPath expression to use for the XPath filter in the <get> operation.</nowiki>
+**** <nowiki>This parameter specifies the XPath expression to use for
+the XPath filter in the <get> operation.</nowiki>
 * '''timeout'''
-** type: uint32 (0 = no timeout, otherwise the number of seconds to wait)
+** type: uint32 (0 = no timeout, otherwise the number of seconds to
+wait)
 *
 ** usage: optional
-** default: set to the '''$$timeout''' system variable, default 30 seconds
+** default: set to the '''$$timeout''' system variable, default 30
+seconds
-** This parameter specifies the number of seconds to wait for a response from the server before giving up. The session will not be dropped if a remote command times out, but any late response will be dropped. A value of zero means no timeout should be used, and '''yangcli''' will wait forever for a response.
+** This parameter specifies the number of seconds to wait for a response
+from the server before giving up. The session will not be dropped if a
+remote command times out, but any late response will be dropped. A value
+of zero means no timeout should be used, and '''yangcli''' will wait
+forever for a response.
 * '''with-defaults'''
@@ Line 7,600: / Line 11,561: @@
 ** default: none
 ** capabilities needed: with-defaults
-** <nowiki>This parameter controls how nodes containing only default values are returned in the <rpc-reply>.</nowiki>
+** <nowiki>This parameter controls how nodes containing only default
+values are returned in the <rpc-reply>.</nowiki>
 System Variables:
 * '''$$timeout'''
-** The response timeout interval will be derived from this system variable.
+** The response timeout interval will be derived from this system
+variable.
 * '''$$with-defaults'''
-** <nowiki>The <with-defaults> parameter for the <get> operation will be derived from this system variable.</nowiki>
+** <nowiki>The <with-defaults> parameter for the <get> operation will be
+derived from this system variable.</nowiki>
 Positive Response:
@@ Line 7,616: / Line 11,580: @@
 * An error message will be printed if errors are detected locally.
-* <nowiki>An <rpc-error> message will be printed if the server detected an error.</nowiki>
+* <nowiki>An <rpc-error> message will be printed if the server detected
+an error.</nowiki>
 Output:
@@ Line 7,622: / Line 11,587: @@
 * '''data'''
 ** type: anyxml
-** This element will contain the requested data from the <nowiki><running></nowiki> database or non-config data structures.
+** This element will contain the requested data from the
+<nowiki><running></nowiki> database or non-config data structures.
 Usage:
@@ Line 7,669: / Line 11,635: @@
 === xget-config ===
-The '''xget-config'''<nowiki> command is used to invoke a NETCONF <get-config> operation with an XPath filter.</nowiki>
+The '''xget-config'''<nowiki> command is used to invoke a NETCONF
+<get-config> operation with an XPath filter.</nowiki>
@@ Line 7,676: / Line 11,643: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Command type:
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0403in;"| remote
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Command type:
+|  remote
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| select
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Default parameter:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| select
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 2
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Min parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 2
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| 4
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Max parameters:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| 4
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| data
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Return type:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| data
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| yangcli.yang
+#000000;border-right:none;padding:0.0403in;"| YANG file:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| yangcli.yang
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Capabilities needed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0403in;"| Capabilities needed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0403in;"| Capabilities optional:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0403in;"| :candidate:startup:url:with-defaults
+#000000;border-right:none;padding:0.0403in;"| Capabilities optional:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0403in;"| :candidate:startup:url:with-defaults
 |}
@@ Line 7,715: / Line 11,712: @@
 ** usage: mandatory
 ** default: none
-** This parameter specifies the where '''yangcli'''<nowiki> should get the data from, for the XPath filter target of the <get-config> operation. </nowiki>It is an XPath expression, either contained in a user variable or directly from the '''select''' parameter.
+** This parameter specifies the where '''yangcli'''<nowiki> should get
+the data from, for the XPath filter target of the <get-config>
+operation. </nowiki>It is an XPath expression, either contained in a
+user variable or directly from the '''select''' parameter.
 *** '''varref'''
 **** type: string
 **** usage: mandatory
 **** default: none
-**** <nowiki>This parameter specifies the name of the user variable the contains the XPath expression for the XPath filter in the <get-config> operation. </nowiki>The parameter must exist (e.g., created with an assignment statement) or an error message will be printed.
+**** <nowiki>This parameter specifies the name of the user variable the
+contains the XPath expression for the XPath filter in the <get-config>
+operation. </nowiki>The parameter must exist (e.g., created with an
+assignment statement) or an error message will be printed.
 *** '''select'''
 **** type: string
 **** usage: mandatory
 **** default: none
-**** <nowiki>This parameter specifies the XPath expression to use for the XPath filter in the <get-config> operation.</nowiki>
+**** <nowiki>This parameter specifies the XPath expression to use for
+the XPath filter in the <get-config> operation.</nowiki>
 * '''source'''
 ** type: container with 1 of N choice of leafs
 ** usage: mandatory
 ** default: none
-** This parameter specifies the name of the source database for the retrieval operation.
+** This parameter specifies the name of the source database for the
+retrieval operation.
 ** container contents: 1 of N:
 *** '''candidate'''
@@ Line 7,743: / Line 11,748: @@
 *** '''url'''
 **** type: yang:uri
-**** capabilities needed: :url, and the scheme used in the URL must be specified in the :url capability 'schemes' parameter
+**** capabilities needed: :url, and the scheme used in the URL must be
+specified in the :url capability 'schemes' parameter
-**** To enter this parameter, the interactive mode must be used. The shorthand mode (source=url) cannot be used, since this parameter contains a string.
+**** To enter this parameter, the interactive mode must be used. The
+shorthand mode (source=url) cannot be used, since this parameter
+contains a string.
 * '''timeout'''
-** type: uint32 (0 = no timeout, otherwise the number of seconds to wait)
+** type: uint32 (0 = no timeout, otherwise the number of seconds to
+wait)
 *
 ** usage: optional
-** default: set to the '''$$timeout''' system variable, default 30 seconds
+** default: set to the '''$$timeout''' system variable, default 30
+seconds
-** This parameter specifies the number of seconds to wait for a response from the server before giving up. The session will not be dropped if a remote command times out, but any late response will be dropped. A value of zero means no timeout should be used, and '''yangcli''' will wait forever for a response.
+** This parameter specifies the number of seconds to wait for a response
+from the server before giving up. The session will not be dropped if a
+remote command times out, but any late response will be dropped. A value
+of zero means no timeout should be used, and '''yangcli''' will wait
+forever for a response.
 * '''with-defaults'''
@@ Line 7,758: / Line 11,772: @@
 ** default: none
 ** capabilities needed: with-defaults
-** <nowiki>This parameter controls how nodes containing only default values are returned in the <rpc-reply>.</nowiki>
+** <nowiki>This parameter controls how nodes containing only default
+values are returned in the <rpc-reply>.</nowiki>
 System Variables:
 * '''$$timeout'''
-** The response timeout interval will be derived from this system variable.
+** The response timeout interval will be derived from this system
+variable.
 * '''$$with-defaults'''
-** <nowiki>The <with-defaults> parameter for the <get-config> operation will be derived from this system variable.</nowiki>
+** <nowiki>The <with-defaults> parameter for the <get-config> operation
+will be derived from this system variable.</nowiki>
 Positive Response:
@@ Line 7,774: / Line 11,791: @@
 * An error message will be printed if errors are detected locally.
-* <nowiki>An <rpc-error> message will be printed if the server detected an error.</nowiki>
+* <nowiki>An <rpc-error> message will be printed if the server detected
+an error.</nowiki>
 Output:
@@ Line 7,780: / Line 11,798: @@
 * '''data'''
 ** type: anyxml
-** This element will contain the requested data from the '''source''' database.
+** This element will contain the requested data from the '''source'''
+database.
 Usage:
@@ Line 7,812: / Line 11,831: @@
 = CLI Reference =
-The Yuma programs uses command line interface (CLI) parameters to control program behavior.
+The Yuma programs uses command line interface (CLI) parameters to
+control program behavior.
-Many parameters are supported by more than one program, such as''' --log.'''
+Many parameters are supported by more than one program, such as'''
+--log.'''
-The following sections document all the Yuma CLI parameters, in alphabetical order.
+The following sections document all the Yuma CLI parameters, in
+alphabetical order.
 == --aliases-file ==
-The –'''aliases-file''' parameter specifies the yangcli command aliases file specification to use.
+The –'''aliases-file''' parameter specifies the yangcli command aliases
+file specification to use.
@@ Line 7,826: / Line 11,849: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Syntax
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| string
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Syntax
+|  string
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| $HOME/.yuma/.yangcli_aliases
+#000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| $HOME/.yuma/.yangcli_aliases
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| yangcli
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| yangcli
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"|  yangcli –aliases-file=~/myalaises
+#000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"|  yangcli –aliases-file=~/myalaises
 |}
 == --alt-names ==
-The –'''alt-names''' parameter controls whether alternative names are searched when processing a UrlPath search.
+The –'''alt-names''' parameter controls whether alternative names are
+searched when processing a UrlPath search.
@@ Line 7,859: / Line 11,905: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Syntax
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| boolean (true or false)
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Syntax
+|  boolean (true or
+false)
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| TRUE
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| TRUE
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| yangcli
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| yangcli
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"|  yangcli --alt-names=false
+#000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"|  yangcli --alt-names=false
 |}
 == --autoaliases ==
-The '''--autoaliases''' parameter controls automatic loading and saving of the command aliases file.
+The '''--autoaliases''' parameter controls automatic loading and saving
+of the command aliases file.
 If 'true', then aliases will be loaded and saved automatically.
-If 'false', then aliases must be loaded and saved manually with the 'aliases' command.
+If 'false', then aliases must be loaded and saved manually with the
+'aliases' command.
@@ Line 7,896: / Line 11,967: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Syntax
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| boolean (true or false)
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Syntax
+|  boolean (true or
+false)
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| TRUE
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| TRUE
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| yangcli
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| yangcli
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"|  yangcli --autoaliases=false
+#000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"|  yangcli --autoaliases=false
 |}
 == --autocomp ==
-The '''--autocomp''' parameter controls automatic completion of command and parameter names.
+The '''--autocomp''' parameter controls automatic completion of command
+and parameter names.
-If true, then the program will attempt to find a partial match by comparing only the number of characters entered. For example '--log-l=debug' is the same as '--log-level=debug'.
+If true, then the program will attempt to find a partial match by
+comparing only the number of characters entered. For example
+'--log-l=debug' is the same as '--log-level=debug'.
 If 'false', then command and parameter names must match exactly.
@@ Line 7,932: / Line 12,029: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Syntax
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| boolean (true or false)
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Syntax
+|  boolean (true or
+false)
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| TRUE
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| TRUE
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| yangcli
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| yangcli
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"|  yangcli --autocomp=false
+#000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"|  yangcli --autocomp=false
 |}
 == --autohistory ==
-The '''--autohistory''' parameter controls automatic loading and saving of the command line history buffer in the '''yangcli''' program..
+The '''--autohistory''' parameter controls automatic loading and saving
+of the command line history buffer in the '''yangcli''' program..
-If true, then when the program starts, the default command line history buffer will be loaded, and the previous set of commands will be available with the '''history''' and '''recall''' commands.
+If true, then when the program starts, the default command line history
+buffer will be loaded, and the previous set of commands will be
+available with the '''history''' and '''recall''' commands.
-If 'false', then the command line history buffer will not be loaded and saved automatically.
+If 'false', then the command line history buffer will not be loaded and
+saved automatically.
 The default location for this file is ~/.yuma/.yangcli_history.
@@ Line 7,970: / Line 12,094: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Syntax
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| boolean (true or false)
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Syntax
+|  boolean (true or
+false)
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| TRUE
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| TRUE
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| yangcli
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| yangcli
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"|  yangcli --autohistory=false
+#000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"|  yangcli --autohistory=false
 |}
 == --autoload ==
-The '''--autoload''' parameter controls automatic loading of YANG modules, as needed.
+The '''--autoload''' parameter controls automatic loading of YANG
+modules, as needed.
 If true, then the program will attempt to find a needed YANG module.
@@ Line 8,007: / Line 12,155: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Syntax
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| boolean (true or false)
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Syntax
+|  boolean (true or
+false)
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| TRUE
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| TRUE
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| yangcli
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| yangcli
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"|  yangcli --autoload=false
+#000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"|  yangcli --autoload=false
 |}
 == --autouservars ==
-The '''--autouservars''' parameter controls automatic loading of global user variables.
+The '''--autouservars''' parameter controls automatic loading of global
+user variables.
-If 'true', then the global user variables will be automatically loaded and saved.
+If 'true', then the global user variables will be automatically loaded
+and saved.
-If 'false', then the global user variables must be loaded and saved manually with the 'uservars' command.
+If 'false', then the global user variables must be loaded and saved
+manually with the 'uservars' command.
@@ Line 8,044: / Line 12,218: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Syntax
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| boolean (true or false)
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Syntax
+|  boolean (true or
+false)
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| TRUE
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| TRUE
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| yangcli
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| yangcli
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"|  yangcli --autouservars=false
+#000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"|  yangcli --autouservars=false
 |}
 == --bad-data ==
-The''' --bad-data''' parameter controls how invalid parameter input is handled by the program.
+The''' --bad-data''' parameter controls how invalid parameter input is
+handled by the program.
 * '''ignore''': Use invalid parameter values. Use with caution.
 * '''warn''': Issue a warning message, but use the invalid data anyway.
-* '''check''': Prompt the user interactively, and check if the invalid data should be used, or a new value re-entered.
+* '''check''': Prompt the user interactively, and check if the invalid
+data should be used, or a new value re-entered.
 * '''error''': Do not use invalid parameter values.
@@ Line 8,081: / Line 12,280: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Syntax
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| enumeration: '''ignore warn check error'''
+#000000;border-right:none;padding:0.0382in;"| Syntax
+|  enumeration:
+'''ignore warn check error'''
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| check
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| check
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| yangcli
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| yangcli
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"|  yangcli ----bad-data=warn
+#000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"|  yangcli ----bad-data=warn
 |}
 == --batch-mode ==
-The '''--batch-mode''' parameter specifies that the interactive CLI will not be used.
+The '''--batch-mode''' parameter specifies that the interactive CLI will
+not be used.
-Instead, if a script is provided with the 'run-script' parameter, or a command provided with the 'run-command' parameter, then it will be executed automatically before the program exits. This mode can be used to invoke NETCONF commands from Unix shell scripts.
+Instead, if a script is provided with the 'run-script' parameter, or a
+command provided with the 'run-command' parameter, then it will be
+executed automatically before the program exits. This mode can be used
+to invoke NETCONF commands from Unix shell scripts.
@@ Line 8,116: / Line 12,342: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Syntax
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| empty
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Syntax
+|  empty
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| yangcli
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| yangcli
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"|  yangcli --batch-mode \
+#000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"|  yangcli --batch-mode \
    --run-script=~/run-tests
 |}
 == --config ==
-The '''--config''' parameter specifies the name of a Yuma configuration file that contains more parameters to process, in addition to the CLI parameters.
+The '''--config''' parameter specifies the name of a Yuma configuration
+file that contains more parameters to process, in addition to the CLI
+parameters.
-Refer to the 'Configuration Files' section for details on the format of this file.
+Refer to the 'Configuration Files' section for details on the format of
+this file.
@@ Line 8,152: / Line 12,403: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Syntax
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| string: complete file specification of the text file to parse for more parameters.
+#000000;border-right:none;padding:0.0382in;"| Syntax
+|  string: complete
+file specification of the text file to parse for more parameters.
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| <nowiki>/etc/yuma/<program-name>.conf</nowiki>
+#000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"|
+<nowiki>/etc/yuma/<program-name>.conf</nowiki>
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| netconfdyangcliyangdiffyangdump
+#000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| netconfdyangcliyangdiffyangdump
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"|  yangcli testmod \
+#000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"|  yangcli testmod \
    --config=~/testconf.conf
 |}
 == --datapath ==
-The '''--datapath''' parameter specifies the directory search path to use while searching for data files. It consists of a colon (':') separated list of path specifications, commonly found in Unix, such as the '''$PATH''' environment variable.
+The '''--datapath''' parameter specifies the directory search path to
+use while searching for data files. It consists of a colon (':')
+separated list of path specifications, commonly found in Unix, such as
+the '''$PATH''' environment variable.
-This parameter overrides the '''$YUMA_DATAPATH''' environment variable, if it is present.
+This parameter overrides the '''$YUMA_DATAPATH''' environment variable,
+if it is present.
@@ Line 8,188: / Line 12,467: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Syntax
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| string: list of directory specifications
+#000000;border-right:none;padding:0.0382in;"| Syntax
+|  string: list of
+directory specifications
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| '''$YUMA_DATAPATH''' environment variable
+#000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| '''$YUMA_DATAPATH''' environment variable
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| netconfdyangcliyangdiffyangdump
+#000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| netconfdyangcliyangdiffyangdump
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"|  yangcli \
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"|  yangcli \
    --datapath=”~/work2:~/data”
 |}
 == --default-module ==
-The '''--default-module''' parameter specifies the module to search for identifiers, after the '''netconf''' and '''ncx''' modules have been checked. This allows a specific module to match identifier names first, before all modules are searched at once. This can avoid a collision if the same identifier value is used in more than one module.
+The '''--default-module''' parameter specifies the module to search for
+identifiers, after the '''netconf''' and '''ncx''' modules have been
+checked. This allows a specific module to match identifier names first,
+before all modules are searched at once. This can avoid a collision if
+the same identifier value is used in more than one module.
@@ Line 8,222: / Line 12,528: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Syntax
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| string: module name without any path or file extension included.
+#000000;border-right:none;padding:0.0382in;"| Syntax
+|  string: module
+name without any path or file extension included.
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| yangcli
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| yangcli
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"|  yangcli --default-module=testmod
+#000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"|  yangcli --default-module=testmod
 |}
 == --deviation ==
-The '''--deviation''' parameter is a leaf-list of modules that should be loaded automatically when the program starts, as a deviation module. In this mode, only the deviation statements are parsed and then made available later when the module that contains the objects being deviated is parsed.
+The '''--deviation''' parameter is a leaf-list of modules that should be
+loaded automatically when the program starts, as a deviation module. In
+this mode, only the deviation statements are parsed and then made
+available later when the module that contains the objects being deviated
+is parsed.
-The deviations must be known to the parser before the target module is parsed.
+The deviations must be known to the parser before the target module is
+parsed.
-This parameter is used to identify any modules that have deviation statements for the set of modules being parsed (e.g., '''--module''' and''' --subtree''' parameters).
+This parameter is used to identify any modules that have deviation
+statements for the set of modules being parsed (e.g., '''--module'''
+and''' --subtree''' parameters).
+A module can be listed with both the '''--module''' and
-A module can be listed with both the '''--module''' and '''--deviation''' parameters, but that is not needed unless the module contains external deviations. If the module only contains deviations for objects in the same module, then the''' --deviation '''parameter does not need to be used.
+'''--deviation''' parameters, but that is not needed unless the module
+contains external deviations. If the module only contains deviations for
+objects in the same module, then the''' --deviation '''parameter does
+not need to be used.
-The program will attempt to load each module in deviation parsing mode, in the order the parameters are entered.
+The program will attempt to load each module in deviation parsing mode,
+in the order the parameters are entered.
-For the '''netconfd''' program, If any modules have fatal errors then the program will terminate.
+For the '''netconfd''' program, If any modules have fatal errors then
+the program will terminate.
-For the '''yangdump '''and''' yangcli''' programs, each module will be processed as requested.
+For the '''yangdump '''and''' yangcli''' programs, each module will be
+processed as requested.
@@ Line 8,267: / Line 12,610: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Syntax
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| module name or filespec
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Syntax
+|  module name or
+filespec
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| unlimited
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| unlimited
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| netconfdyangcliyangdump
+#000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| netconfdyangcliyangdump
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"|  yangcli \
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"|  yangcli \
    --module=test1 \
    --deviation=test1_deviations
@@ Line 8,295: / Line 12,661: @@
 |}
 == --display-mode ==
-The '''--display-mode''' parameter controls how data is displayed in the program.
+The '''--display-mode''' parameter controls how data is displayed in the
+program.
-The qualified names (identifiers, idenitityref, XPath) within a text configuration can be generated several ways. This is needed because sibling nodes in different XML namespaces can have the same name.
+The qualified names (identifiers, idenitityref, XPath) within a text
+configuration can be generated several ways. This is needed because
+sibling nodes in different XML namespaces can have the same name.
 <center>'''--display-mode values'''</center>
@@ Line 8,303: / Line 12,672: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| <center>'''enum value'''</center>
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| <center>'''description'''</center>
-| style="border:0.5pt solid #000000;padding:0.0382in;"| <center>'''example'''</center>
+#000000;border-right:none;padding:0.0382in;"| <center>'''enum
+value'''</center>
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"|
+<center>'''description'''</center>
+|
+<center>'''example'''</center>
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| plain
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| no prefix, just local-name
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| sysBootError
+#000000;border-right:none;padding:0.0382in;"| plain
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| no prefix, just local-name
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| sysBootError
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| prefix
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| XML prefix and local-name
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| sys:sysBootError
+#000000;border-right:none;padding:0.0382in;"| prefix
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| XML prefix and local-name
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| sys:sysBootError
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| module
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| module name and local name
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| system:sysBootError
+#000000;border-right:none;padding:0.0382in;"| module
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| module name and local name
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| system:sysBootError
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| xml
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| XML format
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| <nowiki><sysBootError xmlns=”foo”></nowiki>
+#000000;border-right:none;padding:0.0382in;"| xml
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| XML format
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| <nowiki><sysBootError xmlns=”foo”></nowiki>
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| xml-nons
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| XML format without namespace (xmlns) attributes
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| <nowiki><sysBootError></nowiki>
+#000000;border-right:none;padding:0.0382in;"| xml-nons
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| XML format without
+namespace (xmlns) attributes
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| <nowiki><sysBootError></nowiki>
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| json
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| JSON format
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| { “sysBootError” : “blah” }
+#000000;border-right:none;padding:0.0382in;"| json
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| JSON format
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| { “sysBootError” : “blah” }
 |}
-When saving configuration files in non-volatile storage, then it is suggested that only 'module' or 'xml' modes be used, since these are the only deterministic modes.
+When saving configuration files in non-volatile storage, then it is
+suggested that only 'module' or 'xml' modes be used, since these are the
+only deterministic modes.
-The set of XML prefixes in use at any one time is not persistent, and cannot be relied upon, unless the namespace declarations are saved (xml mode) or the module names are saved (module mode).
+The set of XML prefixes in use at any one time is not persistent, and
+cannot be relied upon, unless the namespace declarations are saved (xml
+mode) or the module names are saved (module mode).
@@ Line 8,348: / Line 12,765: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Syntax
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| enumeration: '''plain prefix module xml xml-nons json'''
+#000000;border-right:none;padding:0.0382in;"| Syntax
+|  enumeration:
+'''plain prefix module xml xml-nons json'''
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| plain
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| plain
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| yangcli
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| yangcli
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"|  yangcli --display-mode=module
+#000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"|  yangcli --display-mode=module
 |}
 == --feature-disable ==
-The '''--feature-disable''' parameter directs all programs to disable a specific feature.
+The '''--feature-disable''' parameter directs all programs to disable a
+specific feature.
-This parameter is a formatted string containing a module name, followed by a colon ':', followed by a feature name, e.g.,
+This parameter is a formatted string containing a module name, followed
+by a colon ':', followed by a feature name, e.g.,
@@ Line 8,382: / Line 12,824: @@
-It is an error if a '''--feature-enable''' and '''--feature-disable''' parameter specify the same feature.
+It is an error if a '''--feature-enable''' and '''--feature-disable'''
+parameter specify the same feature.
 Parameters for unknown features will be ignored.
@@ Line 8,391: / Line 12,834: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Syntax
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| formatted string (module:feature
+#000000;border-right:none;padding:0.0382in;"| Syntax
+|  formatted string
+(module:feature
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| unlimited
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| unlimited
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| yangcliyangdiffyangdumpnetconfd
+#000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| yangcliyangdiffyangdumpnetconfd
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"|  yangcli --feature-disable=test:feature1
+#000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"|  yangcli --feature-disable=test:feature1
 |}
 == --feature-enable ==
-The '''--feature-enable''' parameter directs all programs to enable a specific feature.
+The '''--feature-enable''' parameter directs all programs to enable a
+specific feature.
-This parameter is a formatted string containing a module name, followed by a colon ':', followed by a feature name, e.g.,
+This parameter is a formatted string containing a module name, followed
+by a colon ':', followed by a feature name, e.g.,
@@ Line 8,425: / Line 12,893: @@
-It is an error if a '''--feature-disable''' and '''--feature-enable''' parameter specify the same feature.
+It is an error if a '''--feature-disable''' and '''--feature-enable'''
+parameter specify the same feature.
 Parameters for unknown features will be ignored.
@@ Line 8,434: / Line 12,903: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Syntax
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| formatted string (module:feature
+#000000;border-right:none;padding:0.0382in;"| Syntax
+|  formatted string
+(module:feature
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| unlimited
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| unlimited
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| yangcliyangdiffyangdumpnetconfd
+#000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| yangcliyangdiffyangdumpnetconfd
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"|  yangcli--feature-enable=test:feature1
+#000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"|  yangcli--feature-enable=test:feature1
 |}
 == --feature-enable-default ==
-The '''--feature-enable-default''' parameter controls how '''yangdump''' will generate C code for YANG features by default.
+The '''--feature-enable-default''' parameter controls how '''yangdump'''
+will generate C code for YANG features by default.
 If 'true', then by default, features will be enabled.
@@ Line 8,466: / Line 12,959: @@
 If 'false', then by default, features will be disabled.
-If a '''--feature-enable''' or '''--feature-disable''' parameter is present for a specific feature, then this parameter will be ignored for that feature.
+If a '''--feature-enable''' or '''--feature-disable''' parameter is
+present for a specific feature, then this parameter will be ignored for
+that feature.
@@ Line 8,473: / Line 12,968: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Syntax
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| boolean (true or false)
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Syntax
+|  boolean (true or
+false)
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| TRUE
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| TRUE
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| yangcliyangdiffyangdumpnetconfd
+#000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| yangcliyangdiffyangdumpnetconfd
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"|  yangcli \
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"|  yangcli \
     --feature-enable-default=false
 |}
 == --fixorder ==
-The '''--fixorder''' parameter controls whether PDU parameters will be automatically sent in NETCONF PDUs in the correct order.
+The '''--fixorder''' parameter controls whether PDU parameters will be
+automatically sent in NETCONF PDUs in the correct order.
 If 'true', the schema-defined, canonical order will be used.
-If 'false', the specified order that parameters are entered will be used for the PDU order as well.
+If 'false', the specified order that parameters are entered will be used
+for the PDU order as well.
@@ Line 8,511: / Line 13,031: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Syntax
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| boolean (true or false)
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Syntax
+|  boolean (true or
+false)
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| TRUE
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| TRUE
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| yangcli
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| yangcli
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"|  yangcli --fixorder=false
+#000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"|  yangcli --fixorder=false
 |}
 == --force-target ==
-The '''--force-target''' parameter controls whether the candidate or running configuration datastore will be used as the default edit target, when both are supported by the server.
+The '''--force-target''' parameter controls whether the candidate or
+running configuration datastore will be used as the default edit target,
+when both are supported by the server.
@@ Line 8,544: / Line 13,089: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Syntax
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| enum (candidate or running)
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Syntax
+|  enum (candidate
+or running)
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| candidate
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| candidate
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| yangcli
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| yangcli
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"|  yangcli --force-target=running
+#000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"|  yangcli --force-target=running
 |}
 == --help ==
-The '''--help''' parameter causes program help text to be printed, and then the program will exit instead of running as normal.
+The '''--help''' parameter causes program help text to be printed, and
+then the program will exit instead of running as normal.
-This parameter can be combined with the '''--help-mode''' parameter to control the verbosity of the help text. Use '''--brief''' for less, and '''--full '''for more than the normal verbosity.
+This parameter can be combined with the '''--help-mode''' parameter to
+control the verbosity of the help text. Use '''--brief''' for less, and
+'''--full '''for more than the normal verbosity.
-This parameter can be combined with the '''--version''' parameter in all programs. It can also be combined with the '''--show-errors''' parameter in '''yangdump'''.
+This parameter can be combined with the '''--version''' parameter in all
+programs. It can also be combined with the '''--show-errors''' parameter
+in '''yangdump'''.
-The program configuration parameters will be displayed in alphabetical order, not in schema order.
+The program configuration parameters will be displayed in alphabetical
+order, not in schema order.
@@ Line 8,583: / Line 13,157: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Syntax
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| empty
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Syntax
+|  empty
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| netconfdyangcliyangdiffyangdump
+#000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| netconfdyangcliyangdiffyangdump
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"|  yangcli --help
+#000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"|  yangcli --help
 |}
 == --help-mode ==
-The '''--help-mode''' parameter is used to control the amount of detail printed when help text is requested in some command. It is always used with another command, and makes no sense by itself. It is ignored unless used with the '''--help''' parameter.
+The '''--help-mode''' parameter is used to control the amount of detail
+printed when help text is requested in some command. It is always used
+with another command, and makes no sense by itself. It is ignored unless
+used with the '''--help''' parameter.
@@ Line 8,616: / Line 13,215: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Syntax
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| choice of 3 empty leafs
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Syntax
+|  choice of 3
+empty leafs
 '''--brief --normal --full'''
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| normal
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| normal
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| netconfdyangcliyangdiffyangdump
+#000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| netconfdyangcliyangdiffyangdump
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"|  yangcli --help --help-mode=full
+#000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"|  yangcli --help --help-mode=full
 |}
@@ Line 8,647: / Line 13,269: @@
 ** '''brief'''
 *** type: empty
-*** This parameter specifies that brief documentation mode should be used.
+*** This parameter specifies that brief documentation mode should be
+used.
 ** '''normal'''
 *** type: empty
-*** This parameter specifies that normal documentation mode should be used.
+*** This parameter specifies that normal documentation mode should be
+used.
 ** '''full'''
 *** type: empty
-*** This parameter specifies that full documentation mode should be used.
+*** This parameter specifies that full documentation mode should be
+used.
 == --indent ==
-The '''--indent''' parameter specifies the number of spaces that will be used to add to the indentation level, each time a child node is printed during program operation.
+The '''--indent''' parameter specifies the number of spaces that will be
+used to add to the indentation level, each time a child node is printed
+during program operation.
 <center>'''--indent parameter'''</center>
@@ Line 8,662: / Line 13,289: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Syntax
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| uint32 (0 .. 9)
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Syntax
+|  uint32 (0 .. 9)
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 3
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 3
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| netconfdyangcliyangdiffyangdump
+#000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| netconfdyangcliyangdiffyangdump
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"|  yangcli --indent=4
+#000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"|  yangcli --indent=4
 |}
 == --log ==
-The '''--log''' parameter specifies the file name to be used for logging program messages, instead of STDOUT. It can be used with the optional''' --log-append''' and '''--log-level''' parameters to control how the log file is written.
+The '''--log''' parameter specifies the file name to be used for logging
+program messages, instead of STDOUT. It can be used with the optional'''
+--log-append''' and '''--log-level''' parameters to control how the log
+file is written.
@@ Line 8,695: / Line 13,347: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Syntax
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| string: log file specification
+#000000;border-right:none;padding:0.0382in;"| Syntax
+|  string: log file
+specification
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| netconfdyangcliyangdiffyangdump
+#000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| netconfdyangcliyangdiffyangdump
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"|  yangcli --log=~/test.log&
+#000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"|  yangcli --log=~/test.log&
 |}
 == --log-append ==
-The '''--log-append''' parameter specifies that the existing log file (if any) should be appended , instead of deleted. It is ignored unless the '''--log''' parameter is present.
+The '''--log-append''' parameter specifies that the existing log file
+(if any) should be appended , instead of deleted. It is ignored unless
+the '''--log''' parameter is present.
@@ Line 8,728: / Line 13,405: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Syntax
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| empty
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Syntax
+|  empty
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| netconfdyangcliyangdiffyangdump
+#000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| netconfdyangcliyangdiffyangdump
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"|  yangcli --log-append \
+#000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"|  yangcli --log-append \
    --log=~/test.log&
 |}
 == --log-level ==
-The '''--log-level''' parameter controls the verbosity level of messages printed to the log file or STDOUT, if no log file is specified.
+The '''--log-level''' parameter controls the verbosity level of messages
+printed to the log file or STDOUT, if no log file is specified.
-The log levels are incremental, meaning that each higher level includes everything from the previous level, plus additional messages.
+The log levels are incremental, meaning that each higher level includes
+everything from the previous level, plus additional messages.
 There are 7 settings that can be used:
 * '''none''': All logging is suppressed. Use with extreme caution!
-* '''error''': Error messages are printed, indicating problems that require attention.
+* '''error''': Error messages are printed, indicating problems that
+require attention.
-* '''warn''': Warning messages are printed, indicating problems that may require attention.
-* '''info''': Informational messages are printed, that indicate program status changes.
+* '''warn''': Warning messages are printed, indicating problems that may
+require attention.
-* '''debug''': Debugging messages are printed that indicate program activity.
+* '''info''': Informational messages are printed, that indicate program
+status changes.
+* '''debug''': Debugging messages are printed that indicate program
+activity.
 * '''debug2''': Protocol debugging and trace messages are enabled.
-* '''debug3''': Very verbose debugging messages are enabled. This has an impact on resources and performance, and should be used with caution.
+* '''debug3''': Very verbose debugging messages are enabled. This has an
+impact on resources and performance, and should be used with caution.
 * '''debug4''': Maximum debugging messages are enabled.
@@ Line 8,774: / Line 13,480: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Syntax
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| enumeration: '''off error warn info debug debug2 debug3'''
+#000000;border-right:none;padding:0.0382in;"| Syntax
+|  enumeration:
+'''off error warn info debug debug2 debug3'''
 '''debug4'''
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| --info (--debug for DEBUG builds)
+#000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| --info (--debug for DEBUG builds)
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| netconfdyangcliyangdiffyangdump
+#000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| netconfdyangcliyangdiffyangdump
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"|  yangcli --log-level=debug \
+#000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"|  yangcli --log-level=debug \
    --log=~/test.log&
 |}
 == --match-names ==
-The '''--match-names''' parameter specifies how names are matched when performing UrlPath searches.
+The '''--match-names''' parameter specifies how names are matched when
+performing UrlPath searches.
 The following values are supported::
@@ Line 8,809: / Line 13,539: @@
 * '''exact'''
-The name must exactly match the node name for all characters in both name strings.
+The name must exactly match the node name for all characters in both
+name strings.
 * '''exact-nocase'''
-The name must match the node name for all characters in both name strings.
+The name must match the node name for all characters in both name
+strings.
 Strings are not case-sensitive.
@@ Line 8,819: / Line 13,551: @@
 * '''one'''
-The name must exactly match the first N characters of just one node name, which must be the only partial name match found.
+The name must exactly match the first N characters of just one node
+name, which must be the only partial name match found.
 * '''one-nocase'''
-The name must exactly match the first N characters of just one node name, which
+The name must exactly match the first N characters of just one node
+name, which
-must be the only partial name match found. Strings are not case-sensitive.
+must be the only partial name match found. Strings are not
+case-sensitive.
 * '''first'''
-The name must exactly match the first N characters of any node name. The first one
+The name must exactly match the first N characters of any node name. The
+first one
 found will be used.
@@ Line 8,835: / Line 13,571: @@
 * '''first-nocase'''
-The name must exactly match the first N characters of any node name. The first one
+The name must exactly match the first N characters of any node name. The
+first one
 found will be used. Strings are not case-sensitive.
@@ Line 8,844: / Line 13,581: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Syntax
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| enum: exact exact-nocase one one-nocase first
+#000000;border-right:none;padding:0.0382in;"| Syntax
+|  enum: exact
+exact-nocase one one-nocase first
 first-nocase
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| one-nocase
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| one-nocase
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| yangcli
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| yangcli
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"|  yangcli --match-names=exact
+#000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"|  yangcli --match-names=exact
 |}
 == --modpath ==
-The '''--modpath''' parameter specifies the YANG module search path to use while searching for YANG files. It consists of a colon (':') separated list of path specifications, commonly found in Unix, such as the '''$PATH''' environment variable.
+The '''--modpath''' parameter specifies the YANG module search path to
+use while searching for YANG files. It consists of a colon (':')
+separated list of path specifications, commonly found in Unix, such as
+the '''$PATH''' environment variable.
-This parameter overrides the '''$YUMA_MODPATH''' environment variable, if it is present.
+This parameter overrides the '''$YUMA_MODPATH''' environment variable,
+if it is present.
 <center>'''--modpath parameter'''</center>
@@ Line 8,880: / Line 13,644: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Syntax
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| string: list of directory specifications
+#000000;border-right:none;padding:0.0382in;"| Syntax
+|  string: list of
+directory specifications
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| '''$YUMA_MODPATH''' environment variable
+#000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| '''$YUMA_MODPATH''' environment variable
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| netconfdyangcliyangdiffyangdump
+#000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| netconfdyangcliyangdiffyangdump
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"|  yangcli \
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"|  yangcli \
    --modpath=”~/testmodules:~/modules:~/trunk/netconf/modules”
 |}
 == --module ==
-The '''--module''' parameter is a leaf-list of modules that should be loaded automatically when the program starts.
+The '''--module''' parameter is a leaf-list of modules that should be
+loaded automatically when the program starts.
-The program will attempt to load each module in the order the parameters were entered.
+The program will attempt to load each module in the order the parameters
+were entered.
-For the '''netconfd''' program, If any modules have fatal errors then the program will terminate.
+For the '''netconfd''' program, If any modules have fatal errors then
+the program will terminate.
-For the '''yangdump''' program, each module will be processed as requested.
+For the '''yangdump''' program, each module will be processed as
+requested.
@@ Line 8,920: / Line 13,711: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Syntax
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| module name or filespec
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Syntax
+|  module name or
+filespec
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| unlimited
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| unlimited
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| netconfdyangcliyangdump
+#000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| netconfdyangcliyangdump
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"|  yangcli \
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"|  yangcli \
    --module=test1 \
    --module=test2
@@ Line 8,948: / Line 13,762: @@
 |}
 == --ncport ==
-The '''--ncport''' parameter specifies the TCP port number that should be used for NETCONF sessions.
+The '''--ncport''' parameter specifies the TCP port number that should
+be used for NETCONF sessions.
-This parameter specifies the TCP port number to use when a NETCONF session is created during the startup of the program. The parameter can only be entered once.
+This parameter specifies the TCP port number to use when a NETCONF
+session is created during the startup of the program. The parameter can
+only be entered once.
@@ Line 8,957: / Line 13,774: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Syntax
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| uint32
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Syntax
+|  uint32
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 830
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 830
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| yangcli
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| yangcli
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"|  yangcli --server=myserver
+#000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"|  yangcli --server=myserver
    --ncport=22 \
    --user=fred
@@ Line 8,986: / Line 13,825: @@
 |}
 == --password ==
-The '''--password''' parameter specifies the password string that should be used when a NETCONF session is connected during the startup of the program.
+The '''--password''' parameter specifies the password string that should
+be used when a NETCONF session is connected during the startup of the
+program.
@@ Line 8,993: / Line 13,834: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Syntax
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| string
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Syntax
+|  string
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| yangcli
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| yangcli
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"|  yangcli --server=myserver \
+#000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"|  yangcli --server=myserver \
    --password=yangrocks \
    --user=andy
@@ Line 9,021: / Line 13,884: @@
 |}
 == --private-key ==
-The '''--private-key''' parameter specifies the file path specification for the file containing the client-side private key.
+The '''--private-key''' parameter specifies the file path specification
+for the file containing the client-side private key.
-If both 'public-key' and 'private-key' files are present, the client will attempt to connect to the server using these keys. If this fails, or not done, then password authentication will be attempted.
+If both 'public-key' and 'private-key' files are present, the client
+will attempt to connect to the server using these keys. If this fails,
+or not done, then password authentication will be attempted.
@@ Line 9,030: / Line 13,896: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Syntax
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| string
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Syntax
+|  string
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| $HOME/.ssh/id_rsa
+#000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| $HOME/.ssh/id_rsa
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| yangcli
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| yangcli
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"|  yangcli –private-key=~/.ssh/mykey
+#000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"|  yangcli –private-key=~/.ssh/mykey
 |}
 == --protocols ==
-The '''--protocols''' parameter specifies which protocol versions the program or session will attempt to use. Empty set is not allowed.
+The '''--protocols''' parameter specifies which protocol versions the
+program or session will attempt to use. Empty set is not allowed.
 <center>'''--protocols parameter'''</center>
@@ Line 9,062: / Line 13,951: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Syntax
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| bits
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Syntax
+|  bits
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| “netconf1.0 netconf1.1”
+#000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| “netconf1.0 netconf1.1”
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| netconfdyangcli
+#000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| netconfdyangcli
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"|  yangcli –protocols=netconf1.0
+#000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"|  yangcli –protocols=netconf1.0
 |}
 == --public-key ==
-The '''--public-key''' parameter specifies the file path specification for the file containing the client-side public key.
+The '''--public-key''' parameter specifies the file path specification
+for the file containing the client-side public key.
-If both 'public-key' and 'private-key' files are present, the client will attempt to connect to the server using these keys. If this fails, or not done, then password authentication will be attempted.
+If both 'public-key' and 'private-key' files are present, the client
+will attempt to connect to the server using these keys. If this fails,
+or not done, then password authentication will be attempted.
@@ Line 9,097: / Line 14,011: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Syntax
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| string
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Syntax
+|  string
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| $HOME/.ssh/id_rsa.pub
+#000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| $HOME/.ssh/id_rsa.pub
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| yangcli
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| yangcli
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"|  yangcli –public-key=~/.ssh/mykey.pub
+#000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"|  yangcli –public-key=~/.ssh/mykey.pub
 |}
 == --runpath ==
-The '''--runpath''' parameter specifies the directory search path to use while searching for script files. It consists of a colon (':') separated list of path specifications, commonly found in Unix, such as the '''$PATH''' environment variable.
+The '''--runpath''' parameter specifies the directory search path to use
+while searching for script files. It consists of a colon (':') separated
+list of path specifications, commonly found in Unix, such as the
+'''$PATH''' environment variable.
-This parameter overrides the '''$YUMA_RUNPATH''' environment variable, if it is present.
+This parameter overrides the '''$YUMA_RUNPATH''' environment variable,
+if it is present.
@@ Line 9,132: / Line 14,072: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Syntax
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| string: list of directory specifications
+#000000;border-right:none;padding:0.0382in;"| Syntax
+|  string: list of
+directory specifications
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| '''$YUMA_RUNPATH''' environment variable
+#000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| '''$YUMA_RUNPATH''' environment variable
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| netconfdyangcliyangdiffyangdump
+#000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| netconfdyangcliyangdiffyangdump
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"|  yangcli \
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"|  yangcli \
    --runpath=”~/testscripts”
 |}
 == --run-command ==
-The '''--run-command '''parameter specifies a command will be invoked upon startup.
+The '''--run-command '''parameter specifies a command will be invoked
+upon startup.
-In the '''yangcli''' program, if the auto-connect parameters are provided, then a session will be established before running the command.
+In the '''yangcli''' program, if the auto-connect parameters are
+provided, then a session will be established before running the command.
@@ Line 9,168: / Line 14,133: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Syntax
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| string
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Syntax
+|  string
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| yangcli
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| yangcli
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"|  yangcli \
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"|  yangcli \
    --run-command="history
    load=~/test3-history"
@@ Line 9,196: / Line 14,183: @@
 |}
 == --run-script ==
-The '''--run-script '''parameter specifies a script will be invoked upon startup.
+The '''--run-script '''parameter specifies a script will be invoked upon
+startup.
-In the '''yangcli''' program, if the auto-connect parameters are provided, then a session will be established before running the script.
+In the '''yangcli''' program, if the auto-connect parameters are
+provided, then a session will be established before running the script.
@@ Line 9,205: / Line 14,194: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Syntax
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| string (file specification)
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Syntax
+|  string (file
+specification)
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| yangcli
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| yangcli
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"|  yangcli \
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"|  yangcli \
    --run-script="test3-start"
 |}
 == --server ==
-The '''--server''' parameter specifies the IP address or DNS name of the NETCONF server that should be connected to automatically, when the program starts.
+The '''--server''' parameter specifies the IP address or DNS name of the
+NETCONF server that should be connected to automatically, when the
+program starts.
@@ Line 9,239: / Line 14,253: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Syntax
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| string:IP address or DNS name
+#000000;border-right:none;padding:0.0382in;"| Syntax
+|  string:IP
+address or DNS name
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| yangcli
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| yangcli
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"|  yangcli --server=myserver
+#000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"|  yangcli --server=myserver
 |}
 == --subdirs ==
-The '''--subdirs''' parameter controls whether sub-directories should be searched or not, if they are found during a module search.
+The '''--subdirs''' parameter controls whether sub-directories should be
+searched or not, if they are found during a module search.
-If false, the file search paths for modules, scripts, and data files will not include sub-directories if they exist in the specified path.
+If false, the file search paths for modules, scripts, and data files
+will not include sub-directories if they exist in the specified path.
@@ Line 9,274: / Line 14,313: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Syntax
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| boolean
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Syntax
+|  boolean
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| TRUE
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| TRUE
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| yangdump
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| yangdump
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"|  yangcli  --subdirs=false
+#000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"|  yangcli  --subdirs=false
 |}
 == --time-rpcs ==
+The '''--time-rpcs'''<nowiki> parameter is used to measure the
-The '''--time-rpcs'''<nowiki> parameter is used to measure the round-trip time of each <rpc> request and </nowiki><nowiki><rpc-reply> at the session level. Echo the elapsed time value to screen if in interactive mode, as well as the log if the log is a file instead of stdout. </nowiki>The $$time-rpcs system variable is derived from this parameter.";
+round-trip time of each <rpc> request and </nowiki><nowiki><rpc-reply>
+at the session level. Echo the elapsed time value to screen if in
+interactive mode, as well as the log if the log is a file instead of
+stdout. </nowiki>The $$time-rpcs system variable is derived from this
+parameter.";
@@ Line 9,307: / Line 14,373: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Syntax
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| boolean
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Syntax
+|  boolean
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| FALSE
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| FALSE
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| yangcli
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| yangcli
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"|  yangcli --time-rpcs=true
+#000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"|  yangcli --time-rpcs=true
 |}
 == --timeout ==
-The '''--timeout''' parameter specifies the number of seconds that should pass before giving up on a response during a NETCONF session. The value zero means wait forever (no timeout).
+The '''--timeout''' parameter specifies the number of seconds that
+should pass before giving up on a response during a NETCONF session. The
+value zero means wait forever (no timeout).
@@ Line 9,340: / Line 14,430: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Syntax
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| uint32 (0 for no timeout; otherwise number of seconds to wait)
+#000000;border-right:none;padding:0.0382in;"| Syntax
+|  uint32 (0 for no
+timeout; otherwise number of seconds to wait)
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 30 seconds
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 30 seconds
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| yangcli
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| yangcli
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"|  yangcli --timeout=0
+#000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"|  yangcli --timeout=0
 |}
 == --transport ==
-The '''--transport''' parameter specifies the NETCONF transport protocol to use.
+The '''--transport''' parameter specifies the NETCONF transport protocol
+to use.
 This parameter is also supported in the 'connect' command.
@@ Line 9,373: / Line 14,487: @@
 # ssh: standard NETCONF SSH transport (RFC 4742 or RFC 6242)
-# tcp: tail-f NETCONF over TCP transport<br/> Note that '''netconfd''' does not support this transport protocol!
+# tcp: tail-f NETCONF over TCP transport<br/> Note that '''netconfd'''
+does not support this transport protocol!
 I
@@ Line 9,381: / Line 14,496: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Syntax
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| Enum (ssh or tcp)
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Syntax
+|  Enum (ssh or
+tcp)
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| ssh
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| ssh
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| yangcli
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| yangcli
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"|  yangcli --transport=tcp
+#000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"|  yangcli --transport=tcp
 |}
 == --use-xmlheader ==
-The '''--use-xmlheader''' parameter specifies how file result variables will be written for XML files.
+The '''--use-xmlheader''' parameter specifies how file result variables
+will be written for XML files.
 Controls whether the XML preamble header will be written or not.
@@ Line 9,416: / Line 14,555: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Syntax
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| boolean
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Syntax
+|  boolean
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| TRUE
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| TRUE
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| yangcli
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| yangcli
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"|  yangcli --use-xmlheader=false
+#000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"|  yangcli --use-xmlheader=false
 |}
 == --user ==
-The '''--user''' parameter specifies the user name string on the NETCONF server that should be used when establishing a NETCONF session.
+The '''--user''' parameter specifies the user name string on the NETCONF
+server that should be used when establishing a NETCONF session.
@@ Line 9,449: / Line 14,611: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Syntax
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| string:user name
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Syntax
+|  string:user name
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| yangcli
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| yangcli
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"|  yangcli --user=admin \
+#000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"|  yangcli --user=admin \
    --server=myserver
 |}
 == --uservars-file ==
-The '''--uservars-file''' parameter contains the file specification of the user global variables XML file to use.
+The '''--uservars-file''' parameter contains the file specification of
+the user global variables XML file to use.
@@ Line 9,483: / Line 14,668: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Syntax
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| string:filespec
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Syntax
+|  string:filespec
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| $HOME/.yuma/yangcli_uservars.xml
+#000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| $HOME/.yuma/yangcli_uservars.xml
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| yangcli
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| yangcli
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"|  yangcli –uservars-file=~/myvars.xml
+#000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"|  yangcli –uservars-file=~/myvars.xml
 |}
 == --version ==
-The '''--version''' parameter causes the program version string to be printed, and then the program will exit instead of running as normal.
+The '''--version''' parameter causes the program version string to be
+printed, and then the program will exit instead of running as normal.
 All Yuma version strings use the same format:
@@ Line 9,531: / Line 14,739: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Syntax
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| empty
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Syntax
+|  empty
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| netconfdyangcliyangdiffyangdump
+#000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| netconfdyangcliyangdiffyangdump
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"|  yangcli --version
+#000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"|  yangcli --version
 |}
 == --warn-idlen ==
-The''' --warn-idlen''' parameter controls whether identifier length warnings will be generated.
+The''' --warn-idlen''' parameter controls whether identifier length
+warnings will be generated.
-The value zero disables all identifier length checking. If non-zero, then a warning will be generated if an identifier is defined which has a length is greater than this amount.
+The value zero disables all identifier length checking. If non-zero,
+then a warning will be generated if an identifier is defined which has a
+length is greater than this amount.
 <center>'''--warn-idlen parameter'''</center>
@@ Line 9,565: / Line 14,798: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Syntax
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| uint32: 0 to disable, or 8 .. 1023
+#000000;border-right:none;padding:0.0382in;"| Syntax
+|  uint32: 0 to
+disable, or 8 .. 1023
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 64
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 64
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| netconfdyangcliyangdiffyangdump
+#000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| netconfdyangcliyangdiffyangdump
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"|  yangcli --warn-idlen=50
+#000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"|  yangcli --warn-idlen=50
 |}
 == --warn-linelen ==
-The''' --warn-linelen''' parameter controls whether line length warnings will be generated.
+The''' --warn-linelen''' parameter controls whether line length warnings
+will be generated.
-The value zero disables all line length checking. If non-zero, then a warning will be generated if a YANG file line is entered which has a length is greater than this amount.
+The value zero disables all line length checking. If non-zero, then a
+warning will be generated if a YANG file line is entered which has a
+length is greater than this amount.
 Tab characters are counted as 8 spaces.
@@ Line 9,602: / Line 14,861: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Syntax
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| uint32: 0 to disable, or 40 .. 4095
+#000000;border-right:none;padding:0.0382in;"| Syntax
+|  uint32: 0 to
+disable, or 40 .. 4095
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 72
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 72
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| netconfdyangcliyangdiffyangdump
+#000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| netconfdyangcliyangdiffyangdump
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"|  yangcli --warn-linelen=79
+#000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"|  yangcli --warn-linelen=79
 |}
@@ Line 9,630: / Line 14,912: @@
 The''' --warn-off''' parameter suppresses a specific warning number.
-The error and warning numbers, and the default messages, can be viewed with the yangdump program by using the '''--show-errors''' configuration parameter.
+The error and warning numbers, and the default messages, can be viewed
+with the yangdump program by using the '''--show-errors''' configuration
+parameter.
-The specific warning message will be disabled for all modules. No message will be printed and the warning will not count towards the total for that module.
+The specific warning message will be disabled for all modules. No
+message will be printed and the warning will not count towards the total
+for that module.
@@ Line 9,639: / Line 14,925: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Syntax
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| uint32: 400 .. 899
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Syntax
+|  uint32: 400 ..
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| none
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| none
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 499
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 499
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| netconfdyangcliyangdiffyangdump
+#000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| netconfdyangcliyangdiffyangdump
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"|  yangcli --warn-off=435
+#000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"|  yangcli --warn-off=435
  <nowiki># revision order not descending</nowiki>
 |}
 == --yuma-home ==
-The '''--yuma-home''' parameter specifies the project directory root to use when searching for files.
+The '''--yuma-home''' parameter specifies the project directory root to
+use when searching for files.
-If present, this directory location will override the ''''$YUMA_HOME''' environment variable, if it is set. If this parameter is set to a zero-length string, then the $'''YUMA_HOME''' environment variable will be ignored.
+If present, this directory location will override the ''''$YUMA_HOME'''
+environment variable, if it is set. If this parameter is set to a
+zero-length string, then the $'''YUMA_HOME''' environment variable will
+be ignored.
-The following directories are searched when either the '''$YUMA_HOME''' environment variable or this parameter is set:
+The following directories are searched when either the '''$YUMA_HOME'''
+environment variable or this parameter is set:
 * '''$YUMA_HOME/modules'''
@@ Line 9,683: / Line 14,997: @@
-{| style="border-spacing:0;"
+{| class=wikitable border="1"
-| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Syntax
+| style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border:0.5pt solid #000000;padding:0.0382in;"| string: directory specification
+#000000;border-right:none;padding:0.0382in;"| Syntax
+|  string:
+directory specification
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| '''$YUMA_HOME''' environment variable
+#000000;border-right:none;padding:0.0382in;"| Default:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| '''$YUMA_HOME''' environment variable
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 0
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Min Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 0
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| 1
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Max Allowed:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| 1
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"| netconfdyangcliyangdiffyangdump
+#000000;border-right:none;padding:0.0382in;"| Supported by:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"| netconfdyangcliyangdiffyangdump
 |-
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
-| style="border-top:none;border-bottom:0.5pt solid #000000;border-left:0.5pt solid #000000;border-right:0.5pt solid #000000;padding:0.0382in;"|  yangcli \
+#000000;border-left:0.5pt solid
+#000000;border-right:none;padding:0.0382in;"| Example:
+| style="border-top:none;border-bottom:0.5pt solid
+#000000;border-left:0.5pt solid #000000;border-right:0.5pt solid
+#000000;padding:0.0382in;"|  yangcli \
    --yuma-home=~/sw/netconf \
    --log=~/test.log&

style="border-top:0.5pt solid #000000;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| command	default parameter
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| alias	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| var
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| aliases	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| show
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| cd	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| dir
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| connect	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| server
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| create	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| target
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| elif	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| expr
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| else	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| expr
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| if	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| expr
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| eventlog	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| show
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| fill	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| target
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| help	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| command
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| history	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| show
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| insert	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| target
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| load	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| module
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| log-debug	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| msg
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| log-error	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| msg
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| log-info	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| msg
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| log-warn	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| msg
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| merge	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| target
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| mgrload	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| module
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| recall	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| index
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| replace	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| target
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| run	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| script
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| set-log-level	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| log-level
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| sget	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| target
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| sget-config	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| target
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| xget	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| select
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| xget-config	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| select
style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid 000000;border-right:none;padding:0.0382in;"\| while	style="border-top:none;border-bottom:0.5pt solid 000000;border-left:0.5pt solid #000000;border-right:0.5pt solid 000000;padding:0.0382in;"\| expr

Difference between revisions of "Yuma yangcli Manual"

Revision as of 19:55, 13 April 2017

Contents

Preface

Legal Statements

Additional Resources

WEB Sites

Mailing Lists

Conventions Used in this Document

yangcli User Guide

Introduction

Features

Starting yangcli

Stopping yangcli

Statements

Commands

Variables

Files

Scripts

Configuration Parameter List

Invoking Commands

Command Prompt

Command Name

ncx:default-parm Extension

Parameter Mode Escape Commands

Using XPath Expressions

Special Parameter Handling

Command Completion

Command Line Editing

Command History

Command Responses

NETCONF Sessions

Connection Startup Screen

Server Tailored Context

Retrieving Data

Modifying Data

Using Notifications

Configuration Parameters That Affect Sessions

Trouble-shooting NETCONF Session Problems

Command Reference

alias

aliases

cd

close-session

commit

connect

copy-config

create

create-subscription

delete

delete-config

discard-changes

edit-config

elif

else

end

eval

eventlog

fill

get

get-config

get-locks

get-my-session

get-schema

help

history

if

insert

kill-session

list

load

lock

log-debug

log-error

log-info

log-warn

merge

mgrload

no-op

pwd